Supermicro 3U Rackmount Server SYS-6036T-TF

Call for price
In stock
SKU
SYS-6036T-TF
Key Features:
• Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
• Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM /
  48GB Unbuffered DIMM
• 4 (x8) PCI-E 2.0, 1 (x4) PCI-E 2.0 and 1 (x4) PCI-E slot
• Dual Intel® 82574L Gigabit Ethernet
• 8x 3.5" Hot-swap Drives Trays 6 x SATA Hard Drives Supported
• 650W High Efficiency Power Supply
• Integrated IPMI 2.0 with KVM and Dedicated LAN
SuperServer SYS-6036T-TF 3U Rackmount

Supermicro SYS-6036T-TF 3U Rackmount Barebone with 650W High Efficiency Power Supply,Intel® 5520 (Tylersburg) chipset, 8x Hot-swap Drive Bays using Supermicro Super X8DTE-F
motherboard and CSE-833TQ-650B Chassis.

Product SKU
SuperServer 6036T-TF (Black)
Motherboard
        Super X8DTE-F
Processor/Cache
CPU

Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel® Xeon®Processor 5600 Series (Westmere)
Intel® Xeon®Processor 5500 Series (Nehalem-EP)

QPI up to 6.4 GT/s
System Memory
Memory Capacity 12x 240-pin DIMM slots
Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage 1.5 V / 1.35V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset Intel® 5520 (Tylersburg) chipset
ICH10R + IOH-36D
SATA

Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)

IPMI

Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC

Network Controllers

2x Intel® 82574L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

Matrox G200eW 16 MB DDR2

Super I/O Winbond 83827HF chip
Expansion Slot
PCI-Express 4 (x8) PCI-E 2.0 slots
1 (x4) PCI-E 2.0 slot
1 (x4) PCI-E slot
Input/Output
Serial ATA Six Serial ATA ports
Six SATA hard drives supported
Floppy 1 Floppy controller; 1.44 MB
LAN 2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 4x USB rear ports
2x USB on-board (TypeA)
4x USB internal headers
Total 8 USB 2.0 Compliant
VGA

1x VGA port

Keyboard / Mouse

PS/2 keyboard and mouse ports

Serial Port / Header 1 Fast UART 16550 serial port
1 Fast UART 16550 serial header (Option)
System Bios
Bios Type 32Mb SPI Flash EEPROM with AMI® BIOS
Bios Features

Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support

Chassis
Form Factor 3U Rackmount
Model CSE-833TQ-650B
Dimension and Weight
Height 7.0" (178mm)
Width 17.2" (437mm)
Depth 25.5" (648mm)
Weight 71 lbs
Available Color Black
Front Panel
Buttons Power On/Off button
System Reset button
LED Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Power fail LED
Port 2x USB Ports
Drive Bays
Hot-swap 8x 3.5" SAS / SATA Hot-swap drive trays SAS or enterprise SATA HDD only recommended
Supports up to 6x SATA Hard Drives
Peripheral Bay(s) 2x 5.25" Peripheral Drive Bay
1x 3.5" Bay
SAS / SATA Backplane
  SAS / SATA Backplane w/ Enclosure Management
System Cooling
Fans 4x 5000 RPM Hot-Swappable Cooling Fans
2x 5000 RPM Hot-Swappable Rear Exhaust Fan
Shroud 1x Air Shroud
Power Supply
  650W AC-DC high-efficiency power supply w/ PFC Redundant Cooling
AC Voltage 100 - 240V, 60-50Hz, 8.3 - 3.5 Amp
+5V 30 Amp
+5V standby 4 Amp
+12V 54 Amp
-12V 0.5 Amp
+3.3V 25 Amp
Certification Certified
PC Health Monitoring
CPU Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN Total of eight fan headers supporting up to 8 fans
Eight 4-pin fan headers
8x fans with tachometer status monitoring
Support 3-pin fans (w/o speed control)
Low noise fan speed control
Temperature Monitoring for CPU and chassis environment
Thermal Control for 8x fan connectors
PECI
Other Feature

Chassis intrusion detection
Chassis intrusion header

Operating Environment / Compliance
RoHS

RoHS Compliant

Environmental Spec.

Operating Temperature: 10°to 35°C (50°to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)

 

 

Copyright © 2014-present Will Jaya Inc. All rights reserved.