Supermicro 1U Rackmount SuperServer SYS-1015B-M3B

Call for price
In stock
SKU
SYS-1015B-M3B

Key Features:
• Intel® Xeon® 3200 Series, Xeon® 3000 Series in LGA775 Package
  (FSB 1333/1066/800)
• Up to 8GB unbuffered ECC / non-ECC DDR2 800/677 SDRAM
• 1 (x8) PCI-Express Slot
• Intel® Dual 82574L PCI-e Gigabit Controllers
• On board Winbond® integrated Graphics
• 8 x 2.5" Hot-swap SAS Drive Trays
• 560W 85%+ High-efficiency Power Supply
• On board IPMI with dedicated LAN

SuperServer SYS-1015B-M3B Rackmount

Supermicro SYS-1015B-M3B Rackmount with Intel® 3210 chipset, 8x 2.5" Hot-swap SAS / SATA drive bays, using Super X7SB3-F and CSE-113MTQ-560CB Rackmount Chassis


Product SKU
SuperServer 1015B-M3B (Black)
Motherboard
        Super X7SB3-F
Processor/Cache
CPU

Single LGA775 ZIF Socket
Supports Quad-Core Intel® Xeon® X3300/X3200 series
Supports Dual-Core Intel® Xeon® E3100/3000 series
Supports Intel® Xeon® processor L3360 and L3110 series
Supports Intel® Coreâ„¢2 Quad Q9000/Q8000/Q6000 series
Supports Intel® Coreâ„¢2 Duo E8000/E7000/E6000/E4000 series
Supports Intel® Pentium® E5000/E2000 series
Supports Intel® Celeron® E1000 and 400 series
NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.

System Bus 1333 / 1066 / 800 MHz system bus
System Memory
Memory Capacity Four 240-pin DIMM sockets
Supports up to 8 GB of memory (Dual Channel)
Memory Type DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes 256 MB, 512 MB, 1 GB, 2GB, 4GB
Memory Voltage 1.8V only
On-Board Devices
Chipset

Intel 3210 chipset
ICH9 +2x Intel® 82574L + LSI 1068E

SAS

LSI SAS1068E
RAID 0, 1, 10 support
(Optional: AOC-IButton68) RAID 5 support

Serial ATA  Intel® ICH9 SATA2 (3 Gbps) controller built-in
IPMI On board IPMI with dedicated LAN
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Winbond® WCPM450
Network Controllers  2x Single-port Gigabit PCI-Express Ethernet Controllers
Intel® 82574L
Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
VGA On-board Winbond® integrated Graphics
Super I/O Winbond 83627DHG chip
Clock Generator CK505
Input/Output
SAS 8 SAS / SATA ports
Serial ATA Two Serial ATA ports (3 Gbps performance)
Two SATA hard drives supported
Floppy 1 Floppy controller; 1.44 MB
LAN 2x RJ45 LAN ports
USB Up to 8x USB 2.0 / 1.1 compliant ports
2 rear ports
2 internal headers + 2 on-board
VGA

1x VGA port

Keyboard / Mouse

PS/2 keyboard and mouse ports

Serial Port / Header

1x Fast UART 16550 serial port
1x internal header

System Bios
Bios Type 16Mb Flash EEPROM with Phoenix BIOS®
Bios Features

Plug and Play (PnP)
DMI 2.3 support
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support

 

Chassis
Form Factor 1U Rackmount
Model CSE-113MTQ-560CB
Dimension and Weight
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 20" (508mm)
Weight 10 lbs (4.5kg)
Available Color Black
Front Panel
Buttons

Power On/Off button
System Reset button

LEDs Power Status LED
Hard drive activity LED
2x Network activity LEDs
Expansion Slots
PCI-Express

1 (x8) PCI-e slot

Drive Bays
Hot-swap

8x 2.5" Hot-swap SAS / SATA drive bays

SAS/SATA Backplane
 

1x SAS / SATA Backplane

System Cooling
Fans 4x 40x28mm high-efficiency fans
6x fans maximum
Power Supply
  560W AC to DC power supply w/ PFC
AC Voltage 100-240 V, 50-60 Hz, 6.5-2.6 Amp
+5V 15 Amp
+5V standby 2.0 Amp
+12V 46.5 Amp
-12V 0.5 Amp
+3.3V 15 Amp
Certification Silver Certification
PC Health Monitoring
CPU Monitors for CPU Cores ( +1.8V, +3.3V, +5, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
Adjustable CPU clock frequency ratio
FAN Total of six 4-pin fan headers
6x fans with tachometer monitoring
Status monitor with firmware / software speed control
Status monitor for on/off control
Support 3-pin fans (without speed control)
Status monitor for on/off control
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Monitor 2 (TM2) support
PECI
LED CPU / System Overheat LED
+5V Standby alert LED
Other Features Chassis intrusion detection
Chassis intrusion header
Operating Environment / Compliance
RoHS

RoHS Compliant 6/6, Pb Free

Environmental Spec.

Operating Temperature: 10°C to 40°C (50°F to 104°F)
Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)

Copyright © 2014-present Will Jaya Inc. All rights reserved.