Supermicro 1U Rackmount Dual Core Server SYS-6014H-i2B
Key Features:
• Dual Intel® 64-bit Xeon® Support up to 3.60 GHz
• Up to 16GB DDR2 400MHz SDRAM
• 1 (x8) PCI-Express Expansion Slot OR 1 x 64-bit 133MHz
Full-height / length PCI-X Slot
• 1 (x4) on a (x8) PCI-Express Slot OR 1 x 64-bit 100MHz
Low-profile PCI-X Slot
• 2 x Intel® 82546GB Gigabit Ethernet Ports
• 3 x 3.5" Fixed IDE Drive Bays
• 420W Power Supply
Supermicro SYS-6014H-i2 / SYS-6014H-i2B 1U Rackmount with 520W Power Supply,Intel® E7520 chipset, 3 x 3.5" Fixed Drive Bays, using Supermicro
Super X6DHR-iG2
Motherboard and SC812i-420 Rackmount Chassis
Product SKU |
|
|---|---|
| SYS-6014H-i2 | SuperServer 6014H-i2 (Beige) |
| SYS-6014H-i2B | SuperServer 6014H-i2B (Black) |
Motherboard |
|
|---|---|
| Super X6DHR-iG2 | |
Processor/Cache |
|
|---|---|
| CPU | Dual 604-pin FC-mPGA4 Sockets |
| System Bus | 800 MHz system bus |
System Memory |
|
|---|---|
| Memory Capacity |
Eight 240-pin DIMM sockets Supports up to 16 GB DDR2 400MHz memory Dual-channel memory bus Memory must be populated in pairs Single-rank modules are recommended for 6+ DIMM support |
| Memory Type | DDR2 400MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1GB, 2GB, 4GB** |
| Memory Voltage | 1.8V only |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 Single Device Data Correction (SDDC) |
On-Board Devices |
|
|---|---|
| Chipset | Intel® E7520 chipset |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 (Optional) |
| Network Controllers | Intel® 82546GB Dual Port Gigabit Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | ATI Rage XL SVGA PCI video controller with 8 MB of video memory |
| Super I/O | Winbond 83627HF chip |
Expansion Slots |
|
|---|---|
| PCI-Express / PCI-X |
2 x Universal (SXB-E) slots
[ 2 (x8) PCI-Express Slots ] OR [ 1x 64-bit PCI-X 133MHz slot + 1x 64-bit PCI-X 100MHz slot ] |
Input/Output |
|
|---|---|
| IDE | Dual EIDE channels support up to four UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| Floppy | 1 Floppy controller; 1.44 MB, 2.88 MB |
| LAN | 2x RJ45 LAN port |
| USB | 2x USB rear ports |
| VGA | 1x VGA Port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 2 Fast UART 16550 serial ports
|
Chassis |
|
|---|---|
| Form Factor | 1U Rackmount |
| Model | SC812i-420 |
Dimension and Weight |
|
|---|---|
| Height | 1.7" (43mm) |
| Width | 16.8" (426mm) |
| Depth | 25.6" (650mm) |
| Weight | 38 lbs (17.2kg) |
| Available Color | Beige,Black |
Front Panel |
|
|---|---|
| Buttons | Power On/Off button |
| LEDs | Power LED Hard Drive Activity LED 2x Network activity LEDs System Overheat / Fan Fail LED |
| Ports | 2x USB Ports (USB 2.0 Ready) 1x RJ45 COM Port |
Drive Bays |
|
|---|---|
| Internal Bay | 3 x 3.5" Fixed Drive Bays |
Peripheral Drives |
|
|---|---|
| Floppy | TEAC 3.5" 1.44MB Slim Floppy Drive |
| DVD-ROM | TEAC Slim 24x CD-ROM drive |
System Cooling |
|
|---|---|
| Fans | 2x 10cm blower fans |
Power Supply |
|
|---|---|
| 420W AC power supply w/ PFC [ 20-pin, (4-pin, 8-pin) = 12V ] | |
| AC Voltage | 100 - 240V, 50/60Hz, 7-4 Amp |
| DC Output | 5V + 3.3V ≤ 160W |
| +5V | 30 Amp |
| +5V stand by | 2.0 Amp |
| +12V1 | 15 Amp |
| +12V2 | 15 Amp |
| +12V3 | 18 Amp |
| -12V | 1.0 Amp |
| +3.3V | 20 Amp |
PC Health Monitoring |
|
|---|---|
| CPU | Monitors for CPU Cores, +3.3V, +5V, ±12V & +5V Standby |
| FAN | Total of five 3-pin fan headers 5x fans with status monitoring Status monitor with firmware/software on/off control Fan speed control |
| Temperature | Monitoring for CPU, chassis environment CPU thermal trip support Thermal Monitor 2 support |
| LED | CPU / System Overheat LED |
| Other Featue | Chassis intrusion detection Chassis intrusion header SDDC support |
System Bios |
|
|---|---|
| Bios Type | 8Mb Flash EEPROM with Phoenix® BIOS |
| Bios Features | Plug and Play (PnP) |