Supermicro 3U SuperServer SYS-5039MS-H8TRF

Call for price

In stock

SKU

SYS-5039MS-H8TRF

Key Features:
• Cloud Computing / Web Hosting
• Single socket H4 (LGA 1151) supports
   Intel® Xeon® processor E3-1200 v6/v5,
   Intel® 7th/6th Gen. Core„¢ i3 series,
   Intel® Celeron® and Intel® Pentium®
• 2x 3.5" SATA3 by default; 2x 2.5" SATA3 HDDs w/ Optional kits
• Up to 64GB ECC UDIMM DDR4-2400MHz in 4 sockets
• 2 GbE LAN ports via Intel i350, 1 dedicated IPMI LAN port
• 1 PCI-E 3.0 x8 and 1 Micro-LP
• 2 USB 2.0, 1 VGA, 1 COM port, (with KVM dongle)
• 1 USB 3.0 (Type A), 1 SATA DOM
• 4 heavy duty hot-swap 8cm fans with optimal cooling zone (per system)
• 1600W Redundant power supplies Titanium Level Certified (per system)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Supermicro SuperServer SYS-5039MS-H8TRF

Product SKU
SuperServer	SYS-5039MS-H8TRF (Black)

Motherboard
	Super X11SSD-F

Processor/Cache
CPU	Single Socket H4 (LGA 1151) supports: Intel® Xeon® processor E3-1200 v6/v5, Intel® 7th/6th Gen Core„¢ i3, Intel® Pentium®, Intel® Celeron® processors CPU TDP up to 80W
Note	BIOS version 2.0 or above is required to support Intel® Xeon® Processor E3-1200 v6 series or 7th Generation Intel® Core„¢ Processors

System Memory (per node)
Memory Capacity	4x 288-pin DDR4 DIMM slots Supports up to 64 GB DDR4 ECC Un-Buffered memory (UDIMM)
Memory Type	2400MHz/2133MHz ECC DDR4 SDRAM 72-bit, 288-pin gold-plated UDIMMs
DIMM Sizes	16GB, 8GB, 4GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

Expansion Slots (per node)
PCI-Express	1 PCI-E 3.0 x8 Low-profile slot 1 Micro-LP for Dual GbE (pre-installed); 10GbE or IB AOC optional

Network Devices (per node)
Micro-LP NIC	Intel® i350 GbE controller Dual RJ-45 connectors Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/O Acceleration Technology (I/O AT) MicroLP Adapter Matrix (Networking options)

On-Board Devices (per node)
Chipset	Intel® C236 chipset
SATA	SATA3 (6Gbps) via C236 controller
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM over LAN support ASPEED AST2400 BMC
Headers	1x Type A USB 3.0
Graphics	ASPEED AST2400 Graphics (BMC with Graphic controller)

Input/Output (per node)
SATA	2 SATA3 (6Gbps) ports
LAN	2 RJ45 Gigabit Ethernet LAN ports 1 RJ45 Dedicated IPMI LAN port
DOM	SATA DOM (Disk on Module) power connector support
KVM	1 VGA, 1 COM and 2 USB 2.0 (with KVM dongle)

System BIOS
BIOS Type	128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features	DMI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3

Rear Windows (each node)
Switch	Power / UID

Chassis
Form Factor	3U
Model	CSE-938BH-R1K68B

Dimension & Weight
Height	5.21" (132.5 mm)
Width	17.26" (438.4 mm)
Depth	23.2" (589 mm)
Gross Weight	88 lbs (39.92 kg)
Available Colors	Black

Front Panel
Button	Power On/Off button
LEDs	Power LED Node status LED

Drive Bays (per node)
Internal	2 Hot-swap 3.5" SATA3 (6Gbps) HDDs per node (or 2x 2.5" SATA3 with optional kits); up to 16 HDDs total Enterprise SATA HDD only recommended

System Cooling
Fans	4 Heavy duty 8cm fans with optimal cooling zone

Power Supply (76mm Width)
	1600W 1U Redundant Power Supplies with PMBus
CPU	Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. 3-Phase-switching voltage regulator with auto-sense from 0.5V-2.3V
FAN	Cooling zone
Temperature	Monitoring for CPU and chassis environment

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)