Supermicro 1U Rackmount SuperServer SYS-6017R-TDF+

Call for price

In stock

SKU

SYS-6017R-TDF+

Key Features:
• Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 familyâ€
• Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM slots
• 1x PCI-E 3.0 x8 Full-height, Half-length Expansion slot
• Intel® i350 Dual port Gigabit Ethernet
• 4x 3.5" Hot-swap SATA HDD Bays
• 600W High-efficiency power supply Gold Level Certified

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-6017R-TDF+

Supermicro 6017R-TDF+ 1U Rackmount Server Barebone with 600W High-efficiency power supply Gold Level Certified, Intel C602J Chipset. 4x 3.5" Hot-swap SATA HDD Bays using
Supermicro Super X9DRD-EF Server Motherboard and CSE-813T-600CB 1U Rackmount Server Chassis.

Product SKU
SYS-6017R-TDF+	SuperServer 6017R-TDF+ (Black)

Motherboard
	Super X9DRD-EF

Processor/Cache
CPU	Dual Socket R (LGA 2011) Intel® Xeon® processor E5-2600 and E5-2600 v2 familyâ€ (60W to 115W TDP)
Cache	Up to 30MB
System Bus	QPI up to 8 GT/s
Note	â€ BIOS version 3.0 or above is required
	Please contact WillJaya Technical support for additional information

System Memory
Memory Capacity	16x 240-pin DDR3 DIMM slots Up to 1TB DDR3 ECC LRDIMM Up to 512GB DDR3 ECC Registered memory (RDIMM) Up to 128GB DDR3 ECC/non-ECC Un-Buffered memory (UDIMM)
Memory Type	1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V, 1.35 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	Intel® C602J Chipset
SATA	Via Cable for SATA controller SATA 2.0 (3Gbps) & 3.0 (6Gbps) with RAID 0, 1, 5, 10
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC
Network Connectivity	Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10GBASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics	Matrox G200eW

Input/Output
Serial SATA	2x SATA 3.0 ports (6Gbps) 2x SATA 2.0 ports (3Gbps)
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	9x USB 2.0 ports total (4x rear + 4x via header + 1x Type A)
VGA	1x VGA port
Serial Port/Header	2x Fast UART 16550 ports (rear/header)

Chassis
Form Factor	1U Rackmount
Model	CSE-813T-600CB

Dimension and Weight
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	25.6" (650mm)
Gross Weight	36 lbs (16.4kg)
Available Color	Black

Front Panel
Buttons	Power On/Off button System Reset button UID button
LED	Power status LED HDD activity LED 2x Network activity LEDs System information (overheat/UID) LED

Expansion Slots
PCI-Express	1x PCI-E 3.0 x16 Full-height, Half-length (Both CPUs need to be installed for full access to PCI-E slots. See manual for details.)

Expansion Slots

PCI-Express

1x PCI-E 3.0 x16 Full-height, Half-length

(Both CPUs need to be installed for full access to PCI-E slots. See manual for details.)

1x 1U SAS / SATA backplane

Drive Bays
Hot Swap	4x 3.5" Hot-swap SATA HDD trays

Backplane
	1x 1U SAS / SATA backplane

System Cooling
Fans	2x blower fans 1x 40 x 28mm 13K RPM 4-pin fan

Power Suplly
	600W AC multi output power supply w/ PFC
AC Voltage	100-240 V, 50-60 Hz, 7.5-3.1 Amp
+5V	20 Amp
+5V standby	3 Amp
+12V	49 Amp
+3.3V	16 Amp
Certification	Gold Certified

System Bios
Bios Type	128Mb SPI Flash EEPROM with AMI BIOS
Bios Features	Plug and Play (PnP) APM 1.2 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 UEFI

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10Â°C to 35Â°C (50Â°F to 95Â°F) Non-operating Temperature: -40Â°C to 70Â°C (-40Â°F to 158Â°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)