Supermicro 1U Rackmount A+ Server AS-1020S-8B

Call for price

In stock

SKU

AS-1020S-8B

Key Features:
• Dual AMD Opteron„¢ 200 Series Processors
• Up to 32GB of memory
• 1 64-bit 133MHz Low-Profile PCI-X Slo
• Zero Channel RAID Support
• 4 x 3.5" Ultra320 SCSI Hot-swap Drive Bays
• 500W Cold-swap Power Supply

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Details

Supermicro 1U Rackmount A+ Server AS-1020S-8B

Product SKU
AS-1020S-8	• A+ Server 1020S-8 (Beige)
AS-1020S-8B	• A+ Server 1020S-8B (Black)

Motherboard
	• H8DSR-8

Processor/Chipset
CPU	• Dual 940-pin ZIF Sockets • Supports up to two Dual-Core AMD Opteron„¢ 200 Series processor(s) • 1MB Cache • VRM x3
Chipset	• ServerWorks HT2000 • ServerWorks HT1000

System Memory
Memory Capacity	• Eight 184-pin DIMM sockets • Supports up to 16 GB DDR 400 MHz memory or • Supports up to 32 GB DDR 333 MHz memory or • Supports up to 32 GB DDR 266 MHz memory • Single or Dual (recommended) channel memory support • For Single CPU: Memory must be populated in the adjacent memory bank • For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type	• DDR 400/333/266MHz buffered (registered) ECC SDRAM 72-bit, 184-pin gold-plated DIMMs
DIMM Sizes	• 256 MB, 512 MB, 1GB, 2GB, 4GB**
Memory Voltage	• 2.5 V only
Error Detection	• Corrects single-bit errors • Detects double-bit errors (using ECC memory)

On-Board Devices
IDE	• Supports UDMA Mode 5 • Supports PIO Mode 4 • Supports ATA/100
SCSI	• Adaptec AIC-7902W Controller • Dual-Channel Ultra320 SCSI with Host RAID • Host RAID 0, 1, 10, JBOD
Zero Channel RAID	• Support for Zero-Channel RAID
IPMI	• Intelligent Platform Management Interface v.2.0+ • (Optional: 1UIPMI-B ) 1U Support • (Optional: 1UIPMI-B + 1UIPMI-LANG) for 3rd LAN port support with IPMI • RMM (Remote Management Module) • (Card not included)
Network Controllers	• ServerWorks® HT2000 Dual Gigabit Ethernet Controller • Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA	• ATI Rage XL 8MB PCI Graphics Controller • VGA Port
Super I/O	• NS PC87427
Clock Generator	• ICS932S801AG

Expansion Slots
PCI-Express	• 2 PCI-e x8 slots (Optional with PCI-e Riser Card)
PCI-X	• 1 64-bit 133MHz PCI-X (3.3V) slot (Low-Profile) • 1 64-bit 100MHz PCI-X (3.3V) slot (Full-height / Full-length)
IPMI	• IPMI 2.0 expansion slot

Input/Output
SCSI	• 2-Channel Ultra320 SCSI • AIC7902 SCSI Controller • SCSI ZCR Support
Floppy	• 1 Floppy port; 1.44 MB
LAN	• 2 RJ45 LAN port
USB	• FUCI • 2 USB Rear Ports • 2 USB Internal Headers • USB 2.0 Compliant, 1.1 Compatible
Keyboard/Mouse	• PS/2 keyboard and mouse ports
Serial Ports	• 1 Fast UART 16550 serial ports • 1 Header

Chassis
Form Factor	• 1U Rackmount
Model	• SC813S+-500

Dimension and Weight
Height	• 1.7" (43mm)
Width	• 17.2" (437mm)
Depth	• 25.6" (650mm)
Gross Weight	• 36 lbs (16.4kg)
Available Colors	• Beige, Black

Front Panel
Buttons	• Power On/Off button • System Reset button
LEDs	• Power LED • Hard drive activity LED • 2x Network activity LEDs • System Overheat LED

Drive Bays
Hot-swap	• 4 x 3.5" hot-swap SCSI Drive Bays with SAF-TE

Peripheral Drives
Floppy	• 3.5" 1.44MB Slim Floppy Drive
CD-ROM	• Slim 24x CD-ROM drive

SCSI Backplane
	• 4 x 3.5" SCSI HDD Backplane

System Cooling
Fans	• 4x 10,200 RPM counter rotating fans

Power Supply
	Cold-swappable 500W AC power supply module with PFC [ 20-pin, (4-pin, 8-pin = 12V) ]
AC Voltage	• 100 - 240V, 60-50Hz, 10 Amp Max
DC Output	• 5V + 3.3V ‰¤ 160W
+5	• 30.0 Amp
+5V standby	• 2.0 Amp
+12V	• 39.0 Amp
$3.3V	• 21.0 Amp

System BIOS
BIOS Type	• 8Mb Flash EEPROM with AMI® BIOS • SST49LF080A BIOS Chip
IOS Features	• Plug and Play (PnP) • ACPI 2.0 • PCI 2.2 • DMI 2.3 • BIOS Rescue Hot Keys • SMBIOS 2.3 • USB Keyboard support

PC Health Monitoring
CPU	• Monitors CPU Core Voltages, +5V, ±12V & +2.5V, 2.5V Standby, +5V Standby, VBAT • Monitor for HyperTransport voltage 1.2V, memory voltage 2.5V, DDR termination 1.25V • Up to 5 fan status • Supports System Management Utility
FAN	• Total of up to five 3-pin fan headers • 5 Tachometer monitoring • Status monitor for speed control • Status monitor for on/off control • Low-noise Fan Speed Control
Temperature	• Monitoring for CPU and chassis environment • CPU Thermal Trip support • PC temperature sensing logic
LED	• CPU / Overheat LED • Suspend-state indicator LED • +5V Standby alert LED
Other Features	• Features Chassis Intrusion Detection • Chassis Intrusion Header