Supermicro 1U Rackmount SuperStorage SSG-5018A-AR12L
Call for price
In stock
SKU
SSG-5018A-AR12L
Key Features:
• Single socket FCBGA 1283 supports Intel® Atom® processor C2750
• System on Chip
• 12x 3.5" Hot-swap HDD bays
• Up to 64GB Unbuffered ECC/non-ECC DDR3 1600MHz in 4x DIMM slots
• 1x PCI-E 2.0 x4 (in x8, LP, HL)
• Dual GbE LAN ports with SoC
• Integrated IPMI 2.0 and KVM with Dedicated LAN
• I/O ports: IPMI, 2x GbE, VGA
• 400W High-efficiency redundant short depth Power Supplies
• Single socket FCBGA 1283 supports Intel® Atom® processor C2750
• System on Chip
• 12x 3.5" Hot-swap HDD bays
• Up to 64GB Unbuffered ECC/non-ECC DDR3 1600MHz in 4x DIMM slots
• 1x PCI-E 2.0 x4 (in x8, LP, HL)
• Dual GbE LAN ports with SoC
• Integrated IPMI 2.0 and KVM with Dedicated LAN
• I/O ports: IPMI, 2x GbE, VGA
• 400W High-efficiency redundant short depth Power Supplies
Due to the complexity of integration, this product is sold as completely assembled systems only (including but not limited to CPUs, memory, and 12 HDDs). Please contact your Supermicro sales rep for special requirements.
SuperServer SSG-5018A-AR12L
Supermicro SSG-5018A-AR12L 1U Rackmount Barebone with 400W High-efficiency redundant short depth Power Supplies, Intel® Atom® processor C2750 Socket on Chip support
12x 3.5" Hot-swapHDD bays using Supermicro Super A1SA7-2750F Atom Motherboard and CSE-801LTS-R406P 1U Rackmount Chassis.
12x 3.5" Hot-swapHDD bays using Supermicro Super A1SA7-2750F Atom Motherboard and CSE-801LTS-R406P 1U Rackmount Chassis.
Product SKU |
|
---|---|
SSG-5018A-AR12L | SuperServer 5018A-AR12L |
Motherboard |
|
---|---|
Super A1SA7-2750F |
Processor/Cache |
|
---|---|
CPU | Intel® Atomâ„¢ Processor C2750 |
System Memory |
|
---|---|
Memory Capacity |
4x 240-pin DDR3 DIMM slots Supports up to 64GB DDR3 ECC or non-ECC UDIMM memory |
Memory Type | 1600/1333MHz ECC DDR3 SDRAM, 204-pin gold-plated DIMMs |
DIMM Sizes | 16GB, 8GB, 4GB, 2GB |
Memory Voltage | 1.5 V, 1.35 V |
On-Board Devices |
|
---|---|
Chipset | Socket on Chip |
SAS/SATA | SoC controller for 1 SATA3 (6Gbps) port LSI 2116 SW controller for 16 SATA3 ports, SATA3 or SAS2 with IT mode |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
Network Connectivity | Dual LAN w/ SoC, I354 Built in LAN GbE MACs |
VGA | ASPEED AST2400 BMC |
Input/Output |
|
---|---|
LAN |
2 RJ45 GbE LAN ports 1 RJ45 Dedicated IPMI LAN port |
USB | 3 USB 2.0 ports (2 rear, 1 Type A) |
DOM | 1x SATA DOM (Disk on Module) power connector for OS drive |
VGA | 1 VGA port
|
Chassis |
|
---|---|
Form Factor | 1U Rackmount |
Model | CSE-801LTS-R406P |
Dimension and Weight |
|
---|---|
Height | 1.7" (43mm) |
Width | 17.2" (437mm) |
Depth | 32" (813mm) |
Gross Weight | 38 lbs (16.5kg) |
Front Panel |
|
---|---|
Buttons | Power On/Off button |
LED | Network activity LEDs |
Expansion Slots |
|
---|---|
PCI-Express |
1x PCI-E 2.0 x4 (in x8, Low-profile, Half-height) slot |
Drive Bays |
|
---|---|
Internal | 12x 3.5" Hot-swap HDD bays |
Backplane |
|
---|---|
SAS/SATA HDD Backplane |
System Cooling |
|
---|---|
Fans | 6x 40x28mm PWM cooling fans |
Power Supply |
|
---|---|
400W Redundant Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC | |
AC Input | 100-240V, 50-60Hz, 6-3A 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz |
DC Output | +5V standby: 3A +12V: 33A |
DC Output With Power Distributor | +5V: 25A +3.3V: 25A -12V: 0.6A |
System Bios |
|
---|---|
Bios Type | 16MB SPI Flash EEPROM with AMI BIOS |
Bios Features | DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
Operating Environment / Compliance |
|
---|---|
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature:
10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |