Supermicro 1U Rackmount SuperServer SYS-6013P-8+
Key Features:
• Dual Intel® Xeon® Support up to 3.20 GHz
• Up to 12GB DDR 266/200 SDRAM
• 1 x 64-bit 133/100MHz Full-height, Full-length PCI-X Expansion Slot
• 1 x 64-bit 100MHz Low-profile PCI-X Expansion slot
• 2 x Intel® 82546EB Gigabit Ethernet Ports
• Zero Channel RAID Support
• 4 x 3.5" Ultra320 SCSI (w/ SAF-TE) Hot-swap Drive Bays
• 500W Power Supply
Supermicro SYS-6013P-8+ / SYS-6013P-8+B 1U Rackmount with 500W Power Supply,Intel® E7501 chipset, 4 x 3.5" hot-swap Ultra320/160 SCSI Drive Bays w/ SAF-TE, using Supermicro
Super X5DPR-8G2+ Motherboard and SC813S-500 Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-6013P-8+ | SuperServer 6013P-8+ (Beige) |
| SYS-6013P-8+B | SuperServer 6013P-8+B (Black) |
Motherboard |
|
|---|---|
| Super X5DPR-8G2+ | |
Processor/Cache |
|
|---|---|
| CPU | Dual mPGA604 ZIF Sockets |
| System Bus | 533MHz/400MHz system bus |
System Memory |
|
|---|---|
| Memory Capacity |
Six 184-pin DIMM sockets Supports up to 12 GB DDR266/200 memory Dual channel memory bus Memory must be populated in pairs |
| Memory Type | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 2.5 V only |
On-Board Devices |
|
|---|---|
| Chipset | Intel® E7501 chipset |
| SCSI | Adaptec AIC-7902 Controller |
| RAID | Support for Zero-Channel RAID w/ Supermicro Socket DIMM All-In-One ZCR Card AOC-SOZCR1 |
| IPMI | Support for Intelligent Platform Management Interface v.1.5 (Optional) |
| Network Controllers | Dual Port Intel® 82546EB Gigabit Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
Expansion Slots |
|
|---|---|
| 1x full-height, full-length 64-bit 133/100MHz PCI-X (3.3V) expansion slot (Riser card required) w/ VXB (Virtual Extended Bus) slot 1x low-profile slim 64-bit 100MHz PCI-X (3.3V) expansion slot (Riser card required) |
|
Input/Output |
|
|---|---|
| IDE | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| USB | 1 USB port |
| Serial Ports | 1 Fast UART 16550 serial ports |
| Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
System Bios |
|
|---|---|
| Bios Type | 8Mb Flash EEPROM with AMI® BIOS |
| Bios Features | Plug and Play (PnP)
|
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | SC813S-500 |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 25.6" (650mm) |
| Weight | 42 lbs (19.0 kg) |
| Available Color | Beige,Black |
Front Panel |
|
|---|---|
| Buttons | Power On/Off button |
| LEDs | Power LED Hard Drive Activity LED 2x Network activity LEDs System Overheat / Fan Fail LED |
| Ports | None |
Drive Bays |
|
|---|---|
| Hot-swap | 4 x 3.5" hot-swap Ultra320/160 SCSI Drive Bays w/ SAF-TE |
Peripheral Drives |
|
|---|---|
| Floppy | TEAC 3.5" 1.44MB Slim Floppy Drive |
| CD-ROM | TEAC Slim 24x CD-ROM drive |
SCSI Backplane |
|
|---|---|
| 1x SCA813S 1U SCSI Backplane w/ SAF-TE | |
System Cooling |
|
|---|---|
| Fans | 2x 10cm blower fans |
Power Supply |
|
|---|---|
| Cold-swappable 500W AC power supply module w/ PFC [ 20-pin, (8-pin=12V) ] | |
| AC Voltage | 100 - 240V, 60-50Hz, 10 Amp |
| DC Output | 5V + 3.3V ≤ 160W |
| +5V | 30.0 Amp |
| +5V stand by | 2.0 Amp |
| +12 | 39 Amp |
| -12V | 1.0 Amp |
| +3.3V | 21 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, 3.3V Standby |
| FAN | Total of three 3-pin fan headers 3x fans with tachometer monitoring Overheat backup fan connector Status monitor with firmware/software on/off control |
| Temperature | Monitoring for CPU, chassis, environment CPU thermal trip support |
| LED | CPU Overheat LED |
| Other Features | Chassis intrusion detection |