Supermicro 1U Rackmount SuperServer SYS-5015M-MTB
Key Features:
• Intel® Pentium® D, Pentium® 4 Extreme Edition, Pentium 4, Pentium Extreme
Edition & Celeron D in LGA775 Package(FSB 1066/800/533)
• Up to 8GB unbuffered, ECC DDR2 667/533 SDRAM
• 1 (x8) PCI-Express (optional) OR
1x 64-bit 133MHz PCI-X Slot
• 2x Intel® 82573V (Tekoa) PCI-e Gigabit LAN Ports
• ATI RageXL Graphics
• 4x 3.5" Hot-swap SATA Drive Bays
• 300W Power Supply
Supermicro SYS-5015M-MT / SYS-5015M-MTB 1U Rackmount with Intel E7230 (Mukilteo) Smithfield chipset, 4x 3.5" SATA Hot-swap drive bays, using Super PDSMi and
SC813MFT-300C Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-5015M-MT | SuperServer 5015M-MT (Beige) |
| SYS-5015M-MTB | SuperServer 5015M-MTB (Black) |
Motherboard |
|
|---|---|
| Super PDSMP-i | |
Processor/Cache |
|
|---|---|
| CPU | Single LGA775 ZIF Socket |
| System Bus | 1066 / 800 / 533 MHz system bus |
System Memory |
|
|---|---|
| Memory Capacity |
Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered, ECC DDR2 667/533/400MHz memory (Single / Dual Channel) |
| Memory Type | DDR2 667/533/400MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2GB |
| Memory Voltage | 1.8V only |
On-Board Devices |
|
|---|---|
| Chipset | Intel E7230 (Mukilteo) Smithfield chipset ICH7R + PXH-V + Intel® 82573V |
| Serial ATA | Intel® ICH7R SATA controller built-in RAID 0, 1, 5, 10 |
| IPMI | 1U support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E ) |
| Network Controllers | Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa) Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output |
| VGA | On-board ATI RageXL graphics, 8MB |
| Super I/O | Winbond 83627EHF chip |
| Clock Generator | CK410 |
Expansion Slot |
|
|---|---|
| PCI-Express / PCI-X |
1x Universal (SXB-E) Slot for Riser (x1)
[ 1x 64-bit PCI-X 133MHz Slot ] OR [ 1 (x8) PCI-Express Slot ] (Optional) |
Input/Output |
|
|---|---|
| Serial ATA | Four Serial ATA ports (3 Gbps performance) Four SATA hard drives supported |
| IDE | One EIDE channel supports up to two UDMA IDE devices IDE Master / Slave 2 ports Supports UDMA Mode 5, PIO Mode 4, and ATA/100 White Connector for Compact Flash (CF) card only |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN port |
| USB | 4x internal USB headers 2x rear ports |
| VGA | 1x VGA port |
| Keyboard/Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 1x ECP / EEP Parallel Header
|
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | SC813MFT-300C |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 19.8" (503mm) |
| Weight | 38 lbs (17.2kg) |
| Available Color | Black, Beige |
Front Panel |
|
|---|---|
| Buttons | Power On/Off button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED |
| Ports | 2x Front USB Ports 1x Serial COM Port |
Drive Bays |
|
|---|---|
| Hot swap | 4x 3.5" SATA Hot-swap drive bays |
System Cooling |
|
|---|---|
| Fans | 3x Counter-rotating Cooling Fans |
Power Supply |
|
|---|---|
| Fixed 300W AC power supply module with PFC [ 24-pin, (4-pin=12V), 4-pin HDD ] | |
| AC Voltage | 100 - 240V, 60-50Hz, 5 Amp |
| DC Output | 5V + 3.3V ≤ 100W |
| +5V | 25 Amp |
| +5V stand by | 2.0 Amp |
| +12V | 24.0 Amp (Max) |
| -12V | 1.0 Amp |
| +3.3V | 15.0 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT) |
| FAN | Fan Speed Control Fans with tachometer monitoring Status monitor with firmware speed control Low noise fan speed control Status monitor for on/off control Support 3-pin fans (without speed control) Pulse Width Modulated (PWM) fan connector |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support |
| LED | +5V Standby Alert LED Suspend-state indicator LED |
| Other Features | Chassis Intrusion Header |
System Bios |
|
|---|---|
| Bios Type | 8Mb Flash EEPROM with Phoenix® BIOS |
| Bios Features | Plug and Play (PnP) |