Supermicro 2U TwinPro Multinode SYS-2027PR-DTFR
Key Features:
Two hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
• Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and
E5-2600 v2 family€
• Up to 1TB ECC LRDIMM, 512GB ECC RDIMM, up to 1866MHz; 16x
DIMM sockets
• 1x PCI-E 3.0 x16 Low-profile slot;
1x PCI-E 3.0 x8 Low-profile slot
• Intel® i350 Dual port GbE LAN
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Single port IB (FDR, 56 Gbps), w/ QSFP connector
• 8x Hot-swap 2.5" SATA HDD Bays
• 1280W Redundant Power Supplies Platinum Level (94%)
Supermicro Super X9DRT-PIBF Server motherboard and CSE-217HD+-R1K28B 2U Rackmount Chassis.
|
Product SKU
| |
|---|---|
| SYS-2027PR-DTFR | • SuperServer 2027PR-DTFR (Black) |
|
Motherboard
| |
|---|---|
| Super X9DRT-PIBF | |
|
Processor/Cache (per node)
| |
|---|---|
| CPU | • Dual Socket R (LGA 2011) • Intel® Xeon® processor E5-2600 and E5-2600 v2 family€ (up to 135W TDP *) |
| Cache | • Up to 30MB |
| System Bus | • QPI up to 8 GT/s |
| Note | • † BIOS version 3.0 or above is required |
|
* Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
|
System Memory (per node)
| |
|---|---|
| Memory Capacity | • 16x 240-pin DDR3 DIMM slots • Supports up to 1TB DDR3 ECC LRDIMM • Supports up to 512GB DDR3 ECC Registered memory (RDIMM) |
| Memory Type |
• 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | • 1.5 V and 1.35 V |
| Error Detection | • Corrects single-bit errors • Detects double-bit errors (using ECC memory) |
|
On-Board Devices
| |
|---|---|
| Chipset | • Intel® C602 chipset |
| Infiniband | • Mellanox ConnectX-3 FDR Infiniband 56Gb/s Controller |
| SATA | • SATA3 (6Gbps) w/ RAID 0, 1, 10 • SATA2 (3Gbps) w/ RAID 0, 1, 10 |
| IPMI |
• Support for Intelligent Platform Management Interface v.2.0 |
| Network Controllers |
• Intel® i350 Dual Port Gigabit Ethernet |
| Graphics | • Matrox G200eW |
|
Input/Output (per node)
| |
|---|---|
| ACHI SATA | • 2x SATA3 (6Gbps) ports |
| SCU SATA | • 2x SATA2 (3Gbps) ports |
| LAN | • 2x RJ45 10GBase-T ports |
| Infiniband | • 1 external QSFP Infiniband connector |
| USB |
• 2x USB 2.0 ports total (2x rear) |
| VGA | • 1x VGA port |
| Serial Port / Header |
• 1x Fast UART 16550 port / 1 Header (internal) |
| Others | • 1x mSATA (full size) and one SATADOM support on the daughter card |
|
Chassis
| |
|---|---|
| Form Factor | • 2U Rackmount |
| Model | • CSE-217HD+-R1K28B |
|
Dimension and Weight
| |
|---|---|
| Height | • 3.47" (88mm) |
| Width | • 17.25" (438mm) |
| Depth | • 28.75" (730mm) |
| Gross Weight | • 66 lbs (29.9kg) |
| Available Color | • Black |
|
Front Panel
| |
|---|---|
| Buttons |
• Power On/Off button |
| LEDs | • Power status LED • HDD activity LED • 2x Network activity LEDs • Universal Information (UID) LED |
|
Expansion Slots (per node)
| |
|---|---|
| PCI-E |
• 1x PCI-E 3.0 (x16) Low-profile slot |
|
Drive Bays (per node)
| |
|---|---|
| Hot-swap |
• 8x 2.5" Hot-swap SATA HDD trays |
|
System Cooling
| |
|---|---|
| Fans |
• 4x 8cm heavy duty PWM fans with optimal fan speed control |
|
Power Supply
| |
|---|---|
| 1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | |
| AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
| DC Output | • 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
| Certification | • Platinum Certified |
|
System Bios
| |
|---|---|
| Bios Type |
• 128Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features | • Plug and Play (PnP) • APM 1.2 • PCI 2.2 • ACPI 1.0 / 2.0 • USB Keyboard support • SMBIOS 2.3 • UEFI |
|
Operating Environment / Compliance
| |
|---|---|
| RoHS | • RoHS Compliant |
| Environmental Spec. |
• Operating Temperature: 10°C to 35°C (50°F to 95°F)
|