Supermicro 2U Rackmount A+ AMD EPYC Server AS-2122TC-DL6RF4
Key Features:
• Two hot-pluggable systems (nodes) in a 2U form factor
• Supports Dual AMD Opteron„¢ 4000 processors
• Up to 192GB of memory
• 12x 2.5" Hot-swap SAS2/SATA/SSD HDDs (24 total)
• IPMI 2.0 with dedicated LAN
• 1280W High-Efficiency Platinum Level Redundant Power Supplies
Product SKU
| |
---|---|
AS-2122TC-DL6RF4 | • A+ Server 2122TC-DL6RF4 |
Motherboard
| |
---|---|
• rboard Super H8DCT-HLN4F |
Processor/Chipset
|
|
---|---|
CPU | • Dual 1207-pin Socket C32 • Supports two 8/6/4-Core ready AMD Opteron„¢ 4000 Series processors • HT3.0 Link support |
Chipset | • AMD chipset SR5670 + SP5100 |
Note | €¢ Supports 4000 series processors with Max ACP 75W (TDP 95W) |
System Memory (per node)
| |
---|---|
Memory Capacity | • 12 DIMM sockets • Support up to 192GB Registered ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs • Dual channel memory bus • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
Memory Type | • DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
DIMM Sizes | • 1GB, 2GB, 4GB, 8GB, 16GB |
Memory Voltage | • 1.35V or 1.5V |
Error Detection | • Corrects single-bit errors |
On-Board Devices (per node)
| SATA | • AMD SP5100 (RAID 0, 1, 10) | SAS | • LSI 6Gbps SAS 2008 IT Mode | IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM over LAN support • Winbond® WPCM450 BMC |
---|---|
Network Controllers | • Intel® I350 Quad Gigabit Ethernet LAN controller • 10/100/1000BASE-T support |
VGA | • Matrox G200 16MB DDR2 |
Super I/O |
• Winbond® W83527 chip |
Expansion Slots (per node)
| PCI-E | • 1x PCI-E 2.0 x16, 1x PCI-E 2.0 x8 in x4 (for SAS adapter card support) |
---|
Input/Output (per node)
| SATA | • 6x SATA (3Gb/s) ports | SAS | • Integrated LSI 2008 IT Mode SAS2 RAID Controller | LAN | • 4 RJ45 LAN ports • 1 RJ45 Dedicated LAN supports IPMI |
---|---|
USB | • 4x USB 2.0 ports • 2x Rear, 1x header (2 ports) |
VGA | • 1x VGA port |
Serial Ports | • 1x Fast UART 16550 serial port |
System BIOS (per node)
| |
---|---|
BIOS Type | • 16Mb SPI Flash ROM with AMI® BIOS |
BIOS Features |
• Plug and Play (PnP) |
Chassis
| |
---|---|
Form Factor | • 2U Twin Rackmount |
Model | • CSE-217HD-R1K28BP |
Dimension and Weight
| |
---|---|
Height | • 3.5" (89mm) |
Width | • 17.25" (438mm) |
Depth | • 28.5" (724mm) |
Gross Weight | • 85 lbs / 38.6 kg |
Available Colors | • Black |
Front Panel
| |
---|---|
Buttons | • 4x Power On/Off button |
LEDs |
• 4x Power status LED |
Drive Bays
| |
---|---|
Hot-swap | • 24x Hot-swap 2.5" HDD (12 for each node) |
System Cooling
| |
---|---|
Fans | • 4x 80mm PWM cooling fans |
Power Supply
| |
---|---|
1280W Redundant High-efficiency Digital Power Supplies w/ PMBus 1.2 | |
AC Input | • 1000W Output @ 100-140V, 8-12A, 50-60Hz • 1280W Output @ 180-240V, 6-8A, 50-60Hz |
DC Output |
• 1000W: +12V/83A; +5Vsb/4A • 1280W: +12V/106.7A, +5Vsb/4A |
Certification | • 80Plus Platinum Certified |
PC Health Monitoring
| |
---|---|
CPU | • Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, VBAT, HT, memory, chipset |
FAN | • Up to 4-fan status tachometer monitoring • Up to four 4-pin fan headers • Status monitor for speed control • 3-pin fan support (w/o speed control) • Low noise fan speed control (4-pin fan only) • Pulse Width Modulated (PWM) fan connectors |
Temperature | • Monitoring for CPU and chassis environment • CPU Thermal Trip Support • Thermal control for 8x Fan connectors • I2C Temperature Sensing Logic |
LED | • CPU / System Overheat LED • +5V Standby Alert LED |
Operating Environment / Compliance
| |
---|---|
RoHS |
• RoHS Compliant |
Environmental Spec. |
• Operating Temperature:
10°C to 30°C (50°F to 86°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |