Supermicro 2U Rackmount GPU SuperServer SYS-2028GR-TRH
• Up to 6 GPU
• Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4€ / v3
family; QPI up to 9.6GT/s
• Up to 2TB€ ECC 3DS LRDIMM , up to DDR4- 2400€ MHz ; 16x
DIMM slots
• 6x PCI-E 3.0 x16 slots (GPU/MIC, opt.), 1x PCI-E 3.0 x8 (in x16) low-profile slot
• Intel® i350 Dual-Port GbE LAN
• 10x Hot-swap 2.5" SATA Drive Bays
• 2000W Redundant Power Supplies Platinum Level (94%+)
• 5x heavy duty cooling fans
• Smart server management tools
X10DRG-H Server Motherboard and CSE-218GH-R2K03B 2U Rackmount Chassis.
Product SKU |
|
---|---|
SYS-2028GR-TRH | €¢ SuperServer 2028GR-TRH (Black) |
Motherboard |
|
---|---|
Super X10DRG-H |
Processor/Cache |
|
---|---|
CPU | €¢ Intel® Xeon® processor E5-2600 v4€ / v3 family (up to 145W TDP) * |
Cores/Cache | €¢ Up to 22 Cores€ / Up to 55MB€ Cache |
System Bus | €¢ QPI up to 9.6 GT/s |
Note | €¢ € BIOS version 2.0 or above is required |
* Please contact Will Jaya Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
|
GPU/Xeon Phi Support | €¢ K1/K2/K10/K40/K80/M40/M60/Xeon Phi |
System Memory |
|
---|---|
Memory Capacity |
€¢ 16x 288-pin DDR4 DIMM slots €¢ Up to 2TB€ ECC 3DS LRDIMM, 1TB ECC RDIMM |
Memory Type | €¢ 2400€ /2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes |
€¢ RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB €¢ LRDIMM: 64GB, 32GB €¢ 3DS LRDIMM: 128GB |
Memory Voltage | €¢ 1.2 V |
Error Detection | €¢ Corrects single-bit errors |
On-Board Devices |
|
---|---|
Chipset | €¢ Intel® C612 chipset |
SATA | €¢ Intel C612 Controller €¢ SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | €¢ Support for Intelligent Platform Management Interface v.2.0 €¢ IPMI 2.0 with virtual media over LAN and KVM-over-LAN support €¢ ASPEED AST2400 BMC |
Network Connectivity | €¢ Intel® i350 Dual Port Gigabit Ethernet |
Graphics | €¢ ASPEED AST2400 BMC |
Input/Output |
|
---|---|
SATA | €¢ 10x SATA3 (6Gbps) ports |
LAN |
€¢ 2x RJ45 Gigabit Ethernet LAN ports €¢ 1x RJ45 Dedicated IPMI LAN port |
USB | €¢ 4x USB 3.0 ports (2 rear, 2 via header) €¢ 2x USB 2.0 ports (2 via headers) |
Video | €¢ 1x VGA Connector |
Serial Port | €¢ 1x Serial header |
System Bios |
|
---|---|
Bios Type | €¢ 128Mb SPI Flash EEPROM with AMI® BIOS |
Bios Features | €¢ Plug and Play (PnP)
|
Chassis |
|
---|---|
Form Factor | €¢ 2U Rackmount |
Model | €¢ CSE-218GH-R2K03B |
Dimension and Weight |
|
---|---|
Height | €¢ 3.5" (89mm) |
Width | €¢ 17.2" (437mm) |
Depth | €¢ 31" (787mm) |
Gross Weight | €¢ 54 lbs (24.5 kg) |
Front Panel |
|
---|---|
Buttons |
€¢ Power On/Off button €¢ System Reset button |
LED | €¢ Power status LED €¢ HDD activity LED €¢ 2x Network activity LEDs €¢ System Overheat LED / Fan fail LED / UID LED |
Expansion Slot |
|
---|---|
PCI-Express | €¢ 6x PCI-E 3.0 x16 slots
(support GPU/Xeon Phi cards, option) €¢ 1x PCI-E 3.0 x8 (in x16) low-profile slot |
Drive Bays |
|
---|---|
Hot-Swaps | €¢ 10x 2.5" Hot-swap drive bays |
System Cooling |
|
---|---|
Fans | €¢ 5x 8cm heavy duty fans with optimal fan speed control |
Power Supply |
|
---|---|
2000W 1U Redundant Power Supplies with PMBus | |
Total Output Power | €¢ 1000W/1800W/1980W/2000W |
Dimension (W x H x L) | €¢ 73.5 x 40 x 265 mm |
Input | €¢ 100-120Vac / 11.8-9.8A / 50-60Hz €¢ 200-220Vac / 10-9.5A / 50-60Hz €¢ 220-230Vac / 10-9.8A / 50-60Hz €¢ 230-240Vac / 10-9.8A / 50-60Hz €¢ 200-240Vac / 11.8-9.8A / 50-60Hz (UL/cUL only) |
+12V | €¢ Max: 83.3A / Min: 0.1A (100-120Vac) €¢ Max: 150A / Min: 0.1A (200-220Vac) €¢ Max: 165A / Min: 0.1A (220-230Vac) €¢ Max: 166.7A / Min: 0.1A (230-240Vac) €¢ Max: 166.7A / Min: 0.1A (200-240Vac) (UL/cUL only) |
12V SB | €¢ Max: 3.5A / Min: 0A |
Output Type | €¢ 25 Pairs Gold Finger Connector |
Certification | €¢ Platinum Certified |
PC Health Monitoring |
|
---|---|
CPU | €¢ Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. €¢ 5 Phase-switching voltage regulator |
FAN | €¢ Total of five 4-pin PWM fans €¢ 5x fans with tachometer monitoring €¢ Status monitor for speed control €¢ Status monitor for on/off control €¢ Low noise fan speed control |
Temperature | €¢ Monitoring for CPU and chassis environment €¢ CPU thermal trip support €¢ Thermal Control for 10x Fan Connectors €¢ PSU I2C temperature sensing logic €¢ Thermal Monitor 2 (TM2) support €¢ PECI |
LED | €¢ Power Fail / Overheat LED €¢ Suspend-state Indicator LED €¢ UID LED |
Other Features | €¢ SDDC SupportS 2.3 |
Operating Environment / Compliance |
|
---|---|
RoHS | €¢ RoHS Compliant |
Environmental Spec. | €¢ Operating Temperature:
5°C to 40°C (41°F to 104°F) €¢ Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) €¢ Operating Relative Humidity: 8% to 90% (non-condensing) €¢ Non-operating Relative Humidity: 5% to 95% (non-condensing) |