Supermicro 2U Rackmount Ultra Server SYS-2028U-E1CNR4T+ NVME

Call for price

In stock

SKU

SYS-2028U-E1CNR4T+

Key Features:
• Flexible Connectivity Options
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4€ / v3
   family; QPI up to 9.6GT/s
• Up to 3TB€ ECC 3DS LRDIMM , up to DDR4- 2400€ MHz ; 24x DIMM slots
• 6x PCI-E 3.0 x8 slots (4x FH, 10.5" L, 1x LP, 1x Internal LP)
• 4x 10GBase-T ports
• 24x Hot-swap 2.5" Drive Bays:
   Default 4x NVMe ports; 24x SAS3 ports via Expander and AOC:
   AOC-S3108L-H8iR, AOC-S3008L-L8e, AOC-S3008L-L8i
• 4x heavy duty fans w/ optimal fan speed control; 1x air shroud
• 1000W High efficiency (96%) Redundant PSU; Titanium Level

Due to the complexity of integration, this product is sold as completely assembled systems only (with minimum 2 CPU and 4 DIMM). Please contact Will Jaya for special requirements.

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-2028U-E1CNR4T+

Supermicro 2028U-E1CNR4T+ 2U Rackmount Server Barebone

Product SKU
SYS-2028U-E1CNR4T+	€¢ SuperServer 2028U-E1CNR4T+ (Black)

Motherboard
	Super X10DRU-i+

Processor/Cache
CPU	€¢ Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 160W TDP) * €¢ Dual Socket R3 (LGA 2011)
Cores/Cache	€¢ Up to 22 Cores€ / Up to 55MB€ Cache
System Bus	€¢ QPI up to 9.6 GT/s
Note	€¢ BIOS version 2.0 or above is required
	* Please contact Will Jaya for additional information about frequency optimized CPUs and specialized system optimization.

System Memory
Memory Capacity	€¢ 24x 288-pin DDR4 DIMM slots Up to 3TB€ ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type	€¢ 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	€¢ 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage	€¢ 1.2 V
Error Detection	€¢ Corrects single-bit errors

On-Board Devices
Chipset	€¢ Intel® C612 chipset
SATA	€¢ SATA3 (6Gbps) with RAID 0, 1, 5, 10
IPMI	€¢ Support for Intelligent Platform Management Interface v.2.0 €¢ IPMI 2.0 with virtual media over LAN and KVM-over-LAN support €¢ ASPEED AST2400 BMC
Network Controllers	€¢ 4x 10GBase-T ports via AOC-2URN4-i4XT €¢ Intel® X540 10GBase-T €¢ 1x Realtek RTL8211E PHY (dedicated IPMI)
Graphics	€¢ ASPEED AST2400 BMC

Input/Output
SAS	€¢ 24x SAS3 ports support via expander and storage Add-on Cards €¢ One of the following storage Add-on cards required: €¢ AOC-S3108-H8iR (12Gbps SAS3/RAID 0, 1, 5, 6, 10, 50, 60, 2GB DDR3 cache, PCI-E Gen3) €¢ AOC-S3008L-L8i (12Gbps SAS3/RAID 0,1 and 10, PCI-E Gen3) €¢ AOC-S3008L-L8e (12Gbps SAS3/HBA, PCI-E Gen3)
NVMe	€¢ 4x NVMe ports
LAN	€¢ 4x RJ45 10GBase-T LAN ports €¢ 1x RJ45 Dedicated IPMI LAN port
USB	€¢ 5x USB 3.0 ports (2 rear, 2 onboard header, 1 Type A)
Video	€¢ 1x VGA Connector
Serial Port/Header	€¢ 2x COM ports (1 rear, 1 header)
DOM	€¢ 2x SuperDOM (Disk on Module) ports

System Bios
Bios Type	€¢ 128Mb SPI Flash EEPROM with AMI BIOS
Bios Features	€¢ Plug and Play (PnP) €¢ APM 1.2 €¢ PCI 2.3 €¢ ACPI 1.0 / 2.0 / 3.0 / 4.0 €¢ USB Keyboard support €¢ SMBIOS 2.7.1 €¢ UEFI 2.3.1

