Supermicro 2U Twin2 MultiNode Server SYS-5026Ti-HTRF
Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:
• Intel® Xeon® X3400 / L3400 series, Core„¢ i3 & Pentium®
processors with LGA 1156 socket
• Up to 32GB DDR3 1333/1066/800MHz ECC Registered DIMM
or 16GB Unbuffered DIMM
• 1 (x16) PCI-E 2.0 (Low Profile AOC)
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• High performance Intel® 82576BE dual port Gigabit LAN
• 3x 3.5" Hot-swap SATA2 Drive Bays (12 drives total)
• 920W Platinum Level 94% efficiency Redundant (1+1) power supplies
using Supermicro 4x Super X8SIT-HF motherboard and CSE-827H-R920B Chassis.
Product SKU |
|
|---|---|
| SYS-2016Ti-HTRF | SuperServer 2016Ti-HTRF (Black) |
Motherboard |
|
|---|---|
| 4x Super X8SIT-HF | |
Processor/Cache |
|
|---|---|
| CPU | LGA 1156 Socket |
System Memory |
|
|---|---|
| Memory Capacity |
6x 240-pin DDR3 DIMM sockets Supports up to 32 GB DDR3 ECC Registered memory (RDIMM) in 6 DIMM sockets Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) in 4 DIMM sockets 1333 / 1066 / 800 MHz Dual Core processors of Ci3 and Pentium: support ECC UDIMM only Note: Supports 1-Gb and 2-Gb x8 devices only - Intel 3420 / 3400 Chipset Memory Requirements |
| Note | All X3400 series and L3426 CPU support RDIMM and UDIMM All i3 series, L3406, G6950, and G1101 CPU support UDIMM only |
| Memory Type | 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB |
| Memory Voltage | 1.5 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices (per node) |
|
|---|---|
| Chipset | Intel® 3420 chipset |
| SATA | 6x SATA (3 Gbps) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 |
| Network Controllers | Dual Intel® 82576BE Gigabit Ethernet Controllers |
| VGA | Matrox G200eW 16MB DDR2 |
| Super I/O | Nuvoton W83627DHG UBE |
Input/Output (per node) |
|
|---|---|
| Serial ATA | Six Serial ATA ports 3 SATA hard drives supported |
| LAN | 2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2x USB rear ports 1x USB on-board 2x USB internal header (4 ports) Total 7 USB 2.0 Compliant |
| VGA | 1x VGA port |
| Serial Port / Header | 1 Fast UART 16550 serial port |
System Bios (per node) |
|
|---|---|
| Bios Type | 32Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features | Plug and Play (PnP)
|
Chassis |
|
|---|---|
| Form Factor | 2U Rackmount |
| Model | CSE-827H-R920B |
Dimension and Weight |
|
|---|---|
| Height | 3.47" (88mm) |
| Width | 17.25" (438mm) |
| Depth | 28.5" (724mm) |
| Weight | 85 lbs (38.6kg) |
| Available Color | Black |
Front Panel (per node) |
|
|---|---|
| Buttons |
Power On/Off button UID button |
| LED | Power LED (on power button) Network activity LED System Overheat/fan fail/power fail/ LED UID LED (on UID button) |
Expansionn Slot (per node) |
|
|---|---|
| PCI-Express | 1 (x16) PCI-E 2.0 (Low Profile AOC) |
Drive Bays (per node) |
|
|---|---|
| Hot-swap | 3x 3.5" SATA2 Hot-swap drive bays |
Hard Drive Backplane |
|
|---|---|
| 2U Hard drive Backplane | |
System Cooling |
|
|---|---|
| Fans | 4x 80mm PWM cooling fans |
Power Supply with Power Distributor |
|
|---|---|
| 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | 4 Amp @ +5V standby 75 Amp @ +12V |
| With Power Distributor |
+5V: 30 Amp |
| Cerification | Platinum Certified |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of four 4-pin PWM fans Five 4-pin fan headers 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED |
Operating Environment / Compliance |
|
|---|---|
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°to 35°C (50°to 95°F) |