Supermicro 1U Rackmount SuperServer SYS-5015M-MT+
Key Features:
• Xeon® 3000 Series (Conroe) in LGA775 Package (FSB 1066/800/533)
• Up to 8GB unbuffered ECC / non-ECC DDR2 667/533MHz SDRAM
• 1 (x8) PCI-Express or
1x 64-bit 133MHz PCI-X,
1x 32-bit 33MHz PCI
• 1x Intel® 82573L PCI-e Gigabit LAN
1x Intel® 82573V PCI-e Gigabit LAN
• On board ATI ES1000 Graphics
• 4x 3.5" Hot-swap SATA Drive Bays
• 300W Power Supply
Supermicro SYS-5015M-NTRV / SYS-5015M-NTRB 1U Rackmount with Intel 3010 (Mukilteo-2P) chipset, 4x 3.5" Hot-swap drive bays, using Super PDSMU and SC815TQ-R450UV
Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-5015M-NTRV | SuperServer 5015M-NTRV (Silver) |
| SYS-5015M-NTRB | SuperServer 5015M-NTRB (Black) |
Motherboard |
|
|---|---|
| Super PDSMU | |
Processor/Cache |
|
|---|---|
| CPU | Single LGA775 ZIF Socket |
| System Bus | 1066 / 800 / 533 MHz system bus |
System Memory |
|
|---|---|
| Memory Capacity |
Four 240-pin DIMM sockets Supports up to 8 GB of memory (Single / Dual Channel) |
| Memory Type | DDR2 667/533MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.8V only |
On-Board Devices |
|
|---|---|
| Chipset | Intel 3000 (Mukilteo-2) chipset |
| Serial ATA | Intel® ICH7R SATA controller built-in RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support SIMSO Slot - Supermicro Intelligement Management (Optional: AOC-SIMSO+) |
| Network Controllers | 1x Intel® 82573V Gigabit PCI-Express Ethernet 1x Intel® 82573L Gigabit PCI-Express Ethernet Supports 10Base-T, 100Base-TX, 1000BASE-T, RJ45 output |
| VGA | On-board ATI ES1000 (16MB) graphics |
| Super I/O | Winbond 83627HG chip |
| Clock Generator | CK410 |
Expansion Slots |
|
|---|---|
| Universal Slot |
1 (x8) PCI-Express Slot (via Riser Card) Or 1x 64-bit PCI-X 133MHz Slot (via Riser Card) |
Input/Output |
|
|---|---|
| Serial ATA | Four Serial ATA ports (3 Gbps performance) Four SATA hard drives supported |
| IDE | One EIDE channel supports up to two UDMA IDE devices IDE Master / Slave 2 ports Supports UDMA Mode 5, PIO Mode 4, and ATA/100 White Connector for Compact Flash (CF, 40-pin IDE connector) card only |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | Up to 6x USB 2.0 / 1.1 compliant ports 2 rear ports 2x Rear USB ports |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port | 1x Fast UART 16550 serial port |
| Parallel Port | 1x ECP / EEP Parallel Header |
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | SC813MT-300C |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 19.8" (503mm) |
| Weight | 38 lbs (17.2kg) |
| Available Color | Silver,Black |
Front Panel |
|
|---|---|
| Buttons | Power On/Off button |
| LEDs | Power Status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
| Ports | 2x Front USB Ports 1x Serial COM Port |
Drive Bays |
|
|---|---|
| Hot-swap | 4x 3.5" SATA Hot-swap drive bays |
System Cooling |
|
|---|---|
| Fans | 3x Cooling Fans |
Power Supply |
|
|---|---|
| Fixed 300W AC power supply module with PFC [ 24-pin, (4-pin=12V), 4-pin HDD ] | |
| AC Voltage | 100 - 240V, 60-50Hz, 5 Amp |
| DC Output | 5V + 3.3V ≤ 100W |
| +5V | 25 Amp |
| +5V stand by | 2.0 Amp |
| +12V | 24.0 Amp (Max) |
| -12V | 1.0 |
| +3.3V | 15.0 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT) CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V Adjustable CPU clock frequency ratio |
| FAN | Fan Speed Control Total of six 4-pin fan headers 6x fans with tachometer monitoring Status monitor with firmware speed control Support 3-pin fans (with speed control) Low noise fan speed control Status monitor for on/off control Support 3-pin fans (without speed control) Pulse Width Modulated (PWM) fan connector |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor (TM2) Support PECI |
| LED | CPU / System Overheat LED Standby alert LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
System Bios |
|
|---|---|
| Bios Type | 8Mb Flash EEPROM with Phoenix BIOS® |
| Bios Features. | Plug and Play (PnP)
|