Supermicro 2U Rackmount NVME Ultra Server SYS-6028R-TDWNR
• Data Center Optimized
• Support 4x 2.5" NVMe Drive Bays
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4€ / v3
family; QPI up to 9.6GT/s
• Up to 2TB€ ECC 3DS LRDIMM , up to DDR4- 2400€ MHz ; 16x
DIMM slots
• 1x PCI-E 3.0 x16 (FHHL) 2x PCI-E 3.0 x8 (FHHL) 1x PCI-E 3.0 x8 (LP)
• 8x 3.5" Hot-swap SATA3 + 4x 2.5" NVMe Drive Bays
• Intel® i350 Dual-Port 1GbE LAN
• I/O ports: 1x VGA, 2x USB 3.0, 2x USB 2.0
• 920W Redundant Power Supplies Platinum Level Certified
• 2x SuperDOM (Disk on Module) ports
• IPMI 2.0 + KVM with Dedicated LAN
using Supermicro Super X10DDW-iN Server Motherboard and CSE-826BAC4-R920WB 2U Rackmount Chassis.
Product SKU |
|
|---|---|
| SYS-6028R-TDWNR | SuperServer 6028R-TDWNR (Black) |
Motherboard |
|
|---|---|
| Super X10DDW-iN | |
Processor/Cache |
|
|---|---|
| CPU | Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) * |
| Cores/Cache | Up to 22 Cores€ / Up to 55MB€ Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | € BIOS version 2.0 or above is required |
* Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
System Memory |
|
|---|---|
| Memory Capacity |
16x 288-pin DDR4 DIMM slots Up to 2TB€ ECC 3DS LRDIMM, 1TB ECC RDIMM |
| Memory Type | 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes |
RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB LRDIMM: 64GB, 32GB 3DS LRDIMM: 128GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
On-Board Devices |
|
|---|---|
| Chipset | Intel® C612 chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Connectivity | Intel® i350 Dual Port Gigabit Ethernet |
| Graphics | ASPEED AST2400 BMC |
Input/Output |
|
|---|---|
| SATA | 8x SATA3 (6Gbps) ports |
| NVMe | 4x Internal NVMe ports |
| LAN |
2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 3x USB 3.0 ports (2 rear, 1 Type A) 4x USB 2.0 ports (2 rear, 2 headers) |
| Video | 1x VGA port |
| Serial Port/Header | 1x COM port (header) |
| DOM | 2x SuperDOM (Disk on Module) ports |
Management |
|
|---|---|
| Software |
IPMI 2.0 Intel® Node Manager SuperDoctor® 5 SSM SPM SUM Watch Dog |
| Power Configurations | ACPI Power Management
|
Chassis |
|
|---|---|
| Form Factor | 2U Rackmount |
| Model | CSE-826BAC4-R920WB |
Dimension and Weight |
|
|---|---|
| Height | 3.5" (89mm) |
| Width | 17.2" (437mm) |
| Depth | 25.5" (648mm) |
| Gross Weight | 64 lbs (29.0 kg) |
Front Panel |
|
|---|---|
| Buttons |
Power On/Off button System Reset button |
| LED | Power status LED HDD activity LED 2x Network activity LEDs Universal Information (UID) LED Power fail LED |
Expansion Slot |
|
|---|---|
| PCI-Express | 1 PCI-E 3.0 x16 (FHHL) slot 2 PCI-E 3.0 x8 (FHHL) slots 1 PCI-E 3.0 x8 (LP) slot |
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
|
Drive Bays |
|
|---|---|
| Hot-Swaps | 8x 3.5" Hot-swap SATA3 Drive Bays 4x 2.5" NVMe Drive Bays |
Backplane |
|
|---|---|
| SAS3/SATA3 Backplane 4x 2.5" NVMe drives |
|
System Cooling |
|
|---|---|
| Fans | 3x 8cm fans with optimal fan speed control |
Power Supply |
|
|---|---|
| 920W Redundant High-Efficiency Power Supplies w/ Power Distributor, PMBus 1.2, I2C, and PFC | |
| AC Input | 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output | +5V standby: 4A +12V: 75A |
| with Power Distributor | +5V: 45A +3.3V: 24A -12V: 0.6A |
| Certification | Platinum Certified |
System Bios |
|
|---|---|
| Bios Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| Bios Features | Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 / 3.0 / 4.0 BIOS resuce hot keys USB Keyboard support SMBIOS 2.3 UEFI |
Operating Environment / Compliance |
|
|---|---|
| RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature:
5°C to 40°C (41°F to 104°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |