Supermicro 1U Twin Multi-Node Rackmount SYS-6016TT-IBXF

Call for price

In stock

SKU

SYS-6016TT-IBXF

Key Features:
Two systems (nodes) in a 1U form factor. Each node supports the following:
• Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
• Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM/
48GB Unbuffered DIMM
• 1 (x16) PCI-E ( Low Profile)
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Mellanox ConnectX-2 DDR Infiniband 20Gbps Controller w/ QSFP connector
• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• 2x Hot-swap SATA Drive Bays
• 1200W Gold-level High-efficiency Power Supply

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-6016TT-IBXF 1U Rackmount

Supermicro SYS-6016TT-IBXF 1U Rackmount with 1200W Gold-level High-efficiency Power Supply, Intel® 5520 (Tylersburg) chipset support 2x 3.5" SATA Hot-swap drive bays,using
Supermicro Super X8DTT-IBXF + Super X8DTT-IBXF Motherboard and CSE-808T-1200B 1U Rackmount Chassis

Product SKU
SYS-6016TT-IBXF	SuperServer 6016TT-IBXF (Black)

Motherboard
	Super X8DTT-IBXF + Super X8DTT-IBXF

Processor/Cache
CPU	Dual 1366-pin LGA Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W
QPI	up to 6.4 GT/s

System Memory
Memory Capacity	12x 240-pin DIMM slots Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory Memory Mirroring supported
Memory Type	1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage	1.5 V / 1.35V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices (per node)
Infiniband	Mellanox ConnectX-2 QDR Infiniband 20Gbps Controller
Chipset	Intel® 5520 (Tylersburg) chipset ICH10R + IOH-36D
SATA	Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows)
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Controllers	Intel® 82576 Dual-Port Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT 3 support for fast, scaleable, and reliable networking VMDq support for better performance of virtualization 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	Matrox G200eW 16 MB DDR2
Super I/O	Winbond W83527HG chip
Clock Generator	932S421 chip

Input/Output (per node)
Serial ATA	Six Serial ATA ports Six SATA hard drives supported
LAN	2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2 rear + 1 header (2 Ports) 4 total USB ports, 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Serial Port	1 Fast UART 16550 serial port
Infiniband	1 External QSFP Infiniband Connector

System Bios (per node)
Bios Type	32Mb SPI Flash EEPROM with AMI® BIOS
Bios Features	Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support

System Bios (per node)

Bios Type

32Mb SPI Flash EEPROM with AMI® BIOS

Bios Features

Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support

Chassis
Form Factor	1U Rackmount
Model	CSE-808T-1200B

Dimension and Weight
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	27.75" (705mm)
Weight	40 lbs (18.1kg)
Available Color	Black

Front Panel (per node)
Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard Drive Activity LED 2x Network activity LEDs System Overheat LED

Expansion Slots (per node)
PCI-Express	1 (x16) PCI-E ( Low Profile)

Drive Bays (per node)
Hot-Swap	2x 3.5" SATA Hot-swap drive bays

SATA Backplane
	1U SATA Backplane

System Cooling
Fans	6x Cooling Fans

Power Supply
	1200W high-efficiency power supply with PMBus
AC Input	1000W Output @ 100-140V, 11.5-8A, 50-60Hz 1200W Output @ 180-240V, 8-5.5A, 50-60Hz
DC Output	1000W: +12V/83A; +5Vsb/4A 1200W: +12V/100A; +5Vsb/4A
Certification	Gold Certified

Management
Software	IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support SuperDoctor® III Watch Dog NMI
Power Configuration	ACPI Power Management Main Switch Override Mechansim Power-on mode for AC power recovery

PC Health Monitoring
CPU	Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 6-Phase-switching voltage regulator
FAN	Total of four 4-pin PWM fans 4x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 4x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	Power Fail / Overheat LED Suspend-state Indicator LED UID LED
Other Features	SDDC Support

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 5Â°C to 35Â°C (41Â°F to 95Â°F) Non-operating Temperature: -40Â°to 70Â°C (-40Â°to 158Â°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)