Supermicro 4U Rackmount SuperServer SYS-F618R2-R72+
Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor
• Up to 2TB ECC 3DS LRDIMM; 16x DIMM slots
• 6x Hot-swap 2.5" SAS2 HDD Bays via Broadcom 2208
• 3x heavy duty internal fans
• 1620W Redundant Power Supplies Platinum Level (94%)
Product SKU
| |
---|---|
SYS-F618R2-R72+ | • SuperServer F618R2-R72+ (Black) |
Motherboard
| |
---|---|
• Super X10DRFR |
Processor/Cache
|
|
---|---|
CPU | • Intel® Xeon® processor E5-2600 v4 / v3 family (up to 145W TDP) • Dual Socket R3 (LGA 2011) |
Cores/Cache | • Up to 22 Cores / Up to 55MB Cache |
System Bus | • QPI up to 9.6 GT/s |
BIOS version 2.0 or above is required | |
Note | Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
System Memory
| |
---|---|
Memory Capacity | • Memory
Memory Capacity 16x 288-pin DDR4 DIMM slots
• Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM |
Memory Type |
• 2400 /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB |
Memory Voltage | • 1.2 V |
Error Detection | • Corrects single-bit errors |
On-Board Devices
| Chipset | • Intel® C612 chipset |
---|---|
SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
SAS | • SAS2 via Broadcom 2208 (1GB cache) • SAS2 via Broadcom 2208 (1GB cache) HW RAID 0, 1, 5, 6, 10, 50 support |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 |
Network Controllers |
• Intel® i350-AM2 Dual Port Gigabit Ethernet |
Graphics | • ASPEED AST2400 BMC |
Input/Output (per node)
| Serial ATA | • 10x SATA3 (6Gbps) ports | SAS | • 8x SAS2 (6Gbps) ports | LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
---|---|
USB | • 2x USB 3.0 ports |
VGA | • 1x VGA port |
Management
| Software | • SuperDoctor® 5 • Watch Dog • NMI • IPMI 2.0 • SUM and SSM |
---|---|
Power Configuration |
• ACPI / APM Power Management • Power-on mode for AC power recovery |
Chassis
| |
---|---|
Form Factor | • 4U Rackmount |
Model | • CSE-F418BC-R1K62BP |
Dimension and Weight
| |
---|---|
Width | • 17.63" (448mm) |
Height | • 6.96" (177mm) |
Depth | • 29" (737mm) |
Gross Weight | • 200 lbs (90.71 kg) |
Available Colors | • Black |
Front Panel
| |
---|---|
Buttons |
• Power On/Off button |
LEDs | •
Power status LED • Hard drive activity LED • 2x Network activity LEDs • Information LED (UID, Fan failure, Overheat) |
Expansion Slots (per node)
| |
---|---|
PCI-Express |
• 1x PCI-E 3.0 x16 Low-profile |
Drive Bays (per node)
| |
---|---|
Hot-swap |
• 6x 2.5" Hot-swap SAS2/SATA3 HDD trays |
Backplane
| |
---|---|
• 1x SAS/SATA backplane |
System Cooling (per node)
| |
---|---|
Fans |
• 3x 4cm 14k RPM middle fans |
Power Supply
| |
---|---|
1620W high-efficiency redundant power supply w/ PMBus | |
AC Input | • 1000W Output @ 100-120V, 12-10A, 50-60Hz • 1200W Output @ 120-140V, 12-10A, 50-60Hz • 1620W Output @ 180-240V, 10.5-8A, 50-60Hz |
DC Output |
• 1000W: +12V/84A; +5Vsb/4A • 1200W: +12V/100A; +5Vsb/4A • 1620W: +12V/150A; +5Vsb/4A |
Certification | • Platinum Certified |
Operating Environment
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. |
• Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |