Supermicro 1U Rackmount SuperServer SYS-5015M-MF
Key Features:
• Intel® Pentium® D, Pentium® 4 Extreme Edition, Pentium 4, Pentium Extreme
Edition & Celeron D in LGA775 Package(FSB 1066/800/533)
• Up to 8GB unbuffered, ECC DDR2 667/533 SDRAM
• 1 (x8) PCI-Express (optional) OR
1x 64-bit 133MHz PCI-X Slot
• 2x Intel® 82573V (Tekoa) PCI-E Gigabit LAN Ports
• ATI RageXL Graphics
• 1x 3.5" Internal Drive Bay
• 260W Power Supply
Supermicro SYS-5015M-MF / SYS-5015M-MFB 1U Rackmount with Intel E7230 (Mukilteo) Smithfield chipset, 1x 3.5" internal drive bay, using Super PDSMi+ and SC513F-260B (For SuperServer
Only) Rackmount Chassis
Product SKU |
|
---|---|
SYS-5015M-MF | SuperServer 5015M-MF (Black) |
SYS-5015M-MFB | SuperServer 5015M-MFB (Black) |
Motherboard |
|
---|---|
Super PDSMi |
Processor/Cache |
|
---|---|
CPU | Single LGA775 ZIF Socket |
System Bus | 1066 / 800 / 533 MHz system bus |
System Memory |
|
---|---|
Memory Capacity |
Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered, ECC DDR2 667/533MHz memory (Dual Channel) |
Memory Type | DDR2 667/533MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2GB |
Memory Voltage | 1.8V only |
On-Board Devices |
|
---|---|
Chipset | Intel E7230 (Mukilteo) Smithfield chipset ICH7R + PXH-V + Intel® 82573V |
Serial ATA | Intel® ICH7R SATA controller built-in RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 (Optional: AOC-IPMI20-E) |
Network Controllers | Dual-port Intel® 82573V Gigabit PCI-Express Ethernet (Tekoa) Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output |
VGA | On-board ATI RageXL graphics, 8MB |
Super I/O | Winbond 83627EHF chip |
Clock Generator | CK410 |
Expansion Slot |
|
---|---|
Universal Slot |
1x Universal (SXB-E) Slot for Riser (x1)
[ 1x 64-bit PCI-X 133MHz Slot ] OR [ 1 (x8) PCI-Express Slot ] (Optional) 1x 32-bit 33MHz PCI (5V) slot |
Input/Output |
|
---|---|
Serial ATA | Four Serial ATA ports (3 Gbps performance) Four SATA hard drives supported |
IDE | One EIDE channel supports up to two UDMA IDE devices IDE Master / Slave 2 ports Supports UDMA Mode 5, PIO Mode 4, and ATA/100 White Connector for Compact Flash (CF) card only |
Floppy | 1 Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | USB 2.0 compliant / 1.1 compatible 2x front USB ports 2x rear ports |
VGA | 1x VGA Port |
Keyboard/Mouse | PS/2 keyboard and mouse ports |
Serial Ports | 1x Fast UART 16550 serial port |
Parallel Port | 1x ECP / EEP Parallel Header
|
Chassis |
|
---|---|
Form Factor | 1U Rackmount |
Model | SC513F-260B (For Super Server Only) |
Dimension and Weight |
|
---|---|
Height | 1.7" (43mm) |
Width | 16.8" (426mm) |
Depth | 14" (356mm) |
Weight | 17 lbs (7.7kg) |
Available Color | Black |
Front Panel |
|
---|---|
Buttons | Power On/Off button |
LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED |
Ports | 2x USB Ports (2.0 Ready) |
Drive Bays |
|
---|---|
Internal Bay | 1x 3.5" internal drive bay |
System Cooling |
|
---|---|
Fans | 2x 16cm 3-pin Nidec Counter-rotating Fans |
Power Supply |
|
---|---|
Thermal control 260W AC power supply with PFC [ 24-pin, (4-pin=12V) ] | |
AC Voltage | 100 - 240V, 60-50Hz, 5-3 Amp |
DC Output | 5V + 3.3V ≤ 140W |
+5V | 25.0 amp |
+5V stand by | 2.0 amp |
+12V | 18.0 Amp |
-12V | 1.0 Amp |
+3.3V | 15.0 Amp |
PC Health Monitoring |
|
---|---|
CPU | Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +3.3V/+5V Standby, VBAT) |
FAN | Fan Speed Control Total of five proprietary fan headers 5 fans with tachometer monitoring Status monitor with firmware speed control Low noise fan speed control Status monitor for on/off control Support 3-pin fans (without speed control) Pulse Width Modulated (PWM) fan connector |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support |
LED | +5V Standby Alert LED Suspend-state indicator LED |
Other Features | Chassis Intrusion Header |
System Bios |
|
---|---|
Bios Type | 8Mb Flash EEPROM with Phoenix® BIOS |
Bios Features | Plug and Play (PnP)
|