Supermicro 1U Rackmount SuperServer SYS-5015B-NTB
Key Features:
• Intel® Xeon® 3000 Sequence and Coreâ„¢ 2 Extreme / Quad / Duo Series in
LGA775 Package (FSB 1600/1333/1066/800 MHz)
• Up to 8GB unbuffered non-ECC DDR3 1333/1066/800 SDRAM or up to
4 GB Non-ECC 1600MHz XMP DDR3 memory
• Left Slot (Full-height / Full-length): 2 (x8) PCI-Express
• Right Slot (Low-Profile): 1 (x4) PCI-Express (in x8 Slot)
•Intel® 82573V + Intel® 82573L PCI-e Gigabit Controllers
• On board ATI ES1000 Graphics
• 4x 3.5" Hot-swap Drive Bays For customizable Storage
• 560W High-efficiency Power Supply
Supermicro SYS-5015B-NTB 1U Rackmount with Intel® X48 chipset, 4x 3.5" Hot-swap drive bays, using Super X7SBU and CSE-815TQ-560UB Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-5015B-NTB | SuperServer 5015B-NTB (Black) |
Motherboard |
|
|---|---|
| Super X7SBU | |
Processor/Cache |
|
|---|---|
| CPU | Single LGA775 ZIF Socket |
| System Bus | 1600 / 1333 / 1066 / 800 MHz system bus |
System Memory |
|
|---|---|
| Memory Capacity |
Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600MHz XMP DDR3 memory |
| Memory Type | DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600MHz XMP DDR3 memory |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | Dynamic (1.5V to 1.9V) |
On-Board Devices |
|
|---|---|
| Chipset | Intel X48 chipset |
| Serial ATA | Intel® ICH9R SB SATA controller built-in (3 Gbps) RAID 0, 1, 5, 10 (Windows) RAID 0, 1, 10 (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support SIMSO Slot - Supermicro Intelligement Management (Optional: AOC-SIMSO-HTC, AOC-SIMSO+) NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function |
| Network Controllers | 2x Single-port Gigabit PCI-Express Ethernet Controllers Intel® 82573V + Intel® 82573L Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output |
| VGA | On-board ATI ES1000 (32MB) graphics |
| Super I/O | Winbond 83627HG chip |
| Clock Generator | IDTCV183-1 |
Input/Output |
|
|---|---|
| Serial ATA | Six Serial ATA ports (3 Gbps performance) Six SATA hard drives supported External SATA supported |
| IDE | One EIDE channel supports up to two UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | Up to 8x USB 2.0 / 1.1 compliant ports 2 rear ports + 2 Type A connectors + 2 internal headers (4 ports) |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 2x Fast UART 16550 serial port |
System Bios |
|
|---|---|
| Bios Type | 16Mb Flash EEPROM with SPI BIOS |
| Bios Features |
Plug and Play (PnP) |
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | CSE-815TQ-560UB |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 25.6" (650mm) |
| Weight | 40 lbs (18.1kg) |
| Available Color | Black |
Front Panel |
|
|---|---|
| Buttons | Power On/Off button |
| LEDs | Power Status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED UID LED |
| Ports | 2x USB & DB9 COM port tray (Optional - in place of floppy drive) |
Drive Bays |
|
|---|---|
| Hot-swap | 4x 3.5" Hot-swap drive bays |
System Cooling |
|
|---|---|
| Fans | 4x Counter-rotating Fans |
Power Supply |
|
|---|---|
| 560W AC power supply w/ PFC (20-pin) | |
| AC Voltage | 100 - 240V, 50 - 60Hz, 8.5 - 4Amp |
| +5V | 25 Amp |
| +5V stand by | 3 Amp |
| +12V | 43.6 Amp |
| -12V | 0.6 Amp |
| +3.3V | 21 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset) CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V |
| FAN | Total of six 4-pin fan headers 6x fans with tachometer monitoring Status monitor with firmware / software speed control Support 3-pin fans (without speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connector |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support PSU I2C temperature sensing logic Thermal Monitor (TM2) Support PECI |
| LED | CPU / System Overheat LED Suspend-state indicator LED +5 Standby power alert LED UID / Remote UID |
| Other Features | Chassis intrusion detection Chassis intrusion header |
Operating Environment / Compliance |
|
|---|---|
| RoHS | RoHS Compliant 5/6, Server Exemption |
| Environmental Spec. | Operating Temperature:
10°C to 40°C (50°F to 104°F)
|