Supermicro 4U Rackmount SuperServer SYS-4028GR-TRT
Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor
• Up to 3TB ECC 3DS LRDIMM; 24x DIMM slots
• Dual 10GBase-T LAN with Intel® X540
• 24 Hot-swap 2.5" drive bays
• 8 Hot-swap 92mm cooling fans
• 1600W Redundant (2+2) Power Supplies; Platinum Level (94%+)
Product SKU
| |
---|---|
SYS-4028GR-TRT | • SuperServer 4028GR-TRT (Black) |
Motherboard
| |
---|---|
• Super X10DRG-OT+-CPU |
Processor/Cache
|
|
---|---|
CPU | • Intel® Xeon® processor E5-2600 v4 / v3 family (up to 160W TDP) • Dual Socket R3 (LGA 2011) |
Cores/Cache | • Up to 22 Cores / Up to 55MB Cache |
System Bus | • QPI up to 9.6 GT/s |
BIOS version 2.0 or above is required | |
Note | Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
GPU/Xeon Phi Support |
• NVIDIA® Tesla® K10/K40/K80/M40/M60/Xeon Phi |
System Memory
| |
---|---|
Memory Capacity | • 24x 288-pin DDR4 DIMM slots • Up to 3TB ECC 3DS LRDIMM, 1.5TB ECC RDIMM |
Memory Type | • 2400 /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | • RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB |
Memory Voltage | • 1.2 V |
Error Detection |
• Corrects single-bit errors |
On-Board Devices
| Chipset | • Intel® C612 chipset |
---|---|
SATA | • SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2400 BMC |
Network Controllers | • Dual Port 10GbE |
Graphics |
• ASPEED AST2400 BMC |
Input/Output
| SATA | • 10 SATA3 (6Gbps) ports | LAN | • 2 RJ45 10GBase-T LAN ports • 1 RJ45 Dedicated IPMI LAN port |
USB | • 4 USB 3.0 ports |
---|---|
Video | • 1 VGA Connector |
Serial Port | • 1 Serial header |
System BIOS
| BIOS Type | • 128Mb SPI Flash EEPROM with AMI® BIOS | BIOS Features | • Plug and Play (PnP) • APM 1.2 • DMI 2.3 • PCI 2.3 • ACPI 1.0 / 2.0 / 3.0 • USB Keyboard support • SMBIOS 2.7.1 • UEFI |
---|
Chassis
| |
---|---|
Form Factor | • 4U Rackmountable • Rackmount Kit (MCP-290-00057-0N) |
Model | • CSE-418GTS-R3200B |
Dimension and Weight
| |
---|---|
Height | • 7.0" (178mm) |
Width | • 17.2" (437mm) |
Depth | • 29" (737mm) |
Gross Weight | • 100 lbs (45.3 kg) |
Available Colors | • Black |
Drive Bays
| |
---|---|
Hot-swap |
• 24 Hot-swap 2.5" hard drive bays |
Expansion Slots
| |
---|---|
PCI-Express |
• 8 PCI-E 3.0 x16 (double-width) slots |
Backplane
| |
---|---|
• SAS/SATA HDD Backplane |
System Cooling
| |
---|---|
Fans | • 8 Hot-swap 92mm cooling fans |
Shrouds |
• 1 Air Shroud (MCP-310-41808-0B) |
Power Supply
| |
---|---|
1600W 1U Redundant Power Supplies with PMBus | |
Total Output Power | • 1000W/1600W |
Dimension
(W x H x L) |
• 73.5 x 40 x 265 mm |
Input | • 100-127Vac / 12.9A Max / 50-60Hz • 200-240Vac / 9.5A Max / 50-60Hz |
+12V | • Max: 82A / Min: 0.1A (100-127Vac) • Max: 132A / Min: 0.1A (200-240Vac) |
12V SB | • Max: 2A / Min: 0.2A |
Output Type | • 25 Pairs Gold Finger Connector |
Certification | • Platinum Level |
PC Health Monitoring
| |
---|---|
CPU |
• Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages |
FAN | • 4-pin fan headers with tachometer status monitoring |
Temperature | • Monitoring for CPU and system environment |
Other Features | • Chassis intrusion detection |
Operating Environment
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. | • Operating Temperature:
10°C ~ 35°C (50°F ~ 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |