Supermicro 1U Rackmount SuperServer SYS-6015C-MTB Server
Key Features:
• Dual Intel® 64-bit Xeon® Quad-Core or Dual-Core, with 1333 / 1066 MHz FSB
• Up to 48GB 667/533MHZ DDR2 ECC Register SDRAM *
• 1 (x8) PCI-E Slot
• Intel® 82573V & 82573L Gigabit Ethernet Controller
• 4 x 3.5" Hot-swap SATA Drive Trays
• 520W High-efficiency Power Supply
Supermicro SYS-6015C-MT / SYS-6015C-MTB 1U Rackmount with 520W High-efficiency Power Supply, Intel® 5100 (San Clemente) chipset, support 4x 3.5" Hot-swap SATA drive bays,
using
Super X7DCL-i Motherboard and CSE-813MTQ-520C Rackmount Chassis
Product SKU |
|
---|---|
SYS-6015C-MT | SuperServer 6015C-MT (Beige) |
SYS-6015C-MTB | SuperServer 6015C-MTB (Black) |
Motherboard |
|
---|---|
Super X7DCL-i |
Processor/Cache |
|
---|---|
CPU | Dual 771-pin LGA Sockets |
System Bus | 1333 / 1066 MHz system bus |
Operating System Software | Supports 64-bit Operating Systems Supports 32-bit Operating Systems |
System Memory |
|
---|---|
Memory Capacity |
Six 240-pin DIMM sockets Supports up to 48GB 667/ 533MHz DDR2 ECC Register Single/Dual Rank memory * Dual channels memory bus Memory must be populated in pairs |
Memory Type | 667/533MHz Register DDR2 ECC Single/Dual Rank SDRAM 72-bit, 240-pin gold-plated DIMMs * |
DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB, 8GB** |
Memory Voltage | 1.8V only |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
On-Board Devices |
|
---|---|
Chipset | Intel® 5100 (San Clemente) chipset |
SATA | Intel ICH9R SB SATAII Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux) |
IPMI | Support for Intelligent Platform Management Interface v.2.0 / 1.5 200-pin IPMI slot (SIMLC) (Optional: AOC-SIMLC) NOTE: KVM-over-LAN supported w/ AOC-SIM1U+ - PCB 1.1A only |
Network Controllers | Intel® 82573V & 82573L Gigabit Ethernet Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Graphics | XGI Z9 with 32 MB of video memory |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 chip |
Input/Output |
|
---|---|
Serial ATA | Six Serial ATA ports Four SATA hard drives supported |
IDE | Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card Supports UDMA Mode 5, PIO Mode 4, and ATA/100 Compact Flash (40-pin connector, IDE 1, single channel) slot |
Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB |
LAN | 2x RJ45 LAN ports |
USB | 2x USB rear ports |
VGA | 1x VGA Port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | 1 Fast UART 16550 serial port |
System Bios |
|
---|---|
Bios Type | 8Mb Flash EEPROM with Phoenix ® BIOS |
Bios Features | Plug and Play (PnP) |
Chassis |
|
---|---|
Form Factor | 1U Rackmount |
Model | CSE-813MTQ-520C |
Dimension and Weight |
|
---|---|
Height | 1.7" (43mm) |
Width | 17.2" (437mm) |
Depth | 19.8" (503mm) |
Weight | 31 lbs (14.1kg) |
Available Color | Beige, Black |
Front Panel |
|
---|---|
Buttons | Power On/Off button |
LEDs | Power LED Hard Drive Activity LED 2x Network activity LEDs System Overheat LED |
Expansion Slots |
|
---|---|
PCI-Express | 1 (x8) PCI-e slot |
Drive Bays |
|
---|---|
Hot Swap | 4x 3.5" Hot-swap SATA drive bays |
Peripheral Drives |
|
---|---|
DVD-ROM | Slim DVD-ROM drive |
SAS/SATA Backplane |
|
---|---|
1x SAS / SATA Backplane |
System Cooling |
|
---|---|
Fans | 4x 4cm 12,500 RPM fans |
Power Supply |
|
---|---|
520W AC to DC power supply w/ PFC | |
AC Voltage | 100 - 240V, 50 - 60Hz, 7 - 3Amp |
+5V | 20 Amp |
+5V standby | 3 Amp |
+12V | 39 Amp |
-12V | 0.5 Amp |
+3.3V | 16 Amp |
PC Health Monitoring |
|
---|---|
CPU | Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
FAN | Total of eight 4-pin fans 8x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Support for 3-pins (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x fan connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
LED | CPU / System Overheat LED Suspend-state Indicator LED |
Other Features | Chassis intrusion detection Chassis intrusion header Chipkill Support |
Operating Environment / Compliance |
|
---|---|
RoHS | RoHS Compliant 5/6, Server Exemption |
Environmental Spec. | Operating Temperature: 10° to 35°C (50° to 95°F)
|