Supermicro 1U Rackmount SuperServer SYS-5015A-EHF
Call for price
In stock
SKU
SYS-5015A-EHF
Key Features:
• Intel® Atomâ„¢ D510 (DMI)
• Up to 4GB single channel unbuffered, non-ECC DDR2 667MHz SO-DIMM
• 2x Intel 82574L Gigabit LAN
• 1 PCI-E 2.0 x4 (in x16 slot)
• Onboard Matrox G200eW video
• 1x 3.5" or Up to 2x 2.5" Internal Drives
• 200W Power Supply
• Intel® Atomâ„¢ D510 (DMI)
• Up to 4GB single channel unbuffered, non-ECC DDR2 667MHz SO-DIMM
• 2x Intel 82574L Gigabit LAN
• 1 PCI-E 2.0 x4 (in x16 slot)
• Onboard Matrox G200eW video
• 1x 3.5" or Up to 2x 2.5" Internal Drives
• 200W Power Supply
Supermicro SYS-5015A-EHF 1U Rackmount
Supermicro SYS-5015A-EHF 1U Rackmount supports Intel® Atomâ„¢ D510 processor, and 1x 3.5" Internal Drive Bay (Standard)
Product Skus | |
|---|---|
| SYS-5015A-EHF | SuperServer 5015A-EHF (Black) |
Motherboard | |
|---|---|
| Super X7SPE-HF | |
Processor / Cache |
|
|---|---|
| CPU | Intel® Atomâ„¢ D510 processor |
| System Bus | DMI |
System Memory |
|
|---|---|
| Memory Capacity | Two 200-pin SO-DIMM sockets Supports up to 4 GB of unbuffered, non-ECC DDR2 667MHz SO-DIMM (Single Channel) |
| Memory Type | DDR2 667MHz unbuffered, non-ECC SO-DIMM |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2GB |
| Memory Voltage | 1.8V only |
On-Board Devices |
|
|---|---|
| Chipset | Intel ICH9R Intel 82574L |
| SATA | Intel ICH9R SATA 3.0Gbps Controller |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Nuvoton WPCM450 BMC |
| Network Controllers | 2x Intel 82574L Gigabit Ethernet Supports 10BASE-T, 100/1000BASE-TX, RJ45 output |
| Graphics | Onboard Matrox G200eW video |
| Super I/O | Winbond 83627DHG chip |
Input / Output |
|
|---|---|
| Serial ATA | 6 Serial ATA ports ( 3Gbps ) |
| LAN | 2x RJ45 LAN port |
| USB | 8x USB 2.0 / 1.1 compatible 2 rear + 3 headers (5 ports) + 1 Type A connector |
| VGA | D-Sub 15 |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 1x Fast UART 16550 serial port 3x Serial Header |
System Bios |
|
|---|---|
| BIOS Type | 8Mb Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 / 3.0 USB Keyboard support SMBIOS 2.3 |
Drive Bays |
|
|---|---|
| Internal Bay | 1x 3.5" Internal Drive Bay (Standard) OR 2x 2.5" Internal Drive (Optional) OR 1x 2.5" Internal Drive (Optional) |
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | CSE-502L-200B |
Dimensions |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 9.8" (249mm) |
| Gross Weight | 10 lbs (4.5kg) |
| Colors | Black |
Front Panel |
|
|---|---|
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED |
| I/O Ports | Standard System I/O (Mouse, Keyboard, 2x USB Video, COM, LPT, LAN) |
Expansion Slot |
|
|---|---|
| PCI-Express | 1 (x4) PCI-e 2.0 slot (in x16 slot) |
Power Supply |
|
|---|---|
| 200W Low Noise AC-DC power supply with PFC | |
| AC Voltage | 100 - 240V, 50-60Hz, 3-1.5 Amp Max |
| +5V | 16.0 Amp |
| +5V standby | 2.0 Amp |
| +12V | 15.0 Amp |
| -12V | 0.8 Amp |
| +3.3V | 17.0 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory, Chipset CPU Core 1-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V |
| FAN | Total of four 4-pin fan headers 4 x fans with tachometer monitoring Status monitor for speed control Status monitor for on / off control Support 3-pin fans (without speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan conn. |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 4 x Fan Connectors I2C temperature sensing logic Thermal Monitor 2 (TM2) Support |
| LED | CPU / System Overheat LED |
| Other Features | Chassis intrusion Detection Chassis intrusion Header SDDC Support |
Operating Environment |
|
|---|---|
| Environmental Spec. | Operating Temperature: 0°to 50°C Non-operating Temperature: -40°to 70°C Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5 to 95% (non-condensing) |