Supermicro 1U Twin Multi-Node Rackmount SYS-5015TB-10GB Server

Call for price

In stock

SKU

SYS-5015TB-10GB

Key Features:
Two systems (nodes) in a 1U form factor. Each node supports the following: • Intel® Xeon® 5600/5500 series (QPI up to 6.4 GT/s)
• Intel® Xeon® 3000 Sequence and Coreâ„¢ 2 Extreme / Quad / Duo Series in
LGA775 Package (FSB 1600/1333/1066/800 MHz)
• Up to 8GB unbuffered non-ECC DDR3 1333/1066/800 SDRAM or up to
4 GB Non-ECC 1600MHz XMP DDR3 memory
• 1 (x16) PCI-e 2.0 slot (Low Profile)
• Intel® 82598EB 10 Gigabit + 82573V + 82573L Ethernet Controllers
• 2x Hot-swap SATA Drive Bays
• 780W High-efficiency Power Supply

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-5015TB-10GB 1U Rackmount

Supermicro SYS-5015TB-10GB 1U Rackmount with Intel® X48 chipset, 2x 3.5" SATA Hot-swap drive bays, using Super X7SBT-10G + Super X7SBT-10G and CSE-808LT-780B
Rackmount Chassis

Product SKU
SYS-5015TB-10GB	SuperServer 5015TB-10GB (Black)

Motherboard
	Super X7SBT-10G + Super X7SBT-10G

Processor/Cache
CPU	Single LGA775 ZIF Socket Supports Quad-Core Intel® Xeon® X3300/X3200 series Supports Dual-Core Intel® Xeon® E3100/3000 series Supports Intel® Xeon® processor L3360 and L3110 series Supports Intel® Coreâ„¢2 Quad Q9000/Q8000/Q6000 series Supports Intel® Coreâ„¢2 Duo E8000/E7000/E6000/E4000 series Supports Intel® Pentium® E5000/E2000 series Supports Intel® Celeron® E1000 and 400 series NOTE: 1600MHz CPU has to use 1600 MHz XMP Memory
System Bus	1600 / 1333 / 1066 / 800 MHz system bus

Processor/Cache

CPU

Single LGA775 ZIF Socket
Supports Quad-Core Intel® Xeon® X3300/X3200 series
Supports Dual-Core Intel® Xeon® E3100/3000 series
Supports Intel® Xeon® processor L3360 and L3110 series
Supports Intel® Coreâ„¢2 Quad Q9000/Q8000/Q6000 series
Supports Intel® Coreâ„¢2 Duo E8000/E7000/E6000/E4000 series
Supports Intel® Pentium® E5000/E2000 series
Supports Intel® Celeron® E1000 and 400 series

NOTE: 1600MHz CPU has to use 1600 MHz XMP Memory

System Bus

1600 / 1333 / 1066 / 800 MHz system bus

System Memory (per node)
Memory Capacity	Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600MHz XMP DDR3 memory
Memory Type	DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600MHz XMP DDR3 memory
DIMM Sizes	256 MB, 512 MB, 1 GB, 2 GB
Memory Voltage	Dynamic (1.5V to 1.9V)

On-Board Devices (per node)
Chipset	Intel X48 chipset ICH9R + Intel® 82573V + Intel® 82573L
Serial ATA	Intel® ICH9R SATA controller built-in (3 Gbps) RAID 0, 1, 5, 10 (Windows) RAID 0, 1, 10 (Linux)
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support SIMSO Slot - Supermicro Intelligement Management (Optional: AOC-SIMSO-HTC, AOC-SIMSO+) NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
Network Controllers	Intel® 82598EB 10 Gigabit Ethernet Controller with CX4 interface Intel® 82573V & 82573L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA	On-board XGI Volari Z9S (32MB) graphics
Super I/O	Winbond 83627DHG chip
Clock Generator	IDT CV152

Input/Output (per node)
Serial ATA	Four Serial ATA ports (3 Gbps performance) Four SATA hard drives supported
LAN	2x RJ45 LAN ports
USB	Up to 8x USB 2.0 / 1.1 compliant ports 2 rear ports + 2 internal headers + 2 Type A ports
VGA	1x VGA port
Serial Port / Header	1x Fast UART 16550 serial port 1x internal header

System Bios (per node)
Bios Type	16Mb Flash EEPROM with Phoenix BIOS
Bios Features	Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 (S3 Optional) ACPI 1.0 (limited) USB Keyboard support Hardware BIOS Virus protection

System Bios (per node)

Bios Type

16Mb Flash EEPROM with Phoenix BIOS

Bios Features

Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0 / 2.0 (S3 Optional)
ACPI 1.0 (limited)
USB Keyboard support
Hardware BIOS Virus protection

Chassis
Form Factor	1U Rackmount
Model	CSE-808LT-780B

Dimension and Weight
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	27.75" (705mm)
Weight	40 lbs (18.1kg)
Available Color	Black

Front Panel (per node)
Buttons	Power On/Off button System Reset button
LEDs	Power Status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED

Expansion Slot (per node)
PCI-Express	1 (x16) PCI-e 2.0 slot (Low Profile)

Drive Bays (per node)
Hot-swap	2x 3.5" SATA Hot-swap drive bays

SATA Backplane (per node)
	1U SATA Backplane

System Cooling
Fans	6x Cooling Fans

Power Supply
	780W AC to DC power supply w/ PFC
AC Input	100-240V, 60-50Hz, 9.5-3.5Amp
+5V stand by	4 Amp
+12V	65 Amp @ 180-240Vac 58 Amp @ 100-140Vac

Management
Software	SuperDoctor® III Watch Dog NMI
Power Configuration	ACPI / ACPM Power Management Main Switch Override Mechanism Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode control for AC power loss recovery

PC Health Monitoring (per node)
CPU	Monitors for CPU Cores, +1.8V, +3.3V, +5V, Â±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages. CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
FAN	Total of three 4-pin fan headers 3x fans with tachometer monitoring Status monitor with firmware / software speed control Status monitor for on/off control Low noise fan speed control
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor (TM2) Support PECI
LED	CPU / System Overheat LED Suspend-state indicator LED

Operating Environment / Compliance
RoHS	RoHS Compliant 5/6, Server Exemption
Environmental Spec.	Operating Temperature: 10Â°C to 40Â°C (50Â°F to 104Â°F) Non-operating Temperature: -40Â°C to 70Â°C (-40Â°F to 158Â°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)