Supermicro 4U Rackmount SuperServer SYS-7047R-3RF4+

Call for price
In stock
SKU
SYS-7047R-3RF4+

Key Features:
• 4U Tower / Rackmountable
• Dual socket R (LGA 2011) supports Intel® Xeon® processor
• Up to 1.5TB ECC DDR3; 24x DIMM slots
• 4x SATA2, 2x SATA3, 8x SAS ports
• 8x 3.5" Hot-swap SAS/SATA HDD Bays
• 920W Redundant Power Supplies Platinum Level (94%)

Supermicro SuperServer SYS-7047R-3RF4+

Product SKU
• SuperServer 7047R-3RF4+ (Black)
Motherboard
  • Super X9DR3-LN4F+
Processor/Cache
CPU • Dual Socket R (LGA 2011)
• Intel® Xeon® processor E5-2600 and E5-2600 v2 family 
Cache • Up to 30MB
System Bus • QPI up to 8 GT/s
Note   BIOS version 3.0 or above is required
System Memory
Memory Capacity • 24x 240-pin DDR3 DIMM slots
• Up to 1.5TB DDR3 ECC LRDIMM
• Up to 768GB DDR3 ECC Registered memory (RDIMM)
• Up to 192GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type

• 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

• 32GB, 16GB, 8GB, 4GB, 2GB, 1GB

Memory Voltage

• 1.5 V, 1.35 V

Error Detection

• Corrects single-bit errors
• Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset • Intel® C606 Chipset
SATA • SATA 2.0 3Gbps with RAID 0, 1, 5, 10
• SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SAS • SAS from C606
• RAID 0, 1, 10 support
IPMI

• Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond BMC

Network Controllers

• Intel® i350 Gigabit Ethernet Controller
• Virtual Machine Device Queues reduce I/O overhead
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• 1x Realtek RTL8201N PHY (dedicated IPMI)

Video

• G200 (Nuvoton WPCM450 BMC with graphic controller)

Super I/O

• Nuvoton W83527

Input/Output
SATA • 2x SATA 3.0 ports (6Gbps)
• 4x SATA 2.0 ports (3Gbps)
SAS • 8x SAS ports via C606
LAN • 4x RJ45 Gigabit Ethernet LAN ports
• 1x RJ45 Dedicated IPMI LAN port
USB • 2x Front USB 2.0 + 4x Rear USB 2.0 ports
• MB: 4x rear + 4x via header + 1x Type A
Video • 1x VGA port
Serial Port/Header • 1x Fast UART 16550 ports
Expansion Slots
PCI-Express • 4x PCI-E 3.0 x16 (Full-height, Full-length)
• 1x PCI-E 3.0 x8 (Full-height, Full-length)
• 1x PCI-E 3.0 x4 (in x8) (Full-height, Full-length)
System BIOS
BIOS Type • 128Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features • Plug and Play (PnP)
• APM 1.2
• DMI 2.2
• ACPI 1.0 / 2.0
• USB Keyboard support
• SMBIOS 2.3
• UEFI
Chassis
Form Factor • 4U Rackmountable / Tower
• Optional Rackmount Kit
Model CSE-745TQ-R920B
Dimension and Weight
Height • 17.2" (437mm)
Width • 7" (178mm)
Depth • 25.5" (648mm)
Gross Weight • 73.5 lbs (33.6 kg)
Available Colors • Black
Front Panel
Buttons

• Power On/Off button
• System Reset button

LEDs • Power LED
• Hard drive activity LED
• 2x Network activity LEDs
• System Overheat LED
• Power Fail LED
Ports

• 2x USB Ports

Drive Bays
Hot-swap

• 8x 3.5" Hot-swap SAS/SATA Drive Trays

Peripheral Bay(s)
[90o Rotatable]
• 2x 5.25" Peripheral Drive Bays
• 1x 5.25" Bay that fits 3.5" bay devices
SAS / SATA Backplane
 

• SAS / SATA Hard Drive Backplane w/AMI MG9072

System Cooling
Fans

• 3x 5000 RPM Hot-swap PWM Cooling Fans
• 2x 5000 RPM Hot-swap Rear Exhaust PWM Fans

Power Supply with Power Distributor
  920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input • PMBus and I2C AC Input ##100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output
• 4 Amp @ +5V standby
• 75 Amp @ +12V
Certification • Platinum Certified
PC Health Monitoring
CPU

• Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages
• 6-Phase-switching voltage regulator

FAN

• Total of eight fan headers supporting up to 8 fans
• 8x fans with tachometer status monitoring
• Status monitor for speed control
• Pulse Width Modulated (PWM) fan connectors

Temperature

• Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 8x fan connectors
• Thermal Monitor 2 (TM2) support
• PECI

LED

• System info. LED: UID indicator, fan fail/System Overheat
• Suspend static indicator LED
• UID/Remote LED

Other Features

• Chassis intrusion detection
• Chassis intrusion header

Operating Environment / Compliance
RoHS

• RoHS Compliant

Environmental Spec.





• Operating Temperature: 10°C ~ 35°C (50°F ~ 95°F)
• Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
• Operating Relative Humidity: 8% to 90% (non-condensing)
• Non-operating Relative Humidity: 5% to 95% (non-condensing)


Copyright © 2014-present Will Jaya Inc. All rights reserved.