Supermicro 2U Rackmount Server SYS-6022P-6B
• Dual Intel® Xeon® Support up to 3.0 GHz
• Up to 16GB DDR 266/200 SDRAM
• 6x Low-profile, Full-length 64-bit PCI-X expansion slot
• Dual Intel® 82550 10/100 Ethernet Ports
• Zero Channel RAID Support
• 6 x 3.5" hot-swap Ultra160 SCSI Drive Bays
• 400W power supply
Super P4DP6 mother board and SC822S-400LP Chassis.
Product SKU |
|
|---|---|
| SYS-6022-P6 | SuperServer 6022P-6 (Beige) |
| SYS-6022-P6B | SuperServer 6022P-6B (Black) |
Motherboard |
|
|---|---|
| Super P4DP6 | |
Processor/Cache |
|
|---|---|
| CPU | Dual mPGA604 ZIF Sockets |
| System Bus | 400MHz system bus |
System Memory |
|
|---|---|
| Memory Capacity |
Eight 184-pin DIMM sockets Supports up to 16 GB DDR266/200 memory Dual channel memory bus Memory must be populated in pairs |
| Memory Type | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
On-Board Devices |
|
|---|---|
| Chipset | Intel® E7500 chipset MCH + ICH3-S + P64H2 |
| SCSI | Adaptec AIC-7899W Controller |
| RAID | Support for Zero-Channel RAID w/ Adaptec 2000S ZCR Card (Card NOT included) |
| IPMI | Support for Intelligent Platform Management Interface v.1.5 (Optional) |
| Network Controllers | Dual Intel® 82550 10/100 Ethernet |
| Graphics | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
Expansion Slot |
|
|---|---|
| 6x low-profile full-length 64-bit PCI-X expansion slots | |
Input/Output |
|
|---|---|
| PCI Expansion | Max 2x 64-bit 133MHz PCI-X (3.3V) slots
Default: 2x 64-bit 100/66MHz PCI-X (3.3V) slot 4x 64-bit 66MHz PCI-X (3.3V) slots 1x VXB (Virtual Extended Bus) slot |
| IDE | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| USB | Up to 5 USB ports |
| Serial Port | 2 Fast UART 16550 serial ports |
| Parallel Port | 1 ECP/EEP parallel port |
| Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
System Bios |
|
|---|---|
| Bios Type | 4Mb Flash EEPROM with Phoenix® BIOS |
| Bios Features | Plug and Play (PnP) |
Chassis |
|
|---|---|
| Form Factor | 2U Rackmount |
| Model | SC822S-400LP |
Dimension and Weight |
|
|---|---|
| Height | 3.5" (89mm) |
| Width | 16.8" (426mm) |
| Depth | 25.6" (650mm) |
| Weight | 49 lbs (22.3kg) |
| Available Color | Beige,Black |
Front Panel |
|
|---|---|
| Buttons |
Power On/Off button System Reset button |
| LED | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
Drive Bays |
|
|---|---|
| Hot-swap | 6x 3.5"SCA Ultra160 Hot-swap drives |
| Peripheral Bay(s) | 1x 5.25" full-height peripheral bay |
SCSI Backplane |
|
|---|---|
| 1x Single-Channel 2U SCA Ultra160 backplane (w/o SAF-TE) | |
System Cooling |
|
|---|---|
| Fans | 4x 80mm blower fans |
Power Supply |
|
|---|---|
| 2U 400W AC power supply w/ PFC | |
| AC Voltage | 100 - 240V, 50/60Hz, 7 Amp |
| DC Output | 12V + 5V + 3.3V ‰¤ 385W |
| +5V | 33.0 amp |
| +5V standby | 2.0 Amp |
| -5V | 0.8 amp |
| +12V | 25.0amp |
| -12V | 1.0 amp |
| +3.3V | 28.0 amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby CPU Core 3-Phase-switching voltage regulator w/ auto-sense from 1.4V-3.5V Adjustable CPU clock frequency ratio settings (via BIOS) |
| FAN | Total of seven 3-pin fan headers 4x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control |
| Temperature | Monitoring for CPU, chassis, environment CPU thermal trip support |
| LED | CPU Overheat LED |
| Other Features | Chassis intrusion detection (through LDCM) |