Supermicro 1U Twin Multi-Node Rackmount SYS-1025TC-3FB Server
Call for price
In stock
SKU
SYS-1025TC-3FB
Key Features:
Two systems (nodes) in a 1U form factor. Each node supports the following:
• Quad & Dual Core Intel® 64-bit Xeon® Support 1333 / 1066 MHz FSB
• Up to 48GB 667/533MHZ DDR2 ECC Registered DIMM
• 1 (x8) PCI-e (in x16 slot - Low Profile)
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Intel® 82575 Dual-Port Ethernet Controller
• 4x Hot-swap 2.5" SAS Drive Bays
• 780W High-efficiency Power Supply
Two systems (nodes) in a 1U form factor. Each node supports the following:
• Quad & Dual Core Intel® 64-bit Xeon® Support 1333 / 1066 MHz FSB
• Up to 48GB 667/533MHZ DDR2 ECC Registered DIMM
• 1 (x8) PCI-e (in x16 slot - Low Profile)
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Intel® 82575 Dual-Port Ethernet Controller
• 4x Hot-swap 2.5" SAS Drive Bays
• 780W High-efficiency Power Supply
SuperServer SYS-1025TC-3FB 1U Rackmount
Supermicro SYS-1025TC-3FB
1U Rackmount SuperServer with 780W High-efficiency Power Supply Intel® C602 Chipset, 4x 2.5" SAS Hot-swap drive bays using Super X7DCT-3F +
Super X7DCT-3F Server Motherboard and SC809T-780B 1U Rackmount Server chassis.
Super X7DCT-3F Server Motherboard and SC809T-780B 1U Rackmount Server chassis.
Product SKU |
|
|---|---|
| SYS-1025TC-3FB | SuperServer 1025TC-3FB (Black) |
Motherboard |
|
|---|---|
| Super X7DCT-3F + Super X7DCT-3F | |
Processor/Cache |
|
|---|---|
| CPU | Dual 771-pin LGA Sockets Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown /Clovertown processor) up to 3.16 GHz Dual-Core Intel® Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz |
| System Bus | 1333 / 1066 MHz system bus |
| OS Software | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
System Memory (per node) |
|
|---|---|
| Memory Capacity | Six 240-pin DIMM sockets Supports up to 48 GB 667/533MHz DDR2 ECC Register DIMM memory Dual channels memory bus |
| Memory Type | 677/533MHzECC Register DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 1GB, 2GB, 4GB, 8GB** |
| Memory Voltage | 1.8V only |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices (per node) |
|
|---|---|
| Chipset | Intel® 5100 (San Clemente) chipset Intel® ICH9R SB |
| SAS | LSI SAS1064E |
| SATA | Intel ICH9R SB SATAII Controller |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Connectivity | Intel® 82575 Dual-Port Gigabit Ethernet Controllers |
| Graphics | Matrox G200 8MB DDR2 |
| Super I/O | Winbond W83627HG chip |
| Clock Generator | ICS9LPR501 chip |
Input/Output (per node) |
|
|---|---|
| SAS | 4 SAS / SATA ports |
| Serial ATA |
Four Serial ATA ports |
| LAN |
2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 2 rear + 1 Type A connector + 2 headers (2 Ports) 5 total USB ports, 2.0 Compliant / 1.1 Compliant |
| VGA | 1x VGA port |
| Serial Port | 1 Fast UART 16550 serial port |
System Bios |
|
|---|---|
| Bios Type | 16Mb SPI Flash with Phoenix ® BIOS |
| Bios Features | Plug and Play (PnP)
|
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | SC809T-780B |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 27.75" (705mm) |
| Gross Weight | 40 lbs (18.1kg) |
| Available Color | Black |
Front Panel (per node) |
|
|---|---|
| Buttons |
Power On/Off button System Reset button |
| LED |
Power status LED HDD activity LED 2x Network activity LEDs System Overheat LED |
Expansion Slots (per node) |
|
|---|---|
| PCI-Express |
1 (x8) PCI-e (in x16 slot - Low Profile) |
Drive Bays (per node) | 1x 1U SAS / SATA backplane
|
|---|---|
| Hot Swap | 4x 2.5" SAS Hot-swap drive bays |
SATA Backplane |
|
|---|---|
| 1U SATA Backplane | |
System Cooling |
|
|---|---|
| Fans | 6x Cooling Fans |
Power Suplly |
|
|---|---|
| 780W AC to DC power supply w/ PFC | |
| AC Input | 100-240V, 60-50Hz, 9.5-3.5Amp |
| +5V sb | 4 Amp |
| +12V | 65 Amp @ 180-240Vac 58 Amp @ 100-140Vac |
Management |
|
|---|---|
| Software | Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 SuperDoctor® III Watch Dog NMI |
| Power Configuration | ACPI Power Management Main Switch Override Mechansim Power-on mode for AC power recovery |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +5 Stdby, VBAT CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of three 4-pin fans 3x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | CPU / System Overheat LED Suspend-state Indicator LED |
| Other Features | SDDC Support |
Operating Environment / Compliance |
|
|---|---|
| RoHS | RoHS Compliant |
| Environmental Spec. |
Operating Temperature:
5°C to 35°C (41°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |