Supermicro 1U Rackmount SuperServer SYS-5015B-MT
Key Features:
• Intel® Xeon® 3200 Series, Xeon® 3000 Series in LGA775 Package
(FSB 1333/1066/800)
• Up to 8GB unbuffered ECC unbuffered DDR2 800/667 SDRAM
• 1 Universal (x8) PCI-Express OR 1 64 bit PCI-X 133MHz Slot
• Intel® 82573V + Intel® 82573L PCI-e Gigabit Controllers
• On board ATI ES1000 32MB Graphics
• 4x 3.5" Hot-swap SATA Drive Bays
• 300W Power Supply
Supermicro SYS-5015B-MT / SYS-5015B-MTB 1U Rackmount with Intel® 3210 chipset, 4x 3.5" SATA Hot-swap drive bays, using Super X7SBi and SC813MTQ-300C (Chassis not
sold separately) Rackmount Chassis
Product SKU |
|
---|---|
SYS-5015B-MTB | SuperServer 5015B-MTB (Black) |
SYS-5015B-MT | SuperServer 5015B-MT (Beige) |
Motherboard |
|
---|---|
Super X7SBi |
Processor/Cache |
|
---|---|
CPU | Single LGA775 ZIF Socket |
System Bus | 1333 / 1066 / 800 MHz system bus |
System Memory |
|
---|---|
Memory Capacity |
Four 240-pin DIMM sockets Supports up to 8 GB of memory (Dual Channel) |
Memory Type | DDR2 800/667 MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs |
DIMM Sizes | 256 MB, 512 MB, 1 GB, 2GB, 4GB |
Memory Voltage | 1.8V only |
On-Board Devices |
|
---|---|
Chipset | Intel 3210 chipset |
Serial ATA | Intel® ICH9R SATA2 (3 Gbps) controller built-in RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
IPMI | Support for Intelligent Platform Management Interface v.2.0 NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function |
Network Controllers | 2x Single-port Gigabit PCI-Express Ethernet Controllers Intel® 82573V + Intel® 82573L Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output |
VGA | On-board ATI ES1000 (32MB) graphics |
Super I/O | Winbond 83627DHG chip |
Clock Generator | CK505 |
Expansion Slots |
|
---|---|
PCI-Express | 1 Universal (x8) PCI-e slot (OR) |
PCI-X | 1 64 bit PCI-X 133 Mhz slot |
Input/Output |
|
---|---|
Serial ATA | Six Serial ATA ports (3 Gbps performance) Four SATA hard drives supported External SATA supported |
IDE | One EIDE channel supports up to two UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
Floppy | 1 Floppy controller; 1.44 MB |
LAN | 2x RJ45 LAN ports |
USB | Up to 8x USB 2.0 / 1.1 compliant ports 2 rear ports 4 internal headers + 2 on-board |
VGA | 1x VGA port |
Keyboard / Mouse | PS/2 keyboard and mouse ports |
Serial Port / Header | 1x Fast UART 16550 serial port |
Parallel Port | 1x ECP / EEP Parallel Port |
System Bios |
|
---|---|
Bios Type | 8MB Flash EEPROM with Phoenix BIOS® |
Bios Features |
Plug and Play (PnP) |
Chassis |
|
---|---|
Form Factor | 1U Rackmount |
Model | SC813MTQ-300C (Chassis not sold separately) |
Dimension and Weight |
|
---|---|
Height | 1.7" (43mm) |
Width | 17.2" (437mm) |
Depth | 19.8" (503mm) |
Weight | 38 lbs (17.2kg) |
Available Color | Black |
Front Panel |
|
---|---|
Buttons | Power On/Off button |
LEDs | Power Status LED Hard drive activity LED 2x Network activity LEDs System Overheat / Fan Fail LED |
Ports | 2x Front USB Ports 1x Serial COM Port |
Drive Bays |
|
---|---|
Hot-swap | 4x 3.5" SATA Hot-swap drive bays |
System Cooling |
|
---|---|
Fans | 3x Cooling Fans |
Power Supply |
|
---|---|
Fixed 300W AC power supply module with PFC [ 24-pin, (4-pin=12V), 4-pin HDD ] | |
AC Voltage | 100 - 240V, 50 - 60Hz, 5Amp |
DC Output | 5V + 3.3V ≤ 100W |
+5V | 25 Amp |
+5V standby | 2.0 Amp |
+12V | 24.0 Amp (Max) |
-12V | 1.0 Amp |
+3.3V | 15 Amp |
PC Health Monitoring |
|
---|---|
CPU | Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset) CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V Adjustable CPU clock frequency ratio |
FAN | Total of six 4-pin fan headers 6x fans with tachometer monitoring Status monitor with firmware / software speed control Status monitor for on/off control Support 3-pin fans (without speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor (TM2) Support PECI |
LED | CPU / System Overheat LED +5V Standby alert LED |
Other Features | Chassis intrusion detection Chassis intrusion header |
Operating Environment / Compliance |
|
---|---|
RoHS | RoHS Compliant 5/6 |
Environmental Spec. | Operating Temperature:
10°C to 40°C (50°F to 104°F)
|