Supermicro 2U Rackmount Ultra Server SYS-2028u-TN24R4T+ NVME

Call for price

In stock

SKU

SYS-2028U-TN24R4T+

Key Features:
• Up to 24x NVMe drives supported
• Flexible Connectivity Options
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600
v4€ / v3 family; QPI up to 9.6GT/s
• Up to 3TB€ ECC 3DS LRDIMM , up to DDR4- 2400€ MHz ; 24x DIMM slots
• 4x 10GBase-T ports
• 24x NVMe Hot-swap 2.5" drive bays (4 Hybrid ports - optional SAS3
supported via AOC); 2x rear SATA3 Hot-swap 2.5" drive bays
• 4x heavy duty fans w/ optimal fan speed control
• 1600W High efficiency (96%) Redundant PSU; Titanium Level

Due to the complexity of integration, this product is sold as completely assembled systems only (with minimum 2 CPU, 4 DIMM and 6 NVMe). Please contact your Will Jaya sales rep for special requirements.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-2028U-TN24R4T+ 2U Rackmount (Complete System Only)

Supermicro SYS-2028U-TN24R4T+ 2U Rackmount with Intel® C612 chipset, Total 26x Tool-less Hot-swap 2.5" drive bays, using Super X10DRU-i+ motherboard and
CSE-219AC24-R1K62P-N24T Rackmount Chassis

Product SKU
SYS-2028U-TN24R4T+	€¢ SuperServer 2028U-TN24R4T+ (Black)

Motherboard
	Super X10DRU-i+

Processor/Cache
CPU	€¢ Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 160W TDP) * €¢ Dual Socket R3 (LGA 2011)
Cores/Cache	€¢ Up to 22 Cores€ / Up to 55MB€ Cache
System Bus	€¢ QPI up to 9.6 GT/s
Note	€¢ € BIOS version 2.0 or above is required * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory
Memory Capacity	€¢ 24x 288-pin DDR4 DIMM slots €¢ Up to 3TB€ ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type	€¢ 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	€¢ RDIMM: 32GB, 16GB, 8GB, 4GB €¢ LRDIMM: 64GB, 32GB €¢ 3DS LRDIMM: 128GB
Memory Voltage	€¢ 1.2 V
Error Detection	€¢ Corrects single-bit errors

On-Board Devices
Chipset	€¢ Intel® C612 chipset
SATA	€¢ SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	€¢ Support for Intelligent Platform Management Interface v.2.0 €¢ IPMI 2.0 with virtual media over LAN and KVM-over-LAN support €¢ ASPEED AST2400 BMC
Network Controllers	€¢ 4x 10GBase-T ports via AOC-2UR6N4-i4XT €¢ Intel® X540 10GBase-T €¢ 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics	€¢ ASPEED AST2400 BMC

Input/Output
SATA	€¢ 6x SATA3 (6Gbps) ports (4x SATA3 via optional cable)
SAS	€¢ 4x SAS3 ports support via optional AOC
NVMe	€¢ 24x NVMe ports
LAN	€¢ 4x 10GBase-T LAN ports €¢ 1x RJ45 Dedicated IPMI LAN port
USB	€¢ 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video	€¢ 1x VGA Connector
Serial Ports / Header	€¢ 1x Serial header
DOM	€¢ 2x SuperDOM (Disk on Module) ports

System Bios
Bios Type	€¢ 128Mb SPI Flash EEPROM with AMI BIOS
Bios Features	€¢ Plug and Play (PnP) €¢ APM 1.2 €¢ PCI 2.3 €¢ ACPI 1.0 / 2.0 / 3.0 / 4.0 €¢ USB Keyboard support €¢ SMBIOS 2.7.1 €¢ UEFI 2.3.1

Management
Software	€¢ SuperDoctor® 5 €¢ Intel® Node Manager 3.0 €¢ Watch Dog €¢ NMI €¢ SUM and SSM €¢ Optional IPMI 1.5 / 2.0
Power Configuration	€¢ ACPI Power Management €¢ Power-on mode for AC power recovery

Chassis
Form Factor	€¢ 2U Rackmount
Model	€¢ CSE-219AC24-R1K62P-N24T

Dimension and Weight
Height	€¢ 3.5" (89mm)
Width	€¢ 17.2" (437mm)
Depth	€¢ 27.76" (705.3mm)
Weight	€¢ 72 lbs (32.7 kg)
Available Color	€¢ Black

Front Panel
Buttons	€¢ Power On/Off button €¢ System Reset button
LEDs	€¢ Power LED €¢ Hard drive activity LED €¢ 2x Network activity LEDs €¢ System information (overheat/UID) LED

Expansion Slots
PCI-Express	€¢ 2x PCI-E 3.0 x16 (FH, 10.5" L) slots €¢ 1x PCI-E 3.0 x8 (LP) slot

Drive Bays
Hot-swap	€¢ Total 26x Tool-less Hot-swap 2.5" drive bays (Front: 24, Rear: 2): 4 x Hybrid (NVMe/SATA3) ports - Optional SAS3 support via AOC

System Cooling
Fans	€¢ 4x 8cm heavy duty PWM fans

Power Supply
	1600W Redundant Power Supplies with PMBus
Total Output Power	€¢ 100 - 240V, 60-50Hz, 5-3 Amp
Dimension (W x H x L)	€¢ 5V + 3.3V ‰¤ 140W
Input	€¢ 25.0 amp
+12V	€¢ 2.0 amp
12Vsb	€¢ 18.0 Amp
Output Type	€¢ 1.0 Amp
Certification	€¢ 15.0 Amp

PC Health Monitoring
Voltage	€¢ Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. €¢ 5+1 Phase-switching voltage regulator
FAN	€¢ Support to monitor Supermicro AOC temperatures from IPMI or SD 5 €¢ Monitoring for CPU and chassis environment €¢ CPU thermal trip support €¢ Thermal Control for 8x Fan Connectors €¢ Thermal Monitor 2 (TM2) support €¢ PECI
LED	€¢ Memory DIMM ECC error LEDs €¢ CPU / System Overheat LED €¢ Suspend static indicator LED €¢ UID/Remote UID
Other Features	€¢ 4x 8-pin GPU power connectors €¢ Chassis intrusion detection €¢ Chassis intrusion header €¢ SDDC Support €¢ RoHS

Operating Environment / Compliance
RoHS	€¢ RoHS Compliant
Bios Features	€¢ Operating Temperature: 10°C to 35°C (50°F to 95°F) €¢ Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) €¢ Operating Relative Humidity: 8% to 90% (non-condensing) €¢ Non-operating Relative Humidity: 5% to 95% (non-condensing)