Supermicro 2U Rackmount SuperServer SYS-2028R-C1R

Call for price

In stock

SKU

SYS-2028R-C1R

Key Features:
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4€ / v3
family; QPI up to 9.6GT/s
• Up to 2TB€ ECC 3DS LRDIMM , up to DDR4- 2400€ MHz ; 24x
DIMM slots
• 1x PCI-E 3.0 x16, 6x PCI-E 3.0 x8 slots
• 8x 2.5" SAS3 and 8x 2.5" SATA3 Hot-swap Drive Bays
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Intel® i350 Dual port GbE LAN
• I/O ports: 2x SuperDOM, 1x VGA, 2x COM, 2x USB 3.0, 4x USB 2.0
• 3x 8cm high-performance PWM fans
• 920W Redundant Power Supplies Platinum Level (94%)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-2028R-C1R

Supermicro 2028R-C1R 2U Rackmount Barebone with 920W Redundant Power Supplies, Intel® C612 chipset support 8x 2.5" SAS3 and 8x 2.5" SATA3 Hot-swap Drive Bays using
Supermicro X10DRH-C Server Motherboard and CSE-213AC-R920LPB 2U Rackmount Chassis.

Product SKU
SYS-2028R-C1R	SuperServer 2028R-C1R (Black)

Motherboard
	Super X10DRH-C

Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) * Dual Socket R3 (LGA 2011)
Cores/Cache	Up to 22 Cores€ / Up to 55MB€ Cache
System Bus	QPI up to 9.6 GT/s
Note	€ BIOS version 2.0 or above is required
	* Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization.

System Memory
Memory Capacity	16x 288-pin DDR4 DIMM slots Up to 2TB€ ECC 3DS LRDIMM, 512GB ECC RDIMM
Memory Type	2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes	RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors

On-Board Devices
Chipset	Intel® C612 chipset
SATA	SATA 3.0 (6Gbps) with RAID 0, 1, 5, 10
SAS	LSI 3108 SAS3 (12Gbps) controller; HW RAID 0, 1, 5, 6, 10, 50, 60
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Controllers	Intel® i350 Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics	ASPEED AST2400 BMC

Input/Output
SATA	8x SATA3 (6Gbps) ports
SAS	8x SAS3 (12Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports (rear) 4x USB 2.0 ports (2 rear, 2 front) 1x Type A
Video	1x VGA Connector
Serial Port/Header	2x Fast UART 16550 serial 2x COM Ports (1 rear, 1 header)

System Bios
Bios Type	128Mb SPI Flash EEPROM with UEFI BIOS
Bios Features	Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.3 UEFI RTC (Real Time Clock) Wakeup

System Bios

Bios Type

128Mb SPI Flash EEPROM with UEFI BIOS

Bios Features

Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
Hardware BIOS Virus protection
SMBIOS 2.3
UEFI
RTC (Real Time Clock) Wakeup

Chassis
Form Factor	2U Rackmount
Model	CSE-213AC-R920LPB

Dimension and Weight
Height	3.5" (89mm)
Width	17.2" (437mm)
Depth	24.8" (630mm)
Gross Weight	63.5 lbs (28.8 kg)

Front Panel
Buttons	Power On/Off button System Reset button
LED	Power status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED

Expansion Slot
PCI-Express	1x PCI-E 3.0 x16 6x PCI-E 3.0 x8 (Low-profile AOC)

Drive Bays
Hot-Swaps	8x 2.5" SAS3 and 8x 2.5" SATA3 Hot-swap drive bays
Peripherals	Optional DVD-ROM drive supports 1x slim or 1x 5.25" DVD drive

System Cooling
Fans	3x 8cm heavy duty fans with optimal fan speed control

Power Supply
	920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C
AC Input	100-240 V, 50-60 Hz, 11-4.5 Amp
DC Output	4 Amp @ +5V standby 75 Amp @ +12V
Certification	Platinum Certified

PC Health Monitoring
CPU	Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 6-Phase-switching voltage regulator
FAN	Total of five 4-pin PWM fans 5x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 10x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	Power Fail / Overheat LED Suspend-state Indicator LED UID LED
Other Features	SDDC Support

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 5°C to 40°C (41°F to 104°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)