Management
Software	€¢ SuperDoctor® 5 €¢ Intel® Node Manager 3.0 €¢ Watch Dog €¢ NMI €¢ SUM and SSM €¢ Optional IPMI 1.5 / 2.0
Power Configuration	€¢ ACPI Power Management €¢ Power-on mode for AC power recovery

Management

Software

€¢ SuperDoctor® 5
€¢ Intel® Node Manager 3.0
€¢ Watch Dog
€¢ NMI
€¢ SUM and SSM
€¢ Optional IPMI 1.5 / 2.0

Power Configuration

€¢ ACPI Power Management
€¢ Power-on mode for AC power recovery

Chassis
Form Factor	€¢ 2U Rackmount
Model	€¢ CSE-219UAC-R1K02

Dimension and Weight
Height	€¢ 3.5" (89mm)
Width	€¢ 17.2" (437mm)
Depth	€¢ 27.76" (705.3mm)
Gross Weight	€¢ 72 lbs (32.7 kg)

Front Panel
Buttons	€¢ Power On/Off button €¢ System Reset button
LED	€¢ Power LED €¢ HDD activity LED €¢ 2x Network activity LEDs €¢ System information (overheat/UID) LED

Expansion Slot
PCI-Express	€¢ Up to 6x PCI-E 3.0 x8 slots (4x FH, 10.5" L, 1x LP, 1x Internal LP)
	(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Expansion Slot

PCI-Express

€¢ Up to 6x PCI-E 3.0 x8 slots (4x FH, 10.5" L, 1x LP, 1x Internal LP)

(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)

Drive Bays
Hot-Swaps	€¢ 24x 2.5" Hot-swap drive bays €¢ Default 4x NVMe ports €¢ 24x SAS3 ports support via Expander and AOC
	Note: Storage Add-on card is required

Drive Bays

Hot-Swaps

€¢ 24x 2.5" Hot-swap drive bays
€¢ Default 4x NVMe ports
€¢ 24x SAS3 ports support via Expander and AOC

Note: Storage Add-on card is required

System Cooling
Fans	€¢ 4x 8cm heavy duty PWM fans
Shroud	€¢ 1x Air Shroud

Power Supply
	1000W Redundant Power Supplies with PMBus
Total Output Power	€¢ 800W/1000W
Dimension (W x H x L)	€¢ 73.5 x 40 x 203 mm
Input	€¢ 100-127Vac / 9.8 - 7A / 50-60Hz €¢ 200-240Vac / 7 - 5A / 50-60Hz
+12V	€¢ Max: 66.7A / Min: 0A (100-127Vac) €¢ Max: 83A / Min: 0A (200-240Vac)
12Vsb	€¢ Max: 2.1A / Min: 0A
Output Type	€¢ 25 Pairs Gold Finger Connector
Certification	€¢ Titanium Level

PC Health Monitoring
Voltage	€¢ Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. €¢ 5+1 Phase-switching voltage regulator
FAN	€¢ 8x 4-pin fan headers €¢ Status monitor for speed control €¢ Pulse Width Modulated (PWM) fan connectors
Temperature	€¢ Support to monitor Supermicro AOC temperatures from IPMI or SD 5 €¢ Monitoring for CPU and chassis environment €¢ CPU thermal trip support €¢ Thermal Control for 8x Fan Connectors €¢ Thermal Monitor 2 (TM2) support €¢ PECI
LED	€¢ Memory DIMM ECC error LEDs €¢ CPU / System Overheat LED €¢ Suspend static indicator LED €¢ UID/Remote UID
Other Features	€¢ 4x 8-pin GPU power connectors €¢ Chassis intrusion detection €¢ Chassis intrusion header €¢ SDDC Support €¢ RoHS

Operating Environment / Compliance
RoHS	€¢ RoHS Compliant
Environmental Spec.	€¢ Operating Temperature: 10°C to 35°C (50°F to 95°F) €¢Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) €¢ Operating Relative Humidity: 8% to 90% (non-condensing) €¢ Non-operating Relative Humidity: 5% to 95% (non-condensing)