Supermicro 1U Rackmount SuperServer SYS-5018D-MTRF

Call for price

In stock

SKU

SYS-5018D-MTRF

Key Features:
• Single socket H3 (LGA 1150) supports Intel® Xeon® E3-1200 v3/v4, 4th gen. Core i3, Pentium, Celeron processors
• Intel® C224 Express PCH
• 4x 3.5" Hot-swap SATA3 HDDs
• 1x PCI-E 3.0 x16 Full-height slot
• Up to 32GB DDR3 ECC 1600MHz UDIMMs in 4 sockets
• Dual Gigabit Ethernet LAN ports (1x Intel® i217LM & 1x Intel® i210AT)
• IPMI 2.0 on Dedicated LAN port
• 400W Redundant Power Supplies Optional Battery Backup Power (BBP®)

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-5018D-MTRF

Supermicro SYS-5018D-MTRF 1U Rackmount Barebone with 400W Redundant Power Supplies, Intel® C224 Express PCH with 4x 3.5" Hot-swap SATA3 HDD bays using Supermicro
Super X10SLM-F Server Motherboard and CSE-813MTQ-R400CB 1U Rackmount Chassis.

Product SKU
SYS-5018D-MTRF	SuperServer 5018D-MTRF (Black)

Motherboard
	Super X10SLM-F

Processor/Cache
CPU	Intel® Xeon® processor E3-1200 v3/v4 family, 4th Gen Core i3, Pentium, Celeron processors Socket H3 (LGA 1150)

System Memory
Memory Capacity	4x 240-pin DDR3 DIMM slots Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type	1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes	8GB, 4GB, 2GB, 1GB
Memory Voltage	1.5 V
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset	Intel® C224 Express PCH
SATA	SATA3 (6Gbps) w/ RAID 0, 1, 10, 5 SATA2 (3Gbps) w/ RAID 0, 1
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC with 10/100/1000Mbps
Network Connectivity	Intel® i217LM + Intel® i210AT Controllers Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output 1x Realtek RTL8201N PHY (dedicated IPMI)
VGA	ASPEED AST2400 BMC

Input/Output
Serial ATA	4x SATA3 (6Gbps) ports 2x SATA2 (3Gbps) ports SATA DOM Power Connector
LAN	2x RJ45 LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	4x USB 3.0 ports (1 Type-A, 2+1 via header) 6x USB 2.0 ports (4 rear, 2 via header)
VGA	1x VGA port
Serial Port/Header	1x Fast UART 16550 serial port 1x internal header

PC Health Monitoring
Voltage	Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN	Total of five 4-pin fan headers supporting up to 5 fans 5x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	CPU / System Overheat LED +5V Standby alert LED
Other Feature	Chassis intrusion detection Chassis intrusion header

Chassis
Form Factor	1U Rackmount
Model	CSE-813MTQ-R400CB

Dimension and Weight
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	19.8" (503mm)
Gross Weight	30.4 lbs (13.8 kg)
Available Colors	Black

Front Panel
Buttons	Power On/Off button System Reset button
LED	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED
Ports	2x USB ports 1x Serial COM Port

Expansion Slots
PCI-Express	1x PCI-E 3.0 x8 (in x16) Full-height slot

Drive Bays
Hot-Swap	4x 3.5" Hot-swap SATA3 HDDs w/ RAID
Peripheral Bay	Slim optical drive (optional)

Backplane
	SAS2/SATA3 HDD Backplane (SAS support requires optional SAS controller)

System Cooling
Fans	4x 4cm 12,500 RPM PWM fans Optional fans to cool add-on cards
Shroud	1x Air Shroud

Power Supply
	400W Redundant Power Supplies w/Power Distributor, PMBus 1.2, I2C, and PFC
AC Input	100-240V, 50-60Hz, 6-3A
DC Output	+5V standby: 3A +12V: 33A
With Power Distributor	+5V: 25A +3.3V: 25A -12V: 0.6A

System Bios
Bios Type	128Mb SPI Flash EEPROM with AMI BIOS
Bios Features	DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3

Management
Software	IPMI (Intelligent Platform Management Interface) v2.0 with KVM support SuperDoctor® III Watch Dog NMI
Power Configuration	ACPI / ACPM Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 10Â°C to 35Â°C (50Â°F to 95Â°F) Non-operating Temperature: -40Â°C to 70Â°C (-40Â°F to 158Â°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)