Supermicro 2U Rackmount A+ AMD EPYC Servers AS-2113S-WN24RT
Key Features:
• Hyperconverged Storage
• Single AMD EPYC„¢ 7000-Series Processor
• Up to 2TB of memory
• Expansion slots: 1 PCI-E 3.0 x16 (FH/HL) slot
• 24 hot-swap 2.5" U.2 NVMe drive bays
• 1200W Redundant Power Supplies
Titanium Level (96%)
Product SKU
| |
---|---|
AS-2113S-WN24RT | • A+ Server 2113S-WN24RT |
Motherboard
| |
---|---|
• H11SSW-NT |
Processor/Chipset
|
|
---|---|
CPU | • Single AMD EPYC„¢ 7000-series Processor • Socket SP3 |
Cores | • Up to 32 Cores |
Note | Please contact Will Jaya Technical Support for specifics on high power processor support |
System Memory
| |
---|---|
Memory Capacity | • 16 DIMM slots • Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM • 8-channel memory bus |
Memory Type | • DDR4 2666 MHz Registered ECC, 240-pin gold-plated DIMMs |
Memory Sizes | • 4GB, 8GB, 16GB, 32GB, 64GB, 128GB |
Memory Voltage | • 1.2V |
Error Detection | • Corrects single-bit errors |
On-Board Devices
| IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support • ASPEED AST2500 BMC |
Network Controllers | • Broadcom BCM57416 Controller |
---|---|
VGA | • ASPEED AST2500 BMC |
Expansion Slots
| |
---|---|
PCI Express | • 1 PCI-E 3.0 x16 (FH/HL) slot |
M.2 | • Interface: PCI-E 3.0 x4 (NVMe based) |
Input/Output
| NVMe | • Up to 24 U.2 NVMe support |
---|---|
LAN | • 2x 10GbBase-T LAN ports • 1 RJ45 Dedicated IPMI LAN port |
USB | • 5 USB 3.0 ports (4 rear + 1 Type A) |
VGA | • 1 VGA port |
Others | •
1 COM port • 2 SATA DOM power connectors • TPM 1.2 header |
System BIOS
| |
---|---|
BIOS Type | • AMI 128Mb SPI Flash EEPROM |
BIOS Features |
• Plug and Play (PnP) |
Chassis
| |
---|---|
Form Factor | • 2U |
Model | • CSE-216BTS-R1K23WBP |
Dimension and Weight
| |
---|---|
Width | • 3.5" (89mm) |
Height | • 17.2" (437mm) |
Depth | • 24.8" (630mm) |
Gross Weight | • 59 lbs (26.76 kg) |
Available Colors | • N.A. |
Front Panel
| |
---|---|
Buttons | • Power On/Off button |
LEDs |
• Power LED |
Drive Bays
| |
---|---|
Hot-swap | • 24 hot-swap 2.5" U.2 NVMe drive bays |
System Cooling
| |
---|---|
Fans | • 3 heavy-duty PWM fans with optimal fan speed control |
Air Shroud | • 1 Air Shroud |
Power Supply (76mm Width)
| |
---|---|
1200W Redundant Power Supplies with PMBus | |
Total Output Power | • 1000W/1200W |
Dimension
(W x H x L) |
• 76 x 40 x 336 mm |
Input | • 100-127Vac / 15-12A / 50-60Hz • 200-240Vac / 8.5-7A / 50-60Hz • 200-240Vdc / 8.5-7A (for CCC only) |
+12V | • Max: 83A / Min: 0A (100-127Vac) • Max: 100A / Min: 0A (200-240Vac) • Max: 100A / Min: 0A (200-240Vdc) |
+5Vsb | • Max: 4A / Min: 0A |
Output Type | • 19 Pairs Gold Finger Connector |
Certification | • 80Plus Titanium Level |
PC Health Monitoring
| |
---|---|
CPU |
• Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +5V standby, 3.3V standby, VBAT |
FAN | • Up to 6-fan status tachometer monitoring |
Temperature | • Monitoring for CPU and chassis environment |
LED | • CPU / System Overheat LED |
Other Feature | • Chassis Intrusion Detection |
Operating Environment / Compliance
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. | • Operating Temperature:
10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |