Supermicro 1U Rackmount SuperServer SYS-5017GR-TF
Key Features:
• Single socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 familyâ€
• Up to 512GB ECC DDR3, up to 1866MHz; 8x DIMM slots
• 2x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards) 1x PCI-E 3.0 x8 low-profile slot
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Intel® i350 Dual-Port GbE Controller
• 3x 3.5" Hot-swap Drive Bays
• 1400W High-efficiency Power Supply Platinum Level (94%+) Digital Switching Control & PMBus 1.2
• 8x Counter rotating fans w/ optimal fan speed control
• Smart server management tools
Server Motherboard and CSE-818G-1K43B 1U Rackmount Chassis.
Product SKU |
|
|---|---|
| SYS-5017GR-TF | SuperServer 5017GR-TF (Black) |
Motherboard |
|
|---|---|
| Super X9SRG-F | |
Processor/Cache |
|
|---|---|
| CPU | Single Socket R (LGA 2011) ntel® Xeon® processor E5-2600 and E5-2600 v2 family†(up to 12 cores and up to 130W) |
| Cache | Up to 30MB |
| System Bus | QPI up to 8 GT/s |
| GPU/Xeon Support | M2075/M2090, up to 130W CPU at 35°C K10/K20/K20X (Kepler), up to 130W CPU at 35°C |
System Memory |
|
|---|---|
| Memory Capacity |
8x 240-pin DDR3 DIMM slots Up to 512GB DDR3 ECC LRDIMM Up to 256GB DDR3 ECC Registered memory (RDIMM) |
| Memory Type | 1866/1600/1333/1066MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | 1.5 V, 1.35 V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices |
|
|---|---|
| Chipset | Intel® C602 Chipset |
| SATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Connectivity | Intel® i350 Dual Port Gigabit Ethernet |
| Graphics | Matrox G200eW 16MB DDR2 graphics |
| Super I/O | Nuvoton W83527 |
Input/Output |
|
|---|---|
| SATA | 2 SATA 3.0 ports (6Gbps) 4 SATA 2.0 ports (3Gbps) |
| LAN |
2 RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
| USB | 6 USB 2.0 ports total (2 rear + 4 via headers) |
| Video | 1 VGA Connector |
| Keyboard/Mouse | PS/2 keyboard and mouse ports |
| Serial Port/Header | 1 Serial header |
| DOM | 1 DOM (Disk on Module) power connector |
System Bios |
|
|---|---|
| Bios Type | 64Mb SPI Flash EEPROM with AMI® BIOS |
| Bios Features |
Plug and Play (PnP) |
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | CSE-818G-1K43B |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 28.2" (716mm) |
| Gross Weight | 41.4 lbs (18.8 kg) |
| Available Colors | Black |
Front Panel |
|
|---|---|
| Buttons |
Power On/Off button System Reset button |
| LED | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED |
Expansion Slots |
|
|---|---|
| PCI-Express |
2x PCI-E 3.0 x16 slots
(support GPU/Xeon Phi cards) |
Drive Bays |
|
|---|---|
| Hot-Swap | 3x 3.5" Hot-swap drive bays |
System Cooling |
|
|---|---|
| Fans | 8x counter-rotating fans with optimal fan speed control |
Power Supply |
|
|---|---|
| 1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2 | |
| AC Voltage | 1200W: 100-140 V, 14.7-10.5A, 50-60 Hz 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz |
| +5V standby | 6 Amp |
| +12V | 100 Amp/115 Vac 117 Amp/230 Vac |
| With Power Distributor | +5V: 14 Amp |
| Certification | Platinum Certified |
PC Health Monitoring |
|
|---|---|
| CPU |
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 5-Phase-switching voltage regulator |
| FAN | Total of eight 4-pin PWM fans 8x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
| LED | Power Fail / Overheat LED Suspend-state Indicator LED UID LED |
| Other Featues | SDDC Support |
Operating Environment / Compliance |
|
|---|---|
| RoHS | RoHS Compliant |
| Environmental Spec. |
Operating Temperature:
10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |