Supermicro 1U Rackmount SuperServer SYS-6016T-GTF

Call for price
In stock
SKU
SYS-6016T-GTF

Key Features:
• Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
• Up to 192GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM /
   48GB Unbuffered DIMM
• 1 (x16) PCI-E 2.0 (FHFL)
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Intel® 82576 Dual-Port Gigabit Ethernet Controller
• 3x Hot-swap SATA Drive Bays
• 1400W Gold-level High-efficiency Power Supply

SuperServer SYS-6016T-GTF 1U Rackmount

Supermicro SYS-6016T-GTF 1U Rackmount with 1400W Gold-level High-efficiency Power Supply, Intel® 5500 (Tylersburg) chipset support 3x 3.5" Hot-swap drive bays,using
Supermicro Super X8DTT-FServer Motherboard and CSE-818G-1400B 1U Rackmount Chassis


Product SKU
SuperServer 6016T-GTF (Black)
Motherboard
       Super X8DTT-F
Processor/Cache
CPU

Dual 1366-pin LGA Sockets
Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 95W
Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W

QPI up to 6.4 GT/s
System Memory
Memory Capacity 12x 240-pin DIMM slots
Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
Memory Mirroring supported
Memory Type 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage 1.5 V / 1.35V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset

Intel® 5500 (Tylersburg) chipset
ICH10R + IOH-36D

SATA Intel ICH10R SATA 3.0Gbps Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
IPMI  Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers  Intel® 82576 Dual-Port Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT 3 support for fast, scaleable, and reliable networking
VMDq support for better performance of virtualization
1x Realtek RTL8201N PHY (dedicated IPMI)
Graphics Matrox G200eW 8 MB DDR2
Super I/O Winbond W83527HG chip
Clock Generator 932S421 chip
Input/Output
Serial ATA Six Serial ATA ports
Six SATA hard drives supported
LAN 2x RJ45 LAN ports
1x RJ45 Dedicated IPMI LAN port
USB

2 rear + 1 header (2 Ports)
4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA 1x VGA Port
Serial Port 1 Fast UART 16550 serial port
System Bios
Bios Type 32Mb SPI Flash EEPROM with AMI® BIOS
Bios Features

Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support

 

 

 

 

Chassis
Form Factor 1U Rackmount
Model CSE-818G-1400B
Dimension and Weight
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 28.2" (716mm)
Weight 38 lbs (17.2 kg)
Available Color Black
Front Panel
Buttons

Power On/Off button
System Reset button

LEDs Power LED
Hard Drive Activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED / UID LED
Expansion Slots
PCI-Express

1 (x16) PCI-E (FHFL)

Drive Bays
Hot-Swap

3x 3.5" Hot-swap drive bays

Backplane
 

SAS/SATA HDD Backplane (SAS support requires optional SAS controller)

System Cooling
Fans 4x 4cm heavy-duty counter-rotating PWM fans with optimal fan speed control
Power Supply
  1400W high-efficiency power supply with PMBus
AC Input 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp
DC Output +5V standby 4 Amp
DC Output +12V 100 Amp @ 100-140V
117 Amp @ 180-240V
With Power
Distributor
+5V: 14 Amp
Certification Gold Certified
PC Health Monitoring
CPU Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
CPU Core 6-Phase-switching voltage regulator
FAN Total of four 4-pin PWM fans
4x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 4x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED Power Fail / Overheat LED
Suspend-state Indicator LED
UID LED
Other Features SDDC Support
Operating Environment / Compliance
RoHS RoHS Compliant
Environmental Spec.

Operating Temperature: 5°C to 35°C (41°F to 95°F)
Non-operating Temperature: -40°to 70°C (-40°to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

Copyright © 2014-present Will Jaya Inc. All rights reserved.