Supermicro 3U MicroCloud SuperServer SYS-5038MR-H8TRF
Key Features:
• Supports Intel® Xeon® processor
• Up to 512GB of memory
• 2x 3.5" Hot-swap SATA3/SAS drive bays
• 2x GbE LAN ports via Intel® i350
• 4x 8cm heavy duty hot-swap fans
• 1620W Redundantpower supplies Platinum (per system)
Product SKU
| |
---|---|
SuperServer | • SYS-5038MR-H8TRF (Black) |
Motherboard
| |
---|---|
• Super X10SRD-F |
Processor/Cache
|
|
---|---|
CPU | • Intel® Xeon® processor E5-2600 v4€ / v3, E5-1600 v4€ */ v3* family (up to 145W TDP) • Single Socket R3 (LGA 2011) |
Cores/Cache | • Up to 22 Cores€ / Up to 55MB€ Cache |
Note | • € BIOS version 2.0 or above is required |
* Ambient temperature should be no higher than 25°C |
System Memory
|
|
---|---|
Memory Capacity | • 4x 288-pin DDR4 DIMM slots • Up to 512GB ECC 3DS LRDIMM • Up to 256GB ECC LRDIMM • Up to 128GB ECC RDIMM |
Memory Type | • 2400€ / 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
DIMM Sizes | • 3DS LRDIMM: 128GB |
Memory Voltage | • 1.2 V |
Error Detection | • Corrects single-bit errors |
On-Board Devices (per node)
|
Chipset | • Intel® C612 chipset |
---|---|
SATA | • 1x SATA DOM • SATA 3.0 (6Gbps) with RAID 0, 1 |
IPMI | • Support for Intelligent Platform Management Interface v.2.0 |
Headers | • 1x USB Type A 3.0, TPM ready |
Graphics | • Aspeed AST2400 BMC |
Network Devices (per node)
|
MicroLP NIC | • Intel® i350, 2x Gigabit LAN ports • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output • Intel® I/OAT 3 support for fast, scaleable, and reliable networking • VMDq support for better performance of virtualization • MicroLP Adapter Matrix (Networking options) |
---|
Input/Output (per node)
|
Serial SATA | • 2x SATA 3.0 ports (6Gbps) | LAN | • 2x RJ45 Gigabit Ethernet LAN ports • 1x RJ45 Dedicated IPMI LAN port |
---|---|
KVM | • 1x VGA, 1x COM, and 2x USB 2.0 (with KVM dongle) ports |
System BIOS
| |
---|---|
BIOS Type | • 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features |
• Plug and Play (PnP) |
Rear Window (each node)
| |
---|---|
Switch | • Power / UID |
Chassis
| |
---|---|
Form Factor | • 3U |
Model | • CSE-938BH-R1620B |
Dimension and Weight
| |
---|---|
Height | • 5.21" (132.5 mm) |
Width | • 17.26" (438.4 mm) |
Depth | • 23.2" (589 mm) |
Gross Weight | • 88 lbs (39.92 kg) |
Available Colors | • Black |
Front Panel
| |
---|---|
Buttons | • Power On/Off button |
LEDs |
• Power LED |
Expansion Slots (per node)
| |
---|---|
PCI-Express | • 1 (x8) PCI-E 3.0 Low-profile slot |
Drive Bays (per node)
| |
---|---|
Hot-swap | • 2x 3.5" hot-swap SATA3 (6Gbps) HDDs per node (or 2x 2.5" SATA3 with optional kits); up to 16 HDDs total |
System Cooling
| |
---|---|
Fans | • 4x 8cm 11K RPM, 4-pin PWM cooling fans |
Power Supply
| |
---|---|
1620W high-efficiency redundant power supply w/ PMBus | |
AC Input | • 1000W Output @ 100-120V, 12-10A, 50-60Hz • 1200W Output @ 120-140V, 12-10A, 50-60Hz • 1620W Output @ 180-240V, 10.5-8A, 50-60Hz |
DC Output |
• 1000W: +12V/84A; +5Vsb/4A • 1200W: +12V/100A; +5Vsb/4A • 1620W: +12V/150A; +5Vsb/4A |
Certification | • Platinum Certified |
PC Monitoring
| |
---|---|
CPU | • Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages. |
FAN | • Cooling zone |
Temperature | • Monitoring for CPU and chassis environment |
Operating Environment/Compliance
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. |
• Operating Temperature:
10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |