Supermicro 1U Rackmount SuperServer SYS-6012P-6
Key Features:
• Dual Intel® Xeon® Support up to 3.0 GHz
• Up to 8GB DDR 200 SDRAM
• 1 x 64-bit 133/100MHz Full-height, Full-length PCI-X Expansion Slot
• 1 x 64-bit 66MHz Low-profile PCI-X Expansion Slot
• 1 x Gigabit Ethernet, 1 x 10/100 Ethernet Ports
• Zero Channel RAID Support
• 3 x 3.5" Ultra160 SCSI Hot-Swap Drive Bays
• 400W Power Supply
Supermicro SYS-6012P-6 / SYS-6012P-6B 1U Rackmount with 400W Power Supply,Intel® E7500 chipset, 3 x 3.5" hot-swap Ultra320/160 SCSI Drive Bays w/ SAF-TE, using Supermicro
Super P4DPR-6GM+
Motherboard and SC812S-400 Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-6012P-6 | SuperServer 6012P-6 (Beige) |
| SYS-6012P-6B | SuperServer 6012P-6B (Black) |
Motherboard |
|
|---|---|
| Super P4DPR-6GM+ | |
Processor/Cache |
|
|---|---|
| CPU | Dual mPGA603 ZIF Sockets |
| System Bus | 400MHz system bus |
System Memory |
|
|---|---|
| Memory Capacity |
Four 184-pin DIMM 25° sockets Supports up to 8 GB DDR200 memory Dual channel memory bus Memory must be populated in pairs |
| Memory Type | DDR266/200 registered ECC SDRAM 72-bit, 184-pin gold-plated DIMMs |
On-Board Devices |
|
|---|---|
| Chipset | Intel® E7500 chipset |
| SCSI | Adaptec AIC-7899W Controller Dual-Channel Ultra160 SCSI |
| RAID | Support for Zero-Channel RAID w/ Adaptec 2005S ZCR Card (Card NOT included) |
| IPMI | Support for Intelligent Platform Management Interface v.1.5 (Optional) |
| Network Controllers | 1x Intel® 82544 Gigabit Ethernet 1x Intel® 82550 10/100 Ethernet Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
Expansion Slots |
|
|---|---|
| 1x full-height, full-length 64-bit 133/100MHz PCI-X expansion slot (Riser card required) w/ VXB (Virtual Extended Bus) slot 1x low-profile 64-bit 66MHz PCI-X expansion slot (Riser card required) |
|
Input/Output |
|
|---|---|
| IDE | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| USB | Up to 5 USB ports |
| Serial Ports | 2 Fast UART 16550 serial ports |
| Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
System Bios |
|
|---|---|
| Bios Type | 4Mb Flash EEPROM with Phoenix® BIOS |
| Bios Features | Plug and Play (PnP)
|
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | SC812S-400 |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 16.8" (426mm) |
| Depth | 25.6" (650mm) |
| Weight | 35 lbs (15.9 kg) |
| Available Color | Beige,Black |
Front Panel |
|
|---|---|
| Buttons | Power On/Off button |
| LEDs | Power LED Hard Drive Activity LED 2x Network activity LEDs System Overheat LED |
| Ports | 2x USB Ports (2.0 ready) 1x RJ45 COM Port |
Drive Bays |
|
|---|---|
| Hot-swap | 3 x 3.5" hot-swap Ultra320/160 SCSI Drive Bays w/ SAF-TE |
SCSI Backplane |
|
|---|---|
| 1x SCA812 1U SCSI Backplane w/ SAF-TE | |
System Cooling |
|
|---|---|
| Fans | 2x 10cm blower fans |
Power Supply |
|
|---|---|
| 400W AC power supply with PFC | |
| AC Voltage | 100 - 240V, 50/60Hz, 8 Amp |
| DC Output | 5V + 3.3V ≤ 200W |
| +5V | 30.0 amp |
| +5V stand by | 2.0 Amp |
| +12V | 26 Amp |
| -12V | 10 Amp |
| +3.3V | 30 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5, ±12V, 3.3V Standby |
| FAN | Total of seven 3-pin fan headers |
| Temperature | Monitoring for CPU, chassis, environment CPU thermal trip support |
| LED | CPU Overheat LED System Overheat LED Suspend-state indicator LED |
| Other Features | Chassis intrusion detection |