Supermicro 1U Rackmount A+ Servers AS-1022TC-TF
Key Features:
• Two systems (nodes) 24 Core in a 1U
• Dual AMD Opteron„¢ 4000 series processors
• Up to 192GB of memory
• 2x Hot-swappable SATA Hard Drive Bays
• 1 Low Profile PCI-E Gen2.0 x16 expansion slot
• 920W High-efficiency Power Supply Platinum
|
Product SKU
| |
|---|---|
| AS-1022TC-TF | • A+ Server 1022TC-TF (Black) |
|
Motherboard
| |
|---|---|
| • Super H8DCT-F | |
| Processor/Cache
|
|
|---|---|
| CPU | • Dual 1207-pin Socket C32 • Supports two 8/6/4-Core ready AMD Opteron„¢ 4000 Series processors • HT3.0 Link support |
| Chipset | • AMD SR5670 + SP5100 Chipset |
|
System Memory (per node)
| |
|---|---|
| Memory Capacity | • 12 DIMM sockets • Support up to 192GB Registered ECC or 64GB Unbuffered ECC/non-ECC DDR3 1600/1333/1066 SDRAM in 12 DIMMs • Dual channel memory bus • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks |
| Memory Type | • DDR3 1600/1333/1066 MHz Registered ECC or Unbuffered ECC/non-ECC SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 32GB, 16GB, 8GB, 4GB, 2GB, 1GB |
| Memory Voltage | • 1.35V or 1.5V |
|
On-Board Devices (per node)
| SATA | • AMD SP5100 (RAID 0, 1) | IPMI | • Support for Intelligent Platform Management Interface v.2.0 • IPMI 2.0 with virtual media over LAN and KVM over LAN support • Winbond® WPCM450 BMC |
|---|---|
| Network Controllers | • Intel® 82576 controller, Dual-Port
Gigabit Ethernet • 10/100/1000BASE-T support |
| VGA |
• Matrox G200eW 16MB DDR2 |
| Super I/O | • Winbond® W83527 chip |
|
Input/Output (per node)
| SATA | • 4x SATA (3Gb/s) ports | LAN | • 2 RJ45 LAN ports • 1 RJ45 Dedicated LAN supports IPMI |
|---|---|
| USB | • 4x USB 2.0 ports • 2x Rear, 1x header (2 ports) |
| VGA | • 1x VGA port |
| Serial Ports | • 1x Fast UART 16550 serial port |
|
Expansion Slots (per node)
| PCI-E | • 1 Low Profile PCI-E Gen2.0 x16 expansion slot |
|---|
|
System BIOS
| |
|---|---|
| BIOS Type | • 16Mb SPI Flash ROM with AMI® BIOS |
| BIOS Features |
• Plug and Play (PnP) |
|
Chassis
| |
|---|---|
| Form Factor | • 1U Rackmount |
| Model | • CSE-808T-920B |
|
Dimension and Weight
| |
|---|---|
| Height | • 1.7" (43mm) |
| Width | • 17.2" (437mm) |
| Depth | • 27.75" (705mm) |
| Gross Weight | • 39 lbs (17.7kg) |
| Available Colors | • Black |
|
Front Panel
| |
|---|---|
| Buttons | •
Buttons
Power On/Off button |
| LEDs |
• Power LED |
|
Drive Bays (per node)
| |
|---|---|
| Hot-swap | •
Hot-swap
2x 3.5" SATA hard drive bays |
|
System Cooling
| |
|---|---|
| Fans | • 6x counter-rotating PWM fans w/ Optimal Fan Speed Control |
|
Power Supply w/Power Distributor
| |
|---|---|
| 920W high-efficiency (94+%) power supply with PMBus | |
| AC Input | • 100-240 V, 50-60 Hz, 11-4.5 Amp |
| DC Output |
• 4 Amp @ +5V standby • 75 Amp @ +12V |
| Certification | • Platinum Certified |
|
PC Health Monitoring
| |
|---|---|
| CPU | • Monitors CPU Core Voltages, +3.3V, +5V, +12V, 5V Standby, VBAT |
| FAN | • Total up to five 4-pin fan headers • 6 Fan Status Tachometer monitoring • Status Monitor for Speed Control |
| Temperature | • Monitoring for CPU and chassis environment • CPU Thermal Trip support • I2C temperature sensing logic |
| LED | • CPU / Overheat LED • Suspend-state indicator LED • +5V Standby Alert LED |
| Other Features | • Chassis Intrusion Header • Chassis Intrusion Detection • Chipkill Support |
|
Operating Environment / Compliance
| |
|---|---|
| RoHS |
• RoHS Compliant |
| Environmental Spec. | • Operating Temperature:
10°C to 35°C (50°F to 95°F) • Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) • Operating Relative Humidity: 8% to 90% (non-condensing) • Non-operating Relative Humidity: 5% to 95% (non-condensing) |