Supermicro 4U Rackmount SuperServer SYS-4048B-TRFT

Call for price

In stock

SKU

SYS-4048B-TRFT

Key Features:
• Quad socket R1 (LGA 2011) supports Intel® Xeon® processor
• Up to 6TB DDR3 1600MHz ECC RDIMMs and LRDIMMs; 96x DIMM slots
• Up to 11x PCI-E 3.0 slots (4 x16, 7 x8)
• I/O ports via Add-on Card: 2x 10Gb LAN, 1x Dedicated LAN for IPMI Remote Management, 1x VGA
• 24x 2.5" Hot-swap SAS3/SATA3 HDD or SSD (selected RAID/HBA cards); 48x 2.5" Hot-swap HDD/SSD optional
• 4x 9cm + 3x 8cm Heavy-duty Fans
• 1620W Redundant (N+1) Power Supplies, Platinum Level (94%)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Supermicro SuperServer 4048B-TRFT (Complete System Only)

Product SKU
SYS-4048B-TRFT	• SuperServer 4048B-TRFT (Black)

Motherboard
	• Super X10QBi

Processor/Cache
CPU	• Intel® Xeon® processor E7-8800 v4/v3, E7-4800 v4/v3 family (up to 24 Cores and 165W TDP) • Quad Socket R1 (LGA 2011)
Cache	• Up to 60 MB
System Bus	• QPI up to 9.6 GT/s
Notes	• E7-8800/4800 v2 (using MB-X10QBI-MEM1 Rev 1.01 or above) • E7-8800/4800 v4/v3 (using MB-X10QBI-MEM1 Rev 2.0 or above)

System Memory
Memory Capacity	• 96x 240-pin DDR3 DIMM slots • Supports up to 6TB DDR3 ECC Registered memory (RDIMM) and LRDIMM in 96 DIMM slots
Memory Type	• 1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	• 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage	• 1.5 V, 1.35 V
Error Detection	• Corrects single-bit errors • Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	• Intel® C602J chipset
AHCI SATA	• SATA3 (6Gbps) with RAID 0, 1 • SATA2 (3Gbps) with RAID 0, 1, 5, 10
Network Controllers (via AOM)	• Intel® X540 Dual Port 10GBase-T • Virtual Machine Device Queues reduce I/O overhead • Supports 10GBase-T , 100BASE-TX, and 1000BASE-T, RJ45 output • 1x Realtek RTL8201N PHY (dedicated IPMI)
IPMI (via AOM)	• Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED 2400
Graphics	• ASPEED 2400

Input/Output
AHCI SATA	• 2x SATA3 (6Gbps) ports • 4x SATA2 (3Gbps) ports
LAN	• 2x RJ45 10GBase-T ports on AOM • 1x dedicated LAN port for IPMI on AOM
USB	• 2x USB 2.0 ports
Serial Port/Header	• 2x Fast UART 16550 ports: 1 rear and 1 header
DOM	• 1 DOM (Disk on Module) power connector

System BIOS
BIOS Type	• 16MB SPI Flash EEPROM with AMI® BIOS
BIOS Features	• Plug and Play (PnP) • PCI 2.2 • ACPI up to 3.0 • USB Keyboard support

Chassis
Form Factor	• 4U Rackmountable • Rackmount Kit: Comes with the system
Model	• CSE-418XA-R3240B

Dimension and Weight
Height	• 7.0" (178mm)
Width	• 17.2" (437mm)
Depth	• 31.3" (795mm)
Gross Weight	• 115 lbs (52.16 kg)
Available Colors	• Black

Drive Bays
Hot-swap	• 24x 2.5" Hard drive bays (default)* • 48x 2.5" Hard drive bays (optional) * BPN-SAS3-216A direct attached backplane, system supports up to 24 HDDs by using selected RAID/HBA card and default HDD connection is onboard C602J chipset 2 SATA3 + 4 SATA2

Drive Bays

Hot-swap

• 24x 2.5" Hard drive bays (default)*
• 48x 2.5" Hard drive bays (optional)

* BPN-SAS3-216A direct attached backplane, system supports up to 24 HDDs by using selected RAID/HBA card and default HDD connection is onboard C602J chipset 2 SATA3 + 4 SATA2

Expansion Slots
PCI-Express	• 11x PCI-E 3.0 slots w/ 48 memory slots (4x PCI-E 3.0 x16 and 7x PCI-E 3.0 x8) • 8x PCI-E 3.0 slots w/ 96 memory slots (4x PCI-E 3.0 x16 and 4x PCI-E 3.0 x8)

Backplane
	• SAS/SATA HDD Backplane

System Cooling
Fans	• 4x 92mm RPM Hot-Swappable Cooling Fans • 3x 80mm RPM Hot-Swappable Rear Exhaust Fan • 2x 80mm Rear Exhaust Fans (optional)
Shrouds	• 1x Air Shroud (MCP-310-41804-0B)

Power Supply
	1620W high-efficiency redundant power supply w/ PMBus
AC Input	• 1000W Output @ 100-120V, 12-10A, 50-60Hz • 1200W Output @ 120-140V, 12-10A, 50-60Hz • 1620W Output @ 180-240V, 10.5-8A, 50-60Hz
DC Output	• 1000W: +12V/84A; +5Vsb/4A • 1200W: +12V/100A; +5Vsb/4A • 1620W: +12V/150A; +5Vsb/4A
Certification	• Platinum Certified

PC Health Monitoring
CPU	• Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages • 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN	• 4-pin fan headers with tachometer status monitoring • Low noise fan speed control mode
Temperature	• Monitoring for CPU and system environment • Thermal Control for 9x fan connectors
Other Features	• Chassis intrusion detection

Operating Environment
RoHS	• RoHS Compliant
Environmental Spec.	• Operating Temperature: 10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing)