Supermicro 1U Rackmount SuperServer SYS-1027GR-TRT2

Call for price
In stock
SKU
SYS-1027GR-TRT2
Key Features:
• Dual socket R (LGA 2011) supports Intel® Xeon® processor E5-2600 and E5-2600 v2 family†
• Up to 1TB ECC DDR3, up to 1866MHz; 16x DIMM slots
• 3x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards, opt.), 1x PCI-E 3.0 x8 (in x16) LP slot
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Intel X540 Dual port 10GBase-T
• 4x Hot-swap 2.5" SATA3 Drive Bays
• 1600W Redundant Power Supplies Platinum Level (94%+)
• 10x Counter rotating fans w/ optimal fan speed control
• Smart server management tools
SuperServer SYS-1027GR-TRT2

Supermciro 1027GR-TRT2 1U Rackmount Barebone with 1600W Redundant Power Supplies, Intel® C602 Chipset support 4x Hot-swap 2.5" SATA3 Drive Bays using Supermciro
X9DRG-HTF+II Server Motherboard and CSE-118GH-R1K66B 1U Rackmount Chassis.

Product SKU
SuperServer 1027GR-TRT2 (Black)
Motherboard
        Super X9DRG-HTF+II
Processor/Cache
CPU Dual Socket R (LGA 2011)
Intel® Xeon® processor E5-2600 and E5-2600 v2 family† (up to 130W TDP)
Cache Up to 30MB
System Bus QPI up to 8 GT/s
Note † BIOS version 3.0 or above is required
  Please contact WillJaya Technical support for additional information
GPU/Xeon Phi
Support
M2090, up to 130W CPU at 30°C
M2075, up to 130W CPU at 35°C
K10/K20/K20X/K1/K2 (Kepler), up to 130W CPU at 30°C
Xeon Phi, up to 130W CPU at 30°C
System Memory
Memory Capacity 16x 240-pin DDR3 DIMM slots
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC Registered memory (RDIMM)
Up to 128GB DDR3 ECC and non-ECC UDIMM
Memory Type 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
Memory Voltage 1.5 V, 1.35 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset Intel® C602 Chipset
SATA SATA 2.0 3Gbps with RAID 0, 1, 5, 10
SATA 3.0 6Gbps with RAID 0, 1
IPMI Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Connectivity

Intel® X540 Dual Port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

VGA Nuvoton WPCM450 BMC
Input/Output
SATA

2x SATA3 (6Gbps) ports
2x SATA2 (3Gbps) ports

LAN 2x RJ45 Gigabit Ethernet LAN ports
1x RJ45 Dedicated IPMI LAN port
USB 2x USB 2.0 ports
Video 1x VGA Connector
Serial Port 1x Serial header
System Bios
BIOS Type

16Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

Plug and Play (PnP)
APM 1.2
DMI 2.3
PCI 2.3
ACPI 1.0 / 2.0 / 3.0
USB Keyboard support
SMBIOS 2.7.1
UEFI







Chassis
Form Factor 1U Rackmount
Model CSE-118GH-R1K66B
Dimension and Weight
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 30.6" (777mm)
Gross Weight 48 lbs (21.8 kg)
Available Color Black
Front Panel
Buttons Power On/Off button
System Reset button
LED Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED / Fan fail LED / UID LED
Expansion Slots
PCI-Express

3x PCI-E 3.0 x16 slots (3x GPU/Xeon Phi cards optional)
1x PCI-E 3.0 x8 (in x16) low-profile slot

Drive Bays
Hot Swap 4x 2.5" Hot-swap drive bays
System Cooling
Fans 10x counter-rotating fans with optimal fan speed control
Power Supply
  1600W 1U Redundant Power Supplies with PMBus
Total Output Power 1000W/1600W
Dimension
(W x H x L)
73.5 x 40 x 265 mm
Input 100-127Vac / 12.9A Max / 47-63Hz
200-240Vac / 9.5A Max / 47-63Hz
+12V Max: 82A / Min: 0.1A (100-127Vac)
Max: 132A / Min: 0.1A (200-240Vac)
12V SB Max: 2A / Min: 0.2A
Output Type 25 Pairs Gold Finger Connector
Certification Platinum Level (94%)
PC Health Monitoring
CPU Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
CPU Core 6-Phase-switching voltage regulator
FAN Total of ten 4-pin PWM fans
10x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 10x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
LED Power Fail / Overheat LED
Suspend-state Indicator LED
UID LED
Other Features SDDC Support
Operating Environment / Compliance
RoHS RoHS Compliant
Environmental Spec. Operating Temperature: 5°C to 35°C (41°F to 95°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)


Copyright © 2014-present Will Jaya Inc. All rights reserved.