Supermicro 1U Rackmount SuperServer SYS-5015B-MRB
Key Features:
• Intel® Xeon® 3200 Series, Xeon® 3000 Series in LGA775 Package
(FSB 1333/1066/800)
• Up to 8GB unbuffered ECC unbuffered DDR2 800/667 SDRAM
• 1 Universal (x8) PCI-Express or 164 bit PCI-X 133 MHz slot
• Intel® 82573V + Intel® 82573L PCI-e Gigabit Controllers
• On board ATI ES1000 32MB Graphics
• 1x 3.5" Internal Drive Bay
• 200W High-Efficiency Power Supply
Supermicro SYS-5015B-MRB 1U Rackmount with Intel® 3210 chipset, 1x 3.5" Internal Drive Bay, using Super X7SBi and SC512-200B Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-5015B-MRB | SuperServer 5015B-MRB (Black) |
Motherboard |
|
|---|---|
| Super X7SBi | |
Processor/Cache |
|
|---|---|
| CPU | Single LGA775 ZIF Socket |
| System Bus | 1333 / 1066 / 800 MHz system bus |
System Memory |
|
|---|---|
| Memory Capacity |
Four 240-pin DIMM sockets Supports up to 8 GB of memory (Dual Channel) |
| Memory Type | DDR2 800/667 MHz unbuffered, ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2GB, 4GB |
| Memory Voltage | 1.8V only |
On-Board Devices |
|
|---|---|
| Chipset | Intel 3210 chipset |
| Serial ATA | Intel® ICH9R SATA2 (3 Gbps) controller built-in RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function |
| Network Controllers | 2x Single-port Gigabit PCI-Express Ethernet Controllers Intel® 82573V + Intel® 82573L Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output |
| VGA | On-board ATI ES1000 (32MB) graphics |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
Expansion Slots |
|
|---|---|
| PCI-Express/
PCI-X |
1 Universal (x8) PCI-E or 1 64 bit PCI-X 133 MHz slot |
Input/Output |
|
|---|---|
| Serial ATA | Six Serial ATA ports (3 Gbps performance) Six SATA hard drives supported External SATA supported |
| IDE | One EIDE channel supports up to two UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN ports |
| USB | Up to 8x USB 2.0 / 1.1 compliant ports 2 rear ports 4 internal headers + 2 on-board |
| VGA | 1x VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1x Fast UART 16550 serial port |
| Parallel Port | 1x ECP / EEP Parallel Port |
System Bios |
|
|---|---|
| Bios Type | 16Mb Flash EEPROM with Phoenix BIOS® |
| Bios Features |
Plug and Play (PnP)
|
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | SC512-200B |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 16.8" (426.7mm) |
| Depth | 14" (356mm) |
| Weight | 17 lbs (7.7kg) |
| Available Color | Black |
Front Panel |
|
|---|---|
| Buttons | Power On/Off button |
| LEDs | Power Status LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
| Ports | 2x USB Ports (2.0 Ready) |
Drive Bays |
|
|---|---|
| Internal | 1x 3.5" internal SATA drive bay |
System Cooling |
|
|---|---|
| Fans | 1x 100mm blower fan |
Power Supply |
|
|---|---|
| 200W Low Noise High-Efficiency AC-DC power supply w/ PFC | |
| AC Voltage | 100 - 240V, 50-60Hz, 4-2 Amp Max |
| +5V | 8.0 Amp |
| +5V standby | 2.0 Amp |
| +12V | 16.0 Amp |
| -12V | 0.5 Amp |
| +3.3V | 8.0 Amp |
| Certification | Certified |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset) CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V Adjustable CPU clock frequency ratio |
| FAN | Total of six 4-pin fan headers 6x fans with tachometer monitoring Status monitor with firmware / software speed control Status monitor for on/off control Support 3-pin fans (without speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor (TM2) Support PECI |
| LED | CPU / System Overheat LED +5V Standby alert LED |
| Other Features | Chassis intrusion detection Chassis intrusion header |
Operating Environment / Compliance |
|
|---|---|
| RoHS | RoHS Compliant 6/6, Pb Free |
| Environmental Spec. | Operating Temperature:
10°C to 40°C (50°F to 104°F)
|