Supermicro 1U Rackmount Dual Core Server SYS-6014H-TB
Key Features:
• Dual Intel® 64-bit Xeon® Support up to 3.60 GHz
• Up to 16GB DDR 333 SDRAM (or) Up to 32GB DDR 266 SDRAM
• 1 (x8) PCI-Express Slot OR 1 x 64-bit 133MHz Full-height / length
PCI-X Slot
• 1 (x8) PCI-Express Slot OR 1 x 64-bit 100MHz Low-profile
PCI-X Slot
• 2 x Intel® 82546GB Gigabit Ethernet Ports
• Zero Channel RAID Support
• 4 x 3.5" SATA Drive Bays
• 500W Cold-swap Power Supply with I2C for Remote Management
Supermicro SYS-6014H-T / SYS-6014H-TB 1U Rackmount with 500W Cold-swap Power Supply,Intel® E7520 chipset,4x 3.5"SATA Hot-swap drive bays, using Supermicro
Super X6DHR-TG
Motherboard and SC813T-500 Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-6014H-T | SuperServer 6014H-T (Beige) |
| SYS-6014H-TB | SuperServer 6014H-TB (Black) |
Motherboard |
|
|---|---|
| Super X6DHR-TG | |
Processor/Cache |
|
|---|---|
| CPU | Dual 604-pin FC-mPGA4 Sockets |
| System Bus | 800 MHz system bus |
System Memory |
|
|---|---|
| Memory Capacity |
Eight 184-pin DIMM sockets Supports up to 32GB DDR 266MHz or up to 16GB DDR 333MHz memory Dual-channel memory bus Dual-channel memory bus Memory must be populated in pairs Single-rank modules are recommended for 6+ DIMM support |
| Memory Type | DDR 333/266MHz buffered (registered) ECC SDRAM, 184-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB** |
| Memory Voltage | 2.5 V only |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 Single Device Data Correction (SDDC) |
On-Board Devices |
|
|---|---|
| Chipset | Intel® E7520 chipset |
| SATA | ICH5R SATA 2-port Controller |
| SATA | Marvell® 4-port SATA Controller |
| Zero-Channel SATA | Supports RAID 0, 1, 5, 10, JBOD |
| IPMI | Support for Intelligent Platform
Management Interface v.2.0 (Optional: Card not included) |
| Network Controllers | Intel® 82546GB Dual Port Gigabit Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| Super I/O | Winbond 83627HF chip |
| Clock Generator | ICS9325208BG |
Expansion Slots |
|
|---|---|
| PCI-Express / PCI-X |
2 x Universal (SXB-E) slots
[ 2 (x8) PCI-Express Slots ] OR [ 1x 64-bit PCI-X 133MHz slot and 1x 64-bit PCI-X 100MHz slot] |
Input/Output |
|
|---|---|
| Serial ATA | Up to Four SATA hard drives supported |
| IDE | Dual EIDE channels support up to four UDMA IDE devices |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN port |
| USB | 2x USB rear ports |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 1 Fast UART 16550 serial ports / 1 header
|
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | SC813S-500 |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 25.6" (650mm) |
| Weight | 38 lbs (17.2kg) |
| Available Color | Beige,Black |
Front Panel |
|
|---|---|
| Buttons | Power On/Off button |
| LEDs | Power LED Hard Drive Activity LED 2x Network activity LEDs System Overheat / Fan Fail LED |
| Ports | 2x USB & DB9 COM port tray (Optional - in place of floppy drive) |
Drive Bays |
|
|---|---|
| Hot-swap | 4x 3.5"SATA Hot-swap drive bays |
Peripheral Drives |
|
|---|---|
| Floppy | TEAC 3.5" 1.44MB Slim Floppy Drive |
| CD-ROM | TEAC Slim 24x CD-ROM drive |
SATA Backplane |
|
|---|---|
1x 1U Serial ATA backplane |
|
System Cooling |
|
|---|---|
| Fans | 2x 10cm blower fans |
Power Supply |
|
|---|---|
| Cold-swappable 500W AC power supply module w/ PFC [ 20-pin, (4-pin, 8-pin) = 12V ] | |
| AC Voltage | 100 - 240V, 60-50Hz, 10 Amp |
| DC Output | 5V + 3.3V ≤ 160W |
| +5V | 30.0 Amp |
| +5V stand by | 2.0 Amp |
| +12V1 | 15 Amp |
| +12V2 | 15 Amp |
| +12V3 | 18 Amp |
| -12V | 1.0 Amp |
| +3.3V | 21 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +5V Standby, +3.3V Standby, & VBAT |
| FAN | Total of five 3-pin fan headers Status monitor for speed control |
| Temperature | Monitoring for CPU, chassis, environment CPU thermal trip support Thermal Monitor 2 (TM2) Support |
| LED | CPU / System Overheat LED |
| Other Featue | Chassis intrusion detection |
System Bios |
|
|---|---|
| Bios Type | 8Mb Flash EEPROM with Phoenix® BIOS |
| Bios Features | USB Keyboard Support
|