Supermicro 2U Twin2 Rackmount A+ AMD Opteron Server AS-2022TC-HTRF4
Key Features:
• Four hot-pluggable systems (nodes) in a 2U form factor
• Dual AMD Opteron„¢ 4000 series processors
• Chipset: AMD SR5670 / SP5100
• Up to 192GB of memory
• 3x Hot-swappable SATA Hard Drive Bays
• 1620W High-efficiency Platinum Level Redundant Power Supply
Product SKU
| |
---|---|
AS-2022TC-HTRF4 | • A+ 2U Twin2Server 2022TC-HTRF4 (Black) |
Motherboard
| |
---|---|
• Super H8DCT-HLN4F |
Processor/Chipset
|
|
---|---|
CPU | • Dual 1207-pin Socket C32 • Supports two 8/6/4-Core ready AMD Opteron„¢ 4000 Series processors • HT3.0 Link support |
Chipset | • AMD SR5670 + SP5100 Chipset |
Note | Supports 4000 series processors with Max ACP 75W (TDP 95W) |
System Memory (per node)
| |
---|---|
Memory Capacity | • 12 DIMM sockets • Support up to 192GB DDR3 1600MHz ECC Registered memory • Dual channel memory bus • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
Memory Type | • DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 16GB, 8GB, 4GB, 2GB, 1GB |
Memory Voltage | • 1.35V or 1.5V |
On-Board Devices (per node)
| SATA | • AMD SP5100 (RAID 0, 1) | IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM over LAN support • Winbond® WPCM450 BMC |
---|---|
Network Controllers | • Intel I350-AM4 Quad port Gigabit Ethernet • 10/100/1000BASE-T support |
VGA | • Matrox G200eW 16MB DDR2 |
Super I/O |
• Winbond® W83527 chip |
Expansion Slots (per node)
| PCI-E | • 1x PCI-E 2.0 x16 |
---|
Input/Output (per node)
| SATA | • 3x SATA2.0 (3Gb/s) Ports | LAN | • 4 RJ45 LAN ports • 1 RJ45 Dedicated LAN supports IPMI |
---|---|
USB | • 4x USB 2.0 ports • 2x Rear (via dongle), 1x header |
VGA | • 1x VGA port (via dongle) |
Serial Ports | • 1x Fast UART 16550 serial port (via dongle) |
System BIOS (per node)
| |
---|---|
BIOS Type | • 16Mb SPI Flash ROM with AMI® BIOS |
BIOS Features |
• Plug and Play (PnP) |
Chassis
| |
---|---|
Form Factor | • 2U Twin2 Rackmount |
Model | • CSE-827H-R1620BP |
Dimension and Weight (stand alone chassis / package)
| |
---|---|
Height | • 3.47" (88mm) / 11.22" (285mm) |
Width | • 17.25" (438mm) / 26.38" (670mm) |
Depth | • 28.5" (724mm) / 39.76" (1010mm) |
Gross Weight | • 85 lbs / 38.6 kg |
Available Colors | • Black |
Front Panel
| |
---|---|
Buttons | • 4x Power On/Off button |
LEDs |
• 4x Power status LED |
Drive Bays
| |
---|---|
Hot-swap | • 3x 3.5" Hot-swappable SATA Hard Drive Bays (per node) |
System Cooling
| |
---|---|
Fans | • 4x PWM fans w/ Optimal Fan Speed Control |
Power Supply
| |
---|---|
1620W high-efficiency redundant power supply w/ PMBus | |
AC Input | • 1000W Output @ 100-120V, 12-10A, 50-60Hz • 1200W Output @ 120-140V, 12-10A, 50-60Hz • 1620W Output @ 180-240V, 10.5-8A, 50-60Hz |
DC Output |
• 1000W: +12V/84A; +5Vsb/4A • 1200W: +12V/100A; +5Vsb/4A • 1620W: +12V/150A; +5Vsb/4A |
Certification | • 80Plus Platinum Certified |
PC Health Monitoring
| |
---|---|
CPU | • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset |
FAN | • Up to 4-fan status tachometer monitoring • Up to four 4-pin fan headers • Status monitor for speed control • 3-pin fan support (w/o speed control) • Low noise fan speed control (4-pin fan only) • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • CPU Thermal Trip Support • Thermal control for 8x Fan connectors • I2C Temperature Sensing Logic |
LED | • CPU / System Overheat LED • +5V Standby Alert LED |
Operating Environment / Compliance
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. | • Operating Temperature:
10°C to 30°C (50°F to 86°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |