Supermicro 2U Rackmount Server SYS-6024H-32RB

Call for price
In stock
SKU
SYS-6024H-32RB
Key Features:
• Dual Intel® 64-bit Xeon® Support up to 3.60 GHz
• Up to 16GB DDR2-400 SDRAM
• 6 Low-Profile Expansion Slots
   2 (x8) PCI-Express,
   1 x 64-bit 133MHz PCI-X,
   2 x 64-bit 100MHz PCI-X,
   1 x 32-bit PCI
• 2 x Intel® 82541PI Single-port Gigabit Ethernet Controllers
• 6 x 3.5" Hot-swap SAS / SATA Drive Bays
• 500W Redundant Power Supply
SuperServer SYS-6024H-32R / SYS-6024H-32RB 2U Rackmount

Supermicro SYS-6024H-32R / SYS-6024H-32RB 2U Rackmount Barebone with Redundant 500W power supply, Intel® E7520 chipset, 6x 3.5"SATA Hot-swap drive trays using
Supermicro Super X6DH3-G2 mother board and SC823T-R500LP Chassis.

Product SKU
SuperServer 6024H-32R (Beige)
SuperServer 6024H-32RB (Black)
Motherboard
        Super X6DH3-G2
Processor/Cache
CPU

Dual 604-pin FC-mPGA4 Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Xeon Dual Core (Paxville) CPU with 2x2MB L2 Integrated Advanced Transfer Cache
Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz
Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz
Xeon LV (Low Voltage) CPU, up to 2.8 GHz

System Bus

800 MHz system bus

OS Software Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
System Memory
Memory Capacity Eight 240-pin DIMM sockets
Supports up to 16 GB DDR2 400MHz memory
Dual channel memory bus
Memory must be populated in pairs
Single-rank modules are recommended for 6+ DIMM support
Memory Type DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 2GB
Memory Voltage 1.8V only
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 Single Device Data Correction (SDDC)
On-Board Devices
Chipset Intel® E7520 chipset
MCH + 6300ESB + PXH/V + 82541PI
SAS Adaptec AIC9410: Adaptec 8-port SAS Controller
RAID 0, 1, 10, JBOD support
SATA 6300ESB 2-port SATA Controller
SAS ZCR RAID 0, 1, 5, 10, and JBOD support
Support for Zero-Channel RAID
Optional Card not included
IPMI

Support for Intelligent Platform Management Interface v.2.0
(Optional: AOC-IPMI20-E)

Network Controllers

Dual Intel® 82541PI Single-Port Gigabit Controller

Graphics

ATI Rage XL SVGA PCI video controller with 8 MB of video memory

Super I/O  Winbond 83627HF chip
Input/Output
Serial ATA / SAS Two SAS connectors support up to 8 SAS or SATA drives
Two SATA connectors support 2 SATA drives
IDE Dual EIDE channels support up to four UDMA IDE devices
Supports ATA/100
Floppy 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
LAN 2x RJ45 LAN port
USB 2x USB rear ports
2x USB internal headers
USB 2.0 Compliant / 1.1 Compliant
VGA 1x VGA Port
Keyboard / Mouse

PS/2 keyboard and mouse ports

Serial Port / Header

1 Fast UART 16550 serial ports
1 header

 

 

 

 

 

Chassis
Form Factor 2U Rackmount
Model SC823T-R500LP
Dimension and Weight
Height 3.5" (89mm)
Width 16.8" (426mm)
Depth 25.6" (650mm)
Weight 51 lbs (23.1kg)
Available Color Beige,Black
Front Panel
Buttons Power On/Off button
System Reset button
LED Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED
Ports 2x USB Ports (optional)
Expansion Slot
PCI-Express 2 (x8) PCI-e slots
PCI-X 1x 64-bit 133MHz PCI-X (3.3V) slot
2x 64-bit 100MHz PCI-X (3.3V) slots
PCI 1x PCI slot
(Low-profile Add-on Cards Only)
Drive Bays
Hot-swap 6x 3.5"SATA Hot-swap drive trays
Peripheral Bay(s)  1x 5.25" full-height peripheral bay
Peripheral Drives
Floppy Panasonic 3.5" 1.44MB Floppy Drive
Backplane
  1x 2U SAS Backplane (without SESII)
System Cooling
Fans 4x 80mm 6300 RPM fans Cooling redundancy with fan shroud
Power Supply
  500W (1 + 1) Redundant AC power supply with PFC [ 24-pin, (8-pin, 4-pin)=12V) ]
AC Voltage 100 - 240V, 50/60Hz, 10 Amp
DC Output 5V + 3.3V ≤ 160W
12V Total ≤ 39 Amp
+5V 30.0 amp
+5V standby 2.0 Amp
+12V1 15.0 amp
+12V2 15.0 amp
+12V3 18.0 amp
-12V 1.0 Amp
+3.3V 21.0 amp
System Bios
BIOS Type 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features  Plug and Play (PnP)
SMBIOS 2.3
DMI 2.1
ACPI 1.0
Fan Speed Control
PC Health Monitoring
CPU Monitors for CPU Cores, CPU0, CPU1, +3.3V, +5V, ±12V
FAN Total of four 4-pin fan headers and four 3-pin fan headers
8x fans with tachometer status monitoring
Low noise fan speed control
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 support
Other Features

Chassis intrusion detection
Chassis intrusion header

 

Copyright © 2014-present Will Jaya Inc. All rights reserved.