Supermicro 1U Twin Multi-Node Rackmount SYS-6015TC-10GB Server
Key Features:
Two systems (nodes) in a 1U form factor. Each node supports the following:
• Quad & Dual Core Intel® 64-bit Xeon® Support 1333 / 1066 MHz FSB
• Up to 48GB 667/533MHZ DDR2 ECC Registered DIMM
• 1 (x16) PCI-e slot (Low Profile)
• Intel® 82598EB 10 Gigabit + 82573V + 82573L Ethernet Controllers
• 2x Hot-swap SATA Drive Bays
• 780W High-efficiency Power Supply
Supermicro SYS-6015TC-10GB 1U Rackmount with 780W High-efficiency Power Supply, Intel® 5100 (San Clemente) chipset, support 2x 3.5" SATA Hot-swap drive bays,using
Super X7DCT-10G + Super X7DCT-10G Motherboard and SC808T-780 Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-6015TC-10GB | SuperServer 6015TC-10GB (Black) |
Motherboard |
|
|---|---|
| Super X7DCT-10G + Super X7DCT-10G | |
Processor/Cache |
|
|---|---|
| CPU | Dual 771-pin LGA Sockets |
| System Bus | 1333 / 1066 MHz system bus |
| Operating System Software | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
System Memory (per node) |
|
|---|---|
| Memory Capacity |
Six 240-pin DIMM sockets Supports up to 48 GB 667/533MHz DDR2 ECC Register DIMM memory Dual channels memory bus |
| Memory Type | 677/533MHzECC Register DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8V only |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices (per node) |
|
|---|---|
| Chipset | Intel® 5100 (San Clemente) chipset |
| SATA | Intel ICH9R SB SATAII Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0, v.1.5 200-pin IPMI slot (SIMSO(+)) (Optional: AOC-SIMSO(+)) KVM feature is available with dedicated LAN only |
| Network Controllers | Intel® 82598EB 10 Gigabit Ethernet Controller with CX4 interface Intel® 82573V & 82573L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output Intel® I/OAT support for fast, scaleable, and reliable networking |
| Graphics | ATI ES1000 controller with 32 MB of video memory |
| Super I/O | Winbond W83627HG chip |
| Clock Generator | ICS9LPR501 chip |
Input/Output (per node) |
|
|---|---|
| Serial ATA | Four Serial ATA ports Four SATA hard drives supported |
| LAN | 2x RJ45 LAN ports 1x CX4 LAN port |
| USB | 2 rear + 1 Type A connector + 2 headers (2 Ports) |
| VGA | 1x VGA Port |
| Serial Port / Header | 1 Fast UART 16550 serial port |
System Bios |
|
|---|---|
| Bios Type | 16Mb SPI Flash with Phoenix ® BIOS |
| Bios Features | Plug and Play (PnP)
|
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | SC808T-780 |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 27.75" (705mm) |
| Weight | 40 lbs (18.1kg) |
| Available Color | Black |
Front Panel (per node) |
|
|---|---|
| Buttons | Power On/Off button |
| LEDs | Power LED Hard Drive Activity LED 2x Network activity LEDs System Overheat LED |
Expansion Slots (per node) |
|
|---|---|
| PCI-Express | 1 (x16) PCI-e slot (Low Profile) |
Drive Bays (per node) |
|
|---|---|
| Hot Swap | 2x 3.5" SATA Hot-swap drive bays |
SATA Backplane |
|
|---|---|
| 1U SATA Backplane |
|
System Cooling |
|
|---|---|
| Fans | 6x Cooling Fans |
Power Supply |
|
|---|---|
| 780W AC to DC power supply w/ PFC | |
| AC Input | 100-240V, 60-50Hz, 9.5-3.5Amp |
| +5V sb | 4 Amp |
| +12V | 65 Amp @ 180-240Vac 58 Amp @ 100-140Vac |
Management |
|
|---|---|
| Software | Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0 SuperDoctor® III Watch Dog NMI |
| Power Configuration |
ACPI Power Management Main Switch Override Mechanism Power-on mode for AC power recovery |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of three 4-pin fans 3x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend-state Indicator LED |
| Other Features | SDDC Support |
Operating Environment / Compliance |
|
|---|---|
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F) |