Supermicro 1U Rackmount Dual Core Server SYS-6014V-M4

Call for price

In stock

SKU

SYS-6014V-M4

Key Features:
• Dual Intel® 64-bit Xeon® Support, up to 3.60 GHz, 800 MHz FSB
• Up to 12GB DDR 333 SDRAM (or) Up to 24GB DDR 266 SDRAM
• 1 x 64-bit 133MHz Full-height / Half-length PCI-X Slot
• 2x Dual Intel® 82541GI Gigabit Ethernet Controllers
• 4 x 3.5" Ultra320 SCSI Hot-swap Drive Bays
• 420W Power Supply
• 2x Front Side USB 2.0 Ports and 1x Front Sider Serial Port

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

SuperServer SYS-6014V-M4 / SYS-6014V-M4B 1U Rackmount

Supermicro SYS-6014V-M4 / SYS-6014V-M4B 1U Rackmount with 420W Power Supply,Intel® E7320 chipset, 4x 3.5" Hot-swap Ultra320/160 SCSI drive bays, using Supermicro
Super X6DVA-4G Motherboard and SC813MS-420C Rackmount Chassis

Product SKU
SYS-6014V-M4	SuperServer 6014V-M4 (Beige)
SYS-6014V-M4B	SuperServer 6014V-M4B (Black)

Motherboard
	Super X6DVA-4G

Processor/Cache
CPU	Dual 604-pin FC-mPGA4 Sockets Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below: Xeon (Nocona) CPU with 1MB L2 Integrated Advanced Transfer Cache, up to 3.60 GHz Xeon (Irwindale) CPU with 2MB L2 Integrated Advanced Transfer Cache, up to 3.80 GHz Xeon LV (Low Voltage) CPU, up to 2.8 GHz
System Bus	800 MHz system bus

System Memory
Memory Capacity	Six 184-pin DIMM sockets Supports up to 12 GB DDR 333MHz memory or Supports up to 24 GB DDR 266MHz memory Dual-channel memory bus Memory must be populated in pairs
Memory Type	DDR333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes	256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage	2.5 V only
Error Detection	Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 Single Device Data Correction (SDDC)

On-Board Devices
Chipset	Intel® E7320 chipset MCH + 6300ESB + PXH +82541GI
SATA	6300ESB (Hance Rapids) SATA Controller (2x Drive support) 2x SATA Ports RAID 0, 1, JBOD support
SCSI	LSI 1020 U320 SCSI Controller Single-Channel Ultra320 SCSI Host RAID 1 support
IPMI	Support for Intelligent Platform Management Interface v.2.0 (Optional)
Network Controllers	Dual Intel® 82541GI Single Port Gigabit Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Graphics	ATI Rage XL SVGA PCI video controller with 8 MB of video memory
Super I/O	Winbond 83627HF chip

Expansion Slots
PCI-Express / PCI-X	1x 64-bit PCI-X 133MHz slot (Riser card required)

Input/Output
IDE	Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy	1 Floppy controller; 1.44 MB, 2.88 MB, 3-mode support
LAN	2x RJ45 LAN port
USB	2x USB rear ports 2x USB internal headers USB 2.0 Compliant / 1.1 Compliant
VGA	1x VGA Port
Keyboard / Mouse	PS/2 keyboard and mouse ports
Serial Port / Header	2 Fast UART 16550 serial ports
Parallel Port	1 ECP/EEP parallel port header

System Bios
Bios Type	8Mb Flash EEPROM with AMI® BIOS
Bios Features	Plug and Play (PnP) SMBIOS 2.3 APM 1.2 DMI 2.1 ACPI 1.0

Chassis
Form Factor	1U Rackmount
Model	SC813MS-420C

Dimension and Weight
Height	1.7" (43mm)
Width	17.2" (437mm)
Depth	19.8" (503mm)
Weight	38 lbs (17.2kg)
Available Color	Beige,Black

Front Panel
Buttons	Power On/Off button System Reset button
LEDs	Power LED Hard Drive Activity LED 2x Network activity LEDs System Overheat / Fan Fail LED
Ports	2x USB Ports (USB 2.0 Ready) 1x Serial COM Port

Drive Bays
Hot-swap	4x 3.5" Hot-swap Ultra320/160 SCSI drive bays

Peripheral Drives
CD-ROM	TEAC Slim 24x CD-ROM drive

SCSI Backplane
	Single Channel SCSI Backplane w/ SAF-TE

System Cooling
Fans	4x 4cm fans

Power Supply
	Fixed 420W AC power supply with PFC [ 24-pin, (4-pin, 8-pin=12V) ]
AC Voltage	100 - 240V, 60-50Hz, 7 Amp
DC Output	5V + 3.3V â‰¤ 160W 12V1 + 12V2 + 12V3 â‰¤ 32 Amp
+5V	30.0 Amp
+5V stand by	2.0 Amp
+12V1	15 Amp
+12V2	15 Amp
+12V3	18 Amp
-12V	1.0 Amp
+3.3V	20 Amp

Regulatory (Power Supply)
Safety / EMC	USA - UL Listed, FCC Canada - CUL Listed Germany - TUV Certified Europe / CE Mark EN 60950/IEC 60950-Compliant

PC Health Monitoring
CPU	Monitors for CPU Cores, +3.3V, +5V, Â±12V & +5V Standby CPU Core 3-Phase-switching voltage regulator with auto-sense from 1.3V-1.5V Adjustable CPU clock frequency ratio settings (via BIOS)
FAN	Total of six 4-pin fan headers 6x fans with status monitoring Status monitor with firmware/software on/off control Low noise fan speed control Pulse Width Modulated (PWM) fan connector
Temperature	Monitoring for CPU, chassis, environment CPU thermal trip support Thermal Monitor 2 (TM2) support
LED	CPU Overheat LED System Overheat LED Suspend-state indicator LED
Other Features	Chassis intrusion detection Chassis intrusion header SDDC