Supermicro 1U Rackmount Server SYS-1018GR-T

Call for price

In stock

SKU

SYS-1018GR-T

Key Features:
• Single socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4â€ / v3 and E5-1600 v4â€ / v3 family
• Up to 1TBâ€ ECC 3DS LRDIMM , up to DDR4- 2400â€ MHz ; 8x DIMM slots
• 2x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards), 1x PCI-E 3.0 x8 low-profile slot
• Integrated IPMI 2.0 with KVM and Dedicated LAN
• Intel® i350 Dual-Port GbE Controller
• 6x 2.5" Hot-swap drive bays
• 1400W High-efficiency Power Supply Platinum Level (94%+) Digital Switching Control & PMBus 1.2
• 8x Counter rotating fans w/ optimal fan speed control

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-1018GR-T

Supermicro 1018GR-T 1U Rackmount barebone with 1400W High-efficiency Power Supply, Intel® C612 Chipset support 6x 2.5" Hot-swap drive bays using Supermicro X10SRG-F Server
motherboard and CSE-118GTS-1K43BP 1U Rackmount Chassis.

Product SKU
SYS-1018GR-T	SuperServer 1018GR-T (Black)

Motherboard
	Super X10SRG-F

Processor/Cache
CPU	Intel® Xeon® processor E5-2600 v4â€ / v3, E5-1600 v4â€ / v3 family (up to 145W TDP **) Single Socket R3 (LGA 2011)
Core/Cache	Up to 22 Coresâ€ / Up to 55MBâ€ Cache
Note	â€ BIOS version 2.0 or above is required
	** Motherboard supports this maximum TDP. Please verify your system can thermally support

System Memory
Memory Capacity	8x 288-pin DDR4 DIMM slots Up to 1TB ECC 3DS LRDIMM Up to 512GB ECC LRDIMM Up to 512GB ECC RDIMM
Memory Type	2400â€ / 2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs
DIMM Sizes	3DS LRDIMM: 128GB LRDIMM: 64GB, 32GB RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
Memory Voltage	1.2 V
Error Detection	Corrects single-bit errors

On-Board Devices
Chipset	Intel® C612 chipset
SATA	SATA3 (6Gbps) via C612 controller RAID 0, 1, 5, 10 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC
Network Connectivity	Intel® i350 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics	Matrox G200eW

Input/Output
SATA	6x SATA3 (6Gbps) ports
LAN	2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port
USB	2x USB 3.0 ports (rear)
Video	1x VGA Connector
Serial Port/Header	2x Fast UART 16550 ports / 1 rear and 1 header

System Bios
Bios Type	128Mb SPI Flash EEPROM with AMI BIOS
Bios Features	Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.7.1 UEFI 2.3.1 RTC (Real Time Clock) Wakeup

Chassis
Form Factor	1U Rackmount
Model	CSE-118GTS-1K43BP

Dimension and Weight
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	28.5" (724mm)
Gross Weight	36 lbs (16.33 kg)
Available Color	Black

Front Panel
Buttons	Power On/Off button System Reset button
LED	Power LED Hard drive activity LED 2x Network activity LEDs System Overheat LED / Fan fail LED / UID LED

Expansion Slots
PCI-Express	2x PCI-E 3.0 x16 slots (support GPU/Xeon Phi cards) 1x PCI-E 3.0 x8 slot for I.B. card UIO AOC Compatibility Matrix

Drive Bays
Hot Swap	6x 2.5" Hot-swap drive bays

System Cooling
Fans	8x counter-rotating fans with optimal fan speed control

Power Supply
	1400W High-efficiency AC power supply with Digital Switching Control & PMBus 1.2
AC Voltage	1200W: 100-140 V, 14.7-10.5A, 50-60 Hz 1400W: 180-240 V, 10.5-8.0A, 50-60 Hz
+5V standby	6 Amp
+12V	100 Amp/115 Vac 117 Amp/230 Vac
With Power Distributor	+5V: 14 Amp
Certification	Platinum Certified

PC Health Monitoring
CPU	Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. CPU Core 5-Phase-switching voltage regulator
FAN	Total of eight 4-pin PWM fans 8x fans with tachometer monitoring Status monitor for speed control Status monitor for on/off control Low noise fan speed control
Temperature	Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors PSU I2C temperature sensing logic Thermal Monitor 2 (TM2) support PECI
LED	Power Fail / Overheat LED Suspend-state Indicator LED UID LED
Other Features	SDDC Support

Operating Environment / Compliance
RoHS	RoHS Compliant
Environmental Spec.	Operating Temperature: 5Â°C to 35Â°C (41Â°F to 95Â°F) Non-operating Temperature: -40Â°C to 70Â°C (-40Â°F to 158Â°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing)