Supermicro 2U Rackmount Server SYS-6024H-8RB

Call for price
In stock
SKU
SYS-6024H-8RB
Key Features:
• Dual Intel® 64-bit Xeon® Support up to 3.60 GHz
• Up to 16GB DDR 333 SDRAM (or)
   Up to 32GB DDR 266 SDRAM
• 6 Low-Profile Expansion Slots
   2 (x8) PCI-Express,
   1 x 64-bit 133MHz PCI-X,
   2 x 64-bit 100MHz PCI-X,
   1 x 32-bit 33MHz PCI Slots
• 2x Intel® 82541GI Single-port Gigabit Ethernet Controllers
• 6 x 3.5" hot-swap Ultra320/160 SCSI Drive Bays
• Redundant 500W power supply with I2C for remote management.
SuperServer SYS-6024H-8R / SYS-6024H-8RB 2U Rackmount

Supermicro SYS-6024H-8R / SYS-6024H-8RB 2U Rackmount Barebone with Redundant 500W power supply, Intel® E7520 chipset, 6x 3.5"SCA Hot-swap drive trays using
Supermicro Super X6DH8-G mother board and SC823S-R500LP Chassis.

Product SKU
SuperServer 6024H-8R (Beige)
SuperServer 6024H-8RB (Black)
Motherboard
        Super X6DH8-G
Processor/Cache
CPU

Dual 604-pin FC-mPGA4 Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
Xeon LV (Low Voltage) CPU, up to 2.8 GHz

System Bus

800 MHz system bus

System Memory
Memory Capacity Eight 184-pin DIMM sockets
Supports up to 16 GB DDR 333MHz memory, or
Supports up to 32 GB DDR 266MHz memory
Dual channel memory bus
Memory must be populated in pairs
Single-rank modules are recommended for 6+ DIMM support
Memory Type DDR333/266 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage 2.5 V only
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 Single Device Data Correction (SDDC)
On-Board Devices
Chipset Intel® E7520 chipset
MCH + 6300ESB + PXH/V +82541GI
SATA 6300ESB (Hance Rapids) SATA Controller
RAID 0, 1, JBOD support
SCSI

Adaptec AIC-7902 Controller
Dual-Channel Ultra320 SCSI
Host RAID 0, 1, 10, JBOD support

RAID

Support for Zero-Channel RAID
Optional Card not included

IPMI

Support for Intelligent Platform Management Interface v.2.0 (Optional)

Network Controllers

2x Intel® 82541GI Single Port Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

Graphics

ATI Rage XL SVGA PCI video controller with 8 MB of video memory

Super I/O  Winbond 83627HF chip
Expansion Slot
 

6x low-profile expansion slots

PCI-Express

2 (x8) slot

1x 64-bit 133MHz PCI-X (3.3V) slot
2x 64-bit 100MHz PCI-X (3.3V) slots
1x 32-bit 33MHz PCI (5V) slot
Input/Output
Serial ATA Two Serial ATA ports
Two SATA hard drives supported
IDE Dual EIDE channels support up to four UDMA IDE devices
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy 1 Floppy controller; 1.44 MB, 2.88 MB
LAN 2x RJ45 LAN port
USB 2x USB rear ports
2x USB internal headers
USB 2.0 Compliant / 1.1 Compliant
VGA 1x VGA port
Keyboard / Mouse

PS/2 keyboard and mouse ports

Serial Port / Header

2 Fast UART 16550 serial ports

Parallel Port  

1 ECP/EEP parallel port

 

 

Chassis
Form Factor 2U Rackmount
Model SC823S-R500LP
Dimension and Weight
Height 3.5" (89mm)
Width 16.8" (426mm)
Depth 25.6" (650mm)
Weight 56 lbs (25.4kg)
Available Color Beige,Black
Front Panel
Buttons Power On/Off button
System Reset button
LED Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED
Power fail LED
Ports none
Drive Bays
Hot-swap 6x 3.5"SCA Hot-swap drive trays
Peripheral Bay(s)  1x 5.25" full-height peripheral bay
Peripheral Drives
Floppy Panasonic 3.5" 1.44MB Floppy Drive
CD-Rom TEAC Slim 24x CD-ROM drive
SCA Backplane
  1x 2U SCA backplane (w/ SAF-TE)
System Cooling
Fans 4x 80mm 6300 RPM fans Cooling redundancy with fan shroud
Power Supply
  500W (1 + 1) Redundant AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V) ]
AC Voltage 100 - 240V, 50/60Hz, 10 Amp
DC Output 5V + 3.3V ≤ 160W
12V Total ≤ 39 Amp
+5V 30.0 amp
+5V standby 2.0 Amp
+12V1 15.0 amp
+12V2 15.0 amp
+12V3 18.0 amp
-12V 1.0 Amp
+3.3V 21.0 amp
PC Health Monitoring
CPU Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby
CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.836V-1.6V
Adjustable CPU clock frequency ratio settings (via BIOS)
FAN Total of eight 4-pin fan headers
8x fans with status monitoring
Status monitor with firmware/software on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connector
Temperature Monitoring for CPU, chassis environment
CPU thermal trip support
LED CPU Overheat LED
System Overheat LED
Suspend-state indicator LED
Other Features Chassis intrusion detection
Chassis intrusion header
SDDC
System Bios
Bios Type

8Mb Flash EEPROM with Phoenix® BIOS

Bios Features.

Plug and Play (PnP)
SMBIOS 2.3
DMI 2.1
ACPI 1.0
Fan Speed Control

 

Copyright © 2014-present Will Jaya Inc. All rights reserved.