Supermicro 1U Rackmount SuperServer SYS-8017R-TF+

Call for price

In stock

SKU

SYS-8017R-TF+

Key Features:
• Quad socket R (LGA 2011) supports Intel® Xeon® processor E5-4600 v2 (12-Core)** or E5-4600 (8-Core) family, w/ QPI up to 8.0 GT/s
• Up to 1TB* DDR3 1866MHz ECC Registered DIMM; 32x DIMM slots * Depends on memory configuration
• 1x PCI-E 3.0 x16 Low-profile Slot
• Intel® i350 Dual port GbE LAN
• I/O ports: 2x GbE LAN, 1x Dedicated LAN for IPMI Remote Management, 1x VGA, 1x COM port, 4x USB 2.0
• 3x 3.5" Hot-swap SATA2 Drive Bays
• 7x 4cm Counter Rotating Fans with speed control
• 1400W High Efficiency Digital PS Platinum Level (94%)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-8017R-TF+

Supermicro 8017R-TF+ 1U Rackmount Server Barebone

Product SKU
SYS-8017R-TF+	SuperServer 8017R-TF+ (Black)

Motherboard
	Super X9QRi-F+

Processor/Cache
CPU	Intel® Xeon® processor E5-4600 v2 (12-Core) or E5-4600 (8-Core) family (up to 130W CPU at 35Â°C) Quad Socket R (LGA 2011) BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.
Cache	Up to 30MB.
System Bus	QPI up to 8 GT/s

Processor/Cache

CPU

Intel® Xeon® processor E5-4600 v2 (12-Core)** or E5-4600 (8-Core) family (up to 130W CPU at 35Â°C)
Quad Socket R (LGA 2011)

** BIOS rev. 3.0 or above is needed to support Ivy Bridge-EP 4S.

Cache

Up to 30MB.

System Bus

QPI up to 8 GT/s

System Memory
Memory Capacity	32x 240-pin DDR3 DIMM slots Supports up to 1TB DDR3 ECC Registered memory (RDIMM) in 32 DIMM slots
Memory Type	1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	Intel® C602 chipset
SATA	SATA 2.0 3Gbps with RAID 0, 1, 5 SATA 3.0 6Gbps with RAID 0, 1
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Connectivity	Intel® i350 Dual port GbE LAN Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201F PHY (dedicated IPMI)
Graphics	Matrox G200eW (Nuvoton WPCM450 BMC)
Super I/O	Nuvoton W83527HG

Input/Output
SATA	2x SATA 3.0 ports (6Gbps) 4x SATA 2.0 ports (3Gbps)
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x dedicated LAN port for IPMI
USB	4x USB 2.0 rear ports
Video	1x VGA Port
Serial Port/Header	1 Fast UART 16550 serial port

System Bios
Bios Type	16MB SPI Flash EEPROM with AMI® BIOS
Bios Features	Plug and Play (PnP) PCI 2.2 ACPI up to 3.0 USB Keyboard support

Chassis
Form Factor	1U Rackmount
Model	CSE-818A-1K43LPB

Dimension and Weight
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	27.75" (705mm)
Gross Weight	48.5 lbs
Available Colors	Black

Front Panel
Buttons	Power On/Off button System Reset button
LED	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED

Expansion Slots
PCI-Express	1x PCI-E 3.0 x16 Low-profile Slot

Drive Bays
Hot-swap	3x 3.5" Hot-swap SATA3 HDD Bays with RAID 0, 1, 5 (Software RAID)

Backplane
	SAS/SATA HDD Backplane (SAS support requires optional SAS controller)

Peripheral Drives
DVD-ROM	1x Slim DVD-ROM (Optional)

System Cooling
Fans	7x 4cm Counter-rotating fans with optimal fan speed control
Shroud	1x Air Shroud

Power Supply
	1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
AC Voltage	1200W: 100-140 V, 14.7-10.5A, 50-60 Hz 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
+5V standby	6 Amp
+12V	100 Amp/115 Vac 117 Amp/230 Vac
With Power Distributor	+5V: 30 Amp +3.3V: 25 Amp -12V: 0.6 Amp
Certification	Platinum Certified

PC Health Monitoring
CPU	Monitors for CPU Cores, +1.2V, 1.5V, +3.3V, +12V, (+3V, 1.0V, 1.2V, 1.8V, 1.1V) Standby, VBAT, Memory, Chipset Voltages. 4-Phase-switching voltage regulator with auto-sense from 0.6V-1.35V
FAN	4-pin fan headers with tachometer status monitoring Low noise fan speed control mode
Temperature	Monitoring for CPU and system environment Thermal Control for 10x fan connectors
Other Features	Chassis intrusion detection

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10Â°C to 35Â°C (50Â°F to 95Â°F) Non-operating Temperature: -40Â°C to 70Â°C (-40Â°F to 158Â°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)