Supermicro 2U TwinPro Rackmount SuperServer SYS-2028TP-DECTR
Key Features:
Two hot-pluggable systems (nodes) in a 1U form factor. Each node supports the following:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4€ / v3
family; QPI up to 9.6GT/s
• Up to 2TB€ ECC 3DS LRDIMM , up to DDR4- 2400€ MHz ; 16x DIMM slots
• 1x PCI-E 3.0 x16, 1x PCI-E 3.0 x8 slot, and 1x "0 Slot" card
• Intel® X540 Dual port 10GBase-T LAN
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• 12x 2.5" Hot-swap drive bays (support up to 12x SAS3 in IT mode)
• SAS3 via LSI 3008 controller and Expander
• 1280W Redundant Power Supplies Platinum Level Digital (94%)
in IT mode) per node using Supermicro Super X10DRT-PT Serverboard and CSE-217HD+-R1K28B Chassis.
|
Product SKU
| |
|---|---|
| SYS-2028TP-DECTR | • SuperServer 2028TP-DECTR (Black) |
|
Motherboard
| |
|---|---|
| Super X10DRT-PT | |
|
Processor/Cache (per node)
| |
|---|---|
| CPU | • Dual Socket R3 (LGA 2011) • Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) * |
| Cores/Cache | • Up to 22 Cores€ / Up to 55MB€ Cache |
| System Bus | • QPI up to 9.6 GT/s |
| Note | • † BIOS version 2.0 or above is required |
|
* Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
|
System Memory (per node)
| |
|---|---|
| Memory Capacity | • 16x 288-pin DDR4 DIMM slots • Up to 2TB€ ECC 3DS LRDIMM, 512GB ECC RDIMM |
| Memory Type |
• 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | • RDIMM: 32GB, 16GB, 8GB, 4GB • LRDIMM: 64GB, 32GB • 3DS LRDIMM: 128GB |
| Memory Voltage | • 1.2 V |
| Error Detection | • Corrects single-bit errors |
|
On-Board Devices
| |
|---|---|
| Chipset | • Intel® C612 chipset |
| SAS | • LSI 3008 SAS3 (12Gbps) via SAS3 Expander |
| IPMI |
• Support for Intelligent Platform Management Interface v.2.0 |
| Network Controllers |
• Intel® X540 Dual port 10GBase-T |
| Graphics | • ASPEED AST2400 BMC |
|
Input/Output (per node)
| |
|---|---|
| SAS | • 12x SAS3 (12Gbps) ports |
| LAN | • 2x RJ45 10GBase-T ports |
| USB |
• 2x USB 3.0 ports total (2x rear) |
| VGA | • 1x VGA port |
| Serial Port / Header |
• 1x Fast UART 16550 port / 1 Header (internal) |
| Others | • 1x mSATA (full size) and one SATADOM support on the daughter card
|
|
Chassis
| |
|---|---|
| Form Factor | • 2U Rackmount |
| Model | • CSE-217HD+-R1K28B |
|
Dimension and Weight
| |
|---|---|
| Height | • 3.47" (88mm) |
| Width | • 17.25" (438mm) |
| Depth | • 28.75" (730mm) |
| Gross Weight | • 85 lbs (38.6kg) |
| Available Color | • Black |
|
Front Panel
| |
|---|---|
| Buttons |
• Power On/Off button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
|
Expansion Slots (per node)
| |
|---|---|
| PCI-E |
• 1x PCI-E 3.0 x16 Low-profile slot (Both CPUs need to be installed for full access to PCI-E slots) |
|
Drive Bays (per node)
| |
|---|---|
| Hot-swap |
• 12x 2.5" Hot-swap HDD Bays |
|
System Cooling
| |
|---|---|
| Fans |
• 4x 8cm heavy duty PWM fans with optimal fan speed control |
|
Power Supply (76mm width)
| |
|---|---|
| 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | |
| AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
| DC Output | • 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
| Certification | • Platinum Certified |
|
System Bios
| |
|---|---|
| Bios Type |
• 128Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
|
Operating Environment / Compliance
| |
|---|---|
| RoHS | • RoHS Compliant |
| Environmental Spec. |
• Operating Temperature: 10°C to 35°C (50°F to 95°F) |