Supermicro 2U Rackmount A+ AMD EPYC Server AS -2123BT-HNR
Key Features:
• Four hot-pluggable systems (nodes) in a 2U form factor
• Dual AMD EPYC„¢ 7000-Series Processors
• Up to 2TB of memory
• 6 Hot-swap 2.5" NVMe drive bays
• Video via Aspeed AST2500 BMC
• 2600W Redundant Power Supplies Titanium Level (96%)
Product SKU
| |
---|---|
AS -2123BT-HNR | • A+ Server 2123BT-HNR (Black) |
Motherboard (per node)
| |
---|---|
• Super H11DST-B |
Processor/Chipset (per node)
|
|
---|---|
CPU | • Dual AMD EPYC„¢ 7000-series Processors • Socket SP3 |
Cores | • Up to 32 Cores |
Note | Please contact Will Jaya Technical Support for specifics on high power processor support |
System Memory (per node)
| |
---|---|
Memory Capacity | • 16 DIMM slots • Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs • 8-channel memory bus • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
Memory Type | • DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs |
Memory Sizes | • 8GB, 16GB, 32GB, 64GB, 128GB |
Memory Voltage | • 1.2V |
Error Detection | • Corrects single-bit errors |
On-Board Devices (per node)
| Chipset | • System on Chip | Network | • Must bundle with at least one SIOM network card |
---|---|
IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Video |
• ASPEED AST2500 BMC |
Input/Output (per node)
| LAN | • Provided via SIOM (optional) • 1 RJ45 Dedicated IPMI LAN port |
---|---|
USB | • 2 USB 3.0 ports (rear) |
Video | • 1 VGA port |
DOM | • 1 SuperDOM (Disk on Module) port |
Others | •
1 COM port (header) • TPM 2.0 header |
System BIOS (per node)
| |
---|---|
BIOS Type | • AMI 128Mb SPI Flash ROM |
Management (per node)
| |
---|---|
Software | • IPMI 2.0 |
Power Configuration |
• ACPI / APM Power Management |
Chassis
| |
---|---|
Form Factor | • 2U Rackmount |
Model | • CSE-217BHQ+-R2K60BP |
Dimension and Weight
| |
---|---|
Width | • 17.25" (438mm) |
Height | • 3.47" (88mm) |
Depth | • 28.5" (724mm) |
Gross Weight | • 85 lbs (38.6 kg) |
Available Colors | • Black |
Front Panel (per node)
| |
---|---|
Buttons | • Power On/Off button |
LEDs |
• Power status LED |
Expansion Slots (per node)
| |
---|---|
PCI-Express | • 2 PCI-E 3.0 (x16) Low-profile slots |
M.2 |
• Interface: 1 SATA/PCI-E 3.0 x4 |
Drive Bays (per node)
| |
---|---|
Hot-swap | • 6 Hot-swap 2.5" NVMe drive bays |
System Cooling
| |
---|---|
Fans | • 4 Heavy duty 8cm PWM fans |
AC/DC240V Input Redundant Power Supply
| |
---|---|
2600W Redundant Power Supplies with PMBus | |
Total Output Power | • 2600W |
Dimension
(W x H x L) |
• 45 x 40 x 480 mm |
Input | • 208-240Vac/15-12.5A / 50-60Hz • 220-240Vdc/13.5-12.5A (CQC only) |
+12V | • Max: 216.6A / Min: 0A |
12Vsb | • Max: 4.5A / Min: 0A |
Output Type | • Gold Finger (4HP+2LP-20S output connector) |
Certification | • Titanium Level |
Operating Environment / Compliance
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. | • Operating Temperature:
10°C ~ 30°C (50°F ~ 85°F)
All CPU SKUs supported 10°C ~ 35°C (50°F ~ 95°F) • Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